Accuracy International AT-X

gconnoyer · Dec 8, 2024

adisan77ro said:
What magazine is this? It doesn't look like the original 6677

Its a GrayOps CNC 12rd BR mag. I use the normal 6677 for my 6.5 barrel, but for the Dasher these Billet ones feed 200% better than the factory mags do with the 6.5 creed.

I cant wait until they start production in standard. They only have BR and GT at the moment.

gconnoyer · Dec 8, 2024

Huckmeat said:
I'm waiting on my AT-XC, and thinking about immediatly having the foreend dimpled for R-LOCK plates and then cut down before more ceracoat. For those of you who cut down the forend, how much did you cut off? I can't see wanting it much longer than I can reach from behind the gun for adjusting bipods in field matches; It will never be way out at the end the way I use a rifle.

I cut about 2" off. Basically just found a spot where I wouldnt have an open edge from a keyslot or bolt hole and cut it there.

adisan77ro · Dec 8, 2024

gconnoyer said:
Its a GrayOps CNC 12rd BR mag. I use the normal 6677 for my 6.5 barrel, but for the Dasher these Billet ones feed 200% better than the factory mags do with the 6.5 creed.

I cant wait until they start production in standard. They only have BR and GT at the moment.

I also need a 6 BR cal. barrel and a mag. as well. Do you know if Proof makes this caliber (carbon or steel)? I'm asking about Proof because I know a few importers here in Europe and it would be easier to purchase. Any recommendations are welcome, then I'll look for a way to get it in Europe.

Part Timer · Dec 8, 2024

Someone jump in here if I'm way off base, but I don't see any of the BR calibers offered in the pre-fit sections, steel or CF, for AI - Link for reference.

You could always just order the 6mm blank and have it chambered somewhere?

adisan77ro · Dec 8, 2024

Yes, I think that would be an option too.

Tex68w · Dec 8, 2024

The only 6mm cal pre-fit Proof offers for the AI is in 6 Creedmoor but most any shop should be able to spin one up for you. I see 6GT barrels in M27x2.0 for sale in here from time to time.

clefairy · Dec 8, 2024

Tex68w · Dec 8, 2024

clefairy said:

Just watched it, good stuff.

hafejd30 · Dec 8, 2024

clefairy said:

Great video. Although I haven’t tested it because I use a torque wrench as well I wonder if he marked the quickloc screw with a sharpie then just matched that up with the hand tool if his consistency would match up with the fix it sticks torque

Maybe he did and I didn’t see that in the video

anon · Dec 8, 2024

Nothing like using a hacksaw to make the AI you want.

I'm of course still clinging to the hopium that I can someday purchase a short uppered AT-X(whatever) with a 16" or 16.5" barrel.

Or, even, just, the one single part for the short upper.

adisan77ro · Dec 8, 2024

The fix it sticks torque has an accuracy of +/- 6% (even 10% at high values)
So between 2 disassembly/reassembly of the barrel, a difference of up to 12% (or 20%) can result in the tightening torque

Tex68w · Dec 8, 2024

I think the MIL/LE version has a shorter forend.

gconnoyer · Dec 8, 2024

adisan77ro said:
I also need a 6 BR cal. barrel and a mag. as well. Do you know if Proof makes this caliber (carbon or steel)? I'm asking about Proof because I know a few importers here in Europe and it would be easier to purchase. Any recommendations are welcome, then I'll look for a way to get it in Europe.

I know Mile High Shooting has some (maybe in stock?) Surely dealing with AI to get guns into the US they are familiar-ish with the process?

Accuracy International AT-X/AX/AT Barrel: 6BR, 26" - 5/8x24, Black-Bartlein

0626082BL. Factory Accuracy International Barrel, chambered by Win Tactical. Bartlein Steel blank.

www.milehighshooting.com

gconnoyer · Dec 8, 2024

Part Timer said:
Someone jump in here if I'm way off base, but I don't see any of the BR calibers offered in the pre-fit sections, steel or CF, for AI - Link for reference.

You could always just order the 6mm blank and have it chambered somewhere?

Proof does not. Mile High has some but I just had Ryan @ Hunt's Long Range cut some for me.

gconnoyer · Dec 8, 2024

anon said:
Nothing like using a hacksaw to make the AI you want.

I'm of course still clinging to the hopium that I can someday purchase a short uppered AT-X(whatever) with a 16" or 16.5" barrel.

Or, even, just, the one single part for the short upper.

gotta do what you gotta do lol

They do offer it in the LE model, but I dont know if they'll let normal people buy them if you arent a BlueFalcon

gconnoyer · Dec 8, 2024

hafejd30 said:
Great video. Although I haven’t tested it because I use a torque wrench as well I wonder if he marked the quickloc screw with a sharpie then just matched that up with the hand tool if his consistency would match up with the fix it sticks torque

Maybe he did and I didn’t see that in the video

I just did the ol Badger method of finger tight and then 90* to test if I wasnt using the fix it sticks to torque. Works very consistently but the POI is differenet.

hafejd30 · Dec 8, 2024

gconnoyer said:
I just did the ol Badger method of finger tight and then 90* to test if I wasnt using the fix it sticks to torque. Works very consistently but the POI is differenet.

You tried what’s in the video or is that your video?

gconnoyer · Dec 8, 2024

hafejd30 said:
You tried what’s in the video or is that your video?

Yeah thats my video. I threw the video up of the test on paper in the outro part. Like 20ish min mark

hafejd30 · Dec 8, 2024

gconnoyer said:
Yeah thats my video. I threw the video up of the test on paper in the outro part. Like 20ish min mark

I watched it. Very well done!

I knew it was someone from the hide the moment you mentioned 6.5 vs 30 cal for deer

gconnoyer · Dec 8, 2024

hafejd30 said:
I watched it. Very well done!

I knew it was someone from the hide the moment you mentioned 6.5 vs 30 cal for deer

LMAO well we did a 6.5 vs 308 video showing my 16” setup vs my buddies 20 or 22” 308 and didnt hear the end of how bad a 6.5 is for deer where a 308 is the best thing ever.

hafejd30 · Dec 8, 2024

gconnoyer said:
LMAO well we did a 6.5 vs 308 video showing my 16” setup vs my buddies 20 or 22” 308 and didnt hear the end of how bad a 6.5 is for deer where a 308 is the best thing ever.

If you look back in the threads here you’ll see I’m a candidate for that argument in the 178 ELDX 30 cal camp

Although my furthest kill on a whitetail at 1121 yards is still at the hands of the 260. Which is another argument (6.5 vs 260) that I always participate in haha

Arbiter · Dec 10, 2024

gconnoyer said:
gotta do what you gotta do lol

They do offer it in the LE model, but I dont know if they'll let normal people buy them if you arent a BlueFalcon

Per MHSA the other day, the AT-XC LE model is for agency purchase only, OR purchase by individual officer if they have letterhead stating the rifle is for duty use.

So ultimately not *impossible* to buy, just highly difficult (I suppose you could offer to fund some random snipers to get a new rifle each year, in exchange for selling you their old LE lol). Per MHSA, it's a contractual issue, not a legal one.

Hacksaws are pretty cheap and easy in comparison.

Tex68w · Dec 10, 2024

It can be done, but yes, the juice isn’t worth the squeeze. In true Hide fashion, one will likely come available for sale here in the PX before too long lol.

Imw787 · Dec 10, 2024

Looking for a new bag rider, don’t love the ergonomics on the one from AI. Anyone have any experience with the riders from Dependabilt or Department of Techne?

Part Timer · Dec 10, 2024

Imw787 said:
Looking for a new bag rider, don’t love the ergonomics on the one from AI. Anyone have any experience with the riders from Dependabilt or Department of Techne?

The Dependabilt one is nice. The G-Tac bag rider that you can get at Sporting Services is also nice, comes with an ADM mount.

Tex68w · Dec 10, 2024

I like the looks of the one from Sokek as well.

hafejd30 · Dec 10, 2024

Tex68w said:
I like the looks of the one from Sokek as well.

If I still had mine this is what I’d put on it. The dependabilt one is nice and that’s what I had on it. Only thing I didn’t care for was the flat bottom. It didn’t nestle into a bag as well as something like the sokek would

The sokek also blends into the gun better and isn’t like a ski on the bottom sticking forward

Tex68w · Dec 10, 2024

hafejd30 said:
If I still had mine this is what I’d put on it. The dependabilt one is nice and that’s what I had on it. Only thing I didn’t care for was the flat bottom. It didn’t nestle into a bag as well as something like the sokek would

The sokek also blends into the gun better and isn’t like a ski on the bottom sticking forward

You are without an AI?

Criver600 · Dec 10, 2024

Imw787 said:
Looking for a new bag rider, don’t love the ergonomics on the one from AI. Anyone have any experience with the riders from Dependabilt or Department of Techne?

I've settled on MBE Ballistic Solutions bag rider, seemed like I was always trying to get extra height out of my Bugholes. Very versatile. Great set of sleds also.

hafejd30 · Dec 10, 2024

Tex68w said:
You are without an AI?

I’m without an ATX

I’m however with two thumbhole AT’s

farrar86 · Dec 10, 2024

@gconnoyer which gen do you have? I'm wanting to run an ATX or ATXC next season. Commented on that video asking the same...is the atxc worth is over the atx and improvement(s) to the action?

Tex68w · Dec 10, 2024

farrar86 said:
@gconnoyer which gen do you have? I'm wanting to run an ATX or ATXC next season. Commented on that video asking the same...is the atxc worth is over the atx and improvement(s) to the action?

I think it has been said quite a few times here that if you can get an AT-X for $4K or less with a few accessories then you’re better off going that route. Now if you don’t own one yet and you can snag an AT-XC for $6K or less then the juice is worth the squeeze IMHO and that’s the route I went. I don’t think that the XC is leaps and bounds better than the X but it’s an improvement and the supported action going forward.

gconnoyer · Thursday at 8:11 PM

farrar86 said:
@gconnoyer which gen do you have? I'm wanting to run an ATX or ATXC next season. Commented on that video asking the same...is the atxc worth is over the atx and improvement(s) to the action?

I dont think so. I really have ZERO issues with the bolt weight or action weight.
Its super slick once it breaks in.

The comp trigger is great.
The chassis is great, balances great.

Unless you want the folder and full bridge and rail, its the same gun effectively.
The bigger knob on the ATXC is nice, but you can literally order a knob from McMastercarr and replace it for $3 lol

mr_fullmetal · Friday at 2:53 PM

@Criver600 how long did that take to receive that bag rider by chance?

Criver600 · Friday at 4:07 PM

mr_fullmetal said:
@Criver600 how long did that take to receive that bag rider by chance?

Week, 10 days at the most. MBE very easy to do business with.

Tex68w · Sunday at 4:55 PM

Having trouble using the site?

Accuracy International AT-X

Terminal Lance

Terminal Lance

Private

Subject Matter Enthusiast

Private

Mister Bevilaqua

Sergeant of the Hide

Mister Bevilaqua

Supporter

Private

Private

Mister Bevilaqua

Terminal Lance

Terminal Lance

Terminal Lance

Terminal Lance

Supporter

Terminal Lance

Supporter

Terminal Lance

Supporter

Sergeant

Mister Bevilaqua

Private

Subject Matter Enthusiast

Mister Bevilaqua

Supporter

Mister Bevilaqua

Sergeant

Supporter

Private

Mister Bevilaqua

Terminal Lance

Private

Sergeant

Mister Bevilaqua

Similar threads