Accuracy International AT-X

4O6shootist · Oct 23, 2024

You sure as F should be able to run production class with an atx! Throw a tangent on there too! The talent pool is pretty damn deep at a national level two day match, the equipment you're running is NOT what's getting you a trophy or points. Alwine shoots a fn savag̃e for Christ sake!

LeftyJason · Oct 23, 2024

Safety_3rd said:
Yea I am reading it as "I'm rich bitch... with my gangster ass At-x, and rich enough that I am willing to say f*ck resale value and I am going to tag my rifle with "ruger" to relate to the poors... I think we are all on the same page lol. I am just not baller enough to intentionally deface my shit with Ruger. I mean dont get me wrong, I will draw a dick on anything... but I am not associating with a Ruger lol.

Ruining the resale value? Ha ha ha ha ha.

Take something anodized. Write on it with sharpie. It will be gone with either alcohol or acetone.

blbennett1288 · Oct 23, 2024

Safety_3rd said:
I don’t get it?

Many people who have never seen an AI, think it is a Ruger RPR.

jbell · Oct 23, 2024

blbennett1288 said:
Many people who have never seen an AI, think it is a Ruger RPR.

This has actually happened to me several times. I only wish I could see the look on my face when it occurs…

Part Timer · Oct 23, 2024

jbell said:
This has actually happened to me several times. I only wish I could see the look on my face when it occurs…

Something like this, I’d imagine.

Nik H · Oct 23, 2024

blbennett1288 said:
Many people who have never seen an AI, think it is a Ruger RPR.

I get that or is it an MRAD when shooting my MC

PlinkIt · Oct 23, 2024

The RPR label was what someone thought it was in a blind bolt running test....

NoLegs24 · Oct 23, 2024

Some of the comments towards that “Ruger-X”

jbell · Oct 23, 2024

Part Timer said:
Something like this, I’d imagine.

View attachment 8530622

Ha, funny. But not exactly what was going through my mind at the time. It was more like how the hell do you not know the difference. I'm sure I had a very confused look on my face. I have gotten the same "is that a Savage?" When I am shooting my TRG, SSG3000, & various Vudoo builds. I'm pretty sure a lot of people are not aware there are other firearms manufacturers than Remington and Savage.

shoot4fun · Oct 23, 2024

That particular rifle belongs to a Ruger employee. They are not allowed to shoot any other manufacturer's products.
The boss will never notice the difference!

bnaples · Oct 23, 2024

PlinkIt said:
The RPR label was what someone thought it was in a blind bolt running test....

This......fo sho

mr_fullmetal · Nov 13, 2024

Went back about 20 ages but I’m half asleep. What’s the shortest barrel length I can go?

Dr. Strangeglove · Nov 13, 2024

20" and still have access to the wrench flats, but an 18" will fit if you don't mind it potentially being a pain to remove.

hafejd30 · Nov 13, 2024

Here’s what an 18” looks like

Tex68w · Nov 13, 2024

hafejd30 said:
Here’s what an 18” looks like
View attachment 8545478

Who makes that barrel thread cover?

adisan77ro · Nov 24, 2024

hafejd30 said:
Here’s what an 18” looks like
View attachment 8545478

What colour is this ATX?

adisan77ro · Nov 24, 2024

Elite Sand?

hafejd30 · Nov 24, 2024

adisan77ro said:
Elite Sand?

Yes

hafejd30 · Nov 24, 2024

Tex68w said:
Who makes that barrel thread cover?

@pfl338

SFree · Nov 24, 2024

hafejd30 said:
Here’s what an 18” looks like
View attachment 8545478

Barely enough room for a suppressor… maybe?

hafejd30 · Nov 24, 2024

SFree said:
Barely enough room for a suppressor… maybe?

Plenty of room for a can. Sticks out probably 1.5”. A 16.5” would be cutting it very close

BurtG · Nov 24, 2024

18” plus loc tite TBAC NTB gives you a wrench point

hafejd30 · Nov 24, 2024

BurtG said:
18” plus loc tite TBAC NTB gives you a wrench point

This is what I would do as you loose the wrench flats with 18” or shorter as noted above

mr_fullmetal · Nov 24, 2024

so a 16.5” won’t clear the hand guard? I need to go at least 18” correct ?

Tex68w · Nov 24, 2024

Took the AT-XC out to 1000 this morning, easy button with the 6.5 Creedmoor but what a difference between a lot of factory Hornady 140 ELD-M's circa 2018 to the new/current (2024) lot fresh from the factory. Granted I shot three times as many from the new lot but man what a difference in ES and SD and the velocity was averaging a solid 40fps slower as well. I was dialing 9 mils of elevation at 1000 with the newer slower stuff and holding 1.6mils of wind for a steady 12-14mph crosswind.

2018 manu lot

2024 manu lot

gconnoyer · Nov 26, 2024

Not sure how I never meandered over here. Had my ATX now for about a year and a half, coming from a 700 Clone was quite the change.
-Competition and coyotes with a 26" 6 Dasher from Hunts Long Range
-Deer and comps for fun with the shorty 6.5

I ordered mine with the 6.5 creed barrel with full intentions of cutting it down to 16". Immediately pulled the barrel and put the chassis in the bandsaw
Saw quite a few comments/questions about a 16" setup and you absolutely can do it.

Makes it look 10x better and more functional. No clue why they made the forend so damn long.

diggler1833 · Nov 27, 2024

gconnoyer said:
Not sure how I never meandered over here. Had my ATX now for about a year and a half, coming from a 700 Clone was quite the change.
-Competition and coyotes with a 26" 6 Dasher from Hunts Long Range
-Deer and comps for fun with the shorty 6.5

I ordered mine with the 6.5 creed barrel with full intentions of cutting it down to 16". Immediately pulled the barrel and put the chassis in the bandsaw
Saw quite a few comments/questions about a 16" setup and you absolutely can do it.

Makes it look 10x better and more functional. No clue why they made the forend so damn long.

View attachment 8555108 View attachment 8555107

I think I like your bag rider better than the factory one I'm using. Mind sharing with me who made it? Thanks in advance.

IsaacL · Nov 27, 2024

diggler1833 said:
I think I like your bag rider better than the factory one I'm using. Mind sharing with me who made it? Thanks in advance.

Accessories - Pic-Mounted Bag Rider - AI AT-X

New Pic-Mounted Bag Rider - $40+Shipping This Bag Rider has been designed for the AI ATX Chassis, but is compatible with any picatinny based buttstock. If the length, angle, or bolt spacing is not a good fit for your chassis, let us know and we will custom design a bag rider for you. Website...

www.snipershide.com

gconnoyer · Nov 27, 2024

diggler1833 said:
I think I like your bag rider better than the factory one I'm using. Mind sharing with me who made it? Thanks in advance.

Its from Sokek Solutions. We worked on making it for the ATX so it dimensionally works and fits well.

Yeah, WAYYY better than the AI one and not fucking ugly lol

diggler1833 · Nov 27, 2024

Much appreciated @IsaacL and @gconnoyer

Tex68w · Nov 29, 2024

Does the AI need the MDT AR15 style grip or the chassis grip?

AF_TT · Nov 29, 2024

Tex68w said:
Does the AI need the MDT AR15 style grip or the chassis grip?

Standard chassis.

BurtG · Nov 29, 2024

99 percent sure. A ar one works fine think that’s what I use

lte82 · Nov 29, 2024

Tex68w said:
Took the AT-XC out to 1000 this morning, easy button with the 6.5 Creedmoor but what a difference between a lot of factory Hornady 140 ELD-M's circa 2018 to the new/current (2024) lot fresh from the factory. Granted I shot three times as many from the new lot but man what a difference in ES and SD and the velocity was averaging a solid 40fps slower as well. I was dialing 9 mils of elevation at 1000 with the newer slower stuff and holding 1.6mils of wind for a steady 12-14mph crosswind.

2018 manu lot

2024 manu lot

I know this range well…

Tex68w · Nov 29, 2024

lte82 said:
I know this range well…

Holler if you’re ever out there.

IsaacL · Nov 29, 2024

Tex68w said:
Does the AI need the MDT AR15 style grip or the chassis grip?

I’ve only used the chassis version but either one should work.

https://support.mdttac.com/hc/en-us...Compatible-in-the-vertical-grip-compatibility

4O6shootist · Nov 29, 2024

I've used the mdt chassis grip config on two at chassis and it works well. My experience so far anyway.

Tex68w · Nov 30, 2024

I ordered the chassis version. I just wanted to make sure I wasn’t supposed to get the AR version instead but it’s good to know that either option works.

Huckmeat · Dec 6, 2024

I'm waiting on my AT-XC, and thinking about immediatly having the foreend dimpled for R-LOCK plates and then cut down before more ceracoat. For those of you who cut down the forend, how much did you cut off? I can't see wanting it much longer than I can reach from behind the gun for adjusting bipods in field matches; It will never be way out at the end the way I use a rifle.

BurtG · Dec 6, 2024

It’s not already R lock dimpled ? Sheeit my RD15 came like that

Tex68w · Dec 6, 2024

Huckmeat said:
I'm waiting on my AT-XC, and thinking about immediatly having the foreend dimpled for R-LOCK plates and then cut down before more ceracoat. For those of you who cut down the forend, how much did you cut off? I can't see wanting it much longer than I can reach from behind the gun for adjusting bipods in field matches; It will never be way out at the end the way I use a rifle.

I personally don't see the need for the dimpling but I can understand why some might. Black Canyon I've heard is the place to send for the front end chop job.

Huckmeat · Dec 6, 2024

I was going to do the dimpling while I'm exposing aluminum and doing cerakote anyway. Black Canyon is my go to smith for everything so that works out well!

Tritiumdials · Dec 6, 2024

I don't understand how the AT-X was out for over three years and they failed to update the AT-XC chassis with easy features like thumb rest provisions, R-Lock, and adjustable magazine latch.

BurtG · Dec 6, 2024

Tritiumdials said:
I don't understand how the AT-X was out for over three years and they failed to update the AT-XC chassis with easy features like thumb rest provisions, R-Lock, and adjustable magazine latch.

How long have you been following AI and their updates and thought processes on what the user wants ?

They are HK lite

adisan77ro · Dec 7, 2024

gconnoyer said:
View attachment 8555107

What magazine is this? It doesn't look like the original 6677

IsaacL · Dec 7, 2024

adisan77ro said:
What magazine is this? It doesn't look like the original 6677

https://grayopscnc.com/products/billet-aw-mag-the-a-dub

xxflyingturtlexx · Dec 7, 2024

gconnoyer · Dec 8, 2024

adisan77ro said:
What magazine is this? It doesn't look like the original 6677

Its a GrayOps CNC 12rd BR mag. I use the normal 6677 for my 6.5 barrel, but for the Dasher these Billet ones feed 200% better than the factory mags do with the 6.5 creed.

I cant wait until they start production in standard. They only have BR and GT at the moment.

gconnoyer · Dec 8, 2024

Huckmeat said:
I'm waiting on my AT-XC, and thinking about immediatly having the foreend dimpled for R-LOCK plates and then cut down before more ceracoat. For those of you who cut down the forend, how much did you cut off? I can't see wanting it much longer than I can reach from behind the gun for adjusting bipods in field matches; It will never be way out at the end the way I use a rifle.

I cut about 2" off. Basically just found a spot where I wouldnt have an open edge from a keyslot or bolt hole and cut it there.

adisan77ro · Dec 8, 2024

gconnoyer said:
Its a GrayOps CNC 12rd BR mag. I use the normal 6677 for my 6.5 barrel, but for the Dasher these Billet ones feed 200% better than the factory mags do with the 6.5 creed.

I cant wait until they start production in standard. They only have BR and GT at the moment.

I also need a 6 BR cal. barrel and a mag. as well. Do you know if Proof makes this caliber (carbon or steel)? I'm asking about Proof because I know a few importers here in Europe and it would be easier to purchase. Any recommendations are welcome, then I'll look for a way to get it in Europe.

Having trouble using the site?

Accuracy International AT-X

F. J. B.

Thumbnail-les

Rivet

Gunny Sergeant

Subject Matter Enthusiast

Constantly Learning

GunNut ¯\_(ツ)_/¯

Wheels

Gunny Sergeant

Gunny Sergeant

Private

Private

My Tangent Theta makes up for my cataract

Supporter

Mister Bevilaqua

Private

Private

Supporter

Supporter

Sergeant

Supporter

GOLDEN TICKET HOLDER

Supporter

Private

Mister Bevilaqua

Terminal Lance

World's Okayest Rancher and Hog Hunter

computer_carnivore

Terminal Lance

World's Okayest Rancher and Hog Hunter

Mister Bevilaqua

AI

GOLDEN TICKET HOLDER

Shooter

Mister Bevilaqua

computer_carnivore

F. J. B.

Mister Bevilaqua

Private

GOLDEN TICKET HOLDER

Mister Bevilaqua

Private

Gunny Sergeant

GOLDEN TICKET HOLDER

Private

computer_carnivore

Meme smuggler!

Terminal Lance

Terminal Lance

Private

Similar threads