Taking a screenshot of the excel file works ok but whatever you had set up on the previous version for range card worked fine just go back to how you had range card set up on the previous version
New Applied Ballistics® Quantum™ APP! - & It's Free!
- Thread starter DocUSMCRetired
- Start date
I have a Garmin Descent MK 3 that I installed AB on. I was able to connect the old app to the watch and get the profiles synced over. The new app will not see the Garmin watch to add it. I can add the Foretrex 901, but not the watch.
I’ve removed the watch from Garmin connect, removed it from the iPhone, restarted everything, added the watch back to connect. AB still won’t see it as a device to add.
I see in the notes and screenshots that you have the Tactix added, so the Descent should be able to be added since I have AB installed on it. Is it just a matter of the app needing to be told that it can connect to a watch other than the tactix?
I’ve removed the watch from Garmin connect, removed it from the iPhone, restarted everything, added the watch back to connect. AB still won’t see it as a device to add.
I see in the notes and screenshots that you have the Tactix added, so the Descent should be able to be added since I have AB installed on it. Is it just a matter of the app needing to be told that it can connect to a watch other than the tactix?
The new app is a step in the right direction.
I have few issues though
Right now the app is behaving differently between my iPad and my iPhone
When i click the (export) icon on my iPad for my range card nothing happens , it works correctly on my iPhone
Another issue ,
The range card is only allowing increments of 5Y , why not allow 1Y increment like the previous version
I have few issues though
Right now the app is behaving differently between my iPad and my iPhone
When i click the (export) icon on my iPad for my range card nothing happens , it works correctly on my iPhone
Another issue ,
The range card is only allowing increments of 5Y , why not allow 1Y increment like the previous version
Attachments
When I use the CD model for
308 ELDM 225 the app won't save a DSF calibration. Also given the 1.5 mil change in trajectory I see @ elr ranges I wonder if it's accurate. I have it set very close using the G7 BC.
Hornady did change the bullet design a year after they released it.
308 ELDM 225 the app won't save a DSF calibration. Also given the 1.5 mil change in trajectory I see @ elr ranges I wonder if it's accurate. I have it set very close using the G7 BC.
Hornady did change the bullet design a year after they released it.
Please send a support ticket in on the device causing the issue so we can see the log.
Am I missing where I can input the altitude at which I zero’d?
What about adding inches of drop to the range card?
What about adding inches of drop to the range card?
You can set the range card to inches by changing your scope values.
That altitude you zero at doesn't matter.
Unless you are doing a zero that’s not 100 yds for some dumb reason
@DocUSMCRetired
Would there be a way to add an "Ammo Temp" field to the environmental in future versions? Potentially something that could be toggled off and ignored if not required.
Today I was shooting in temps around 0 and ammo had been in the cab. I got my dope squared away initially by editing my profile to ignore the temp table I had set up and then later as the ammo cooled I turned it back on as I started trending lower and lower. Being able to do something similar without having to edit the profile would be handy.
Would there be a way to add an "Ammo Temp" field to the environmental in future versions? Potentially something that could be toggled off and ignored if not required.
Today I was shooting in temps around 0 and ammo had been in the cab. I got my dope squared away initially by editing my profile to ignore the temp table I had set up and then later as the ammo cooled I turned it back on as I started trending lower and lower. Being able to do something similar without having to edit the profile would be handy.
Now that the Kestrel devices have been added, is there a timeline for integrating the Vectronix LRFs? 
Our priority at the moment is Kestrels, and any bugs that pop up from users. We want to hammer those out before we move onto something else.Now that the Kestrel devices have been added, is there a timeline for integrating the Vectronix LRFs?
Will the App have multiple target cards in order to separate sectors/stages with multiple targets on each? And will it sync these target cards/sectors with Kestrels? It would be nice to do everything from one app and not have to use the Kestrels Ballistic app. If it can do this already please guide me to info on how to do it.
I had to go in and manually click on update in my apps in order to get the update; now my Kestrel connects.
We are discussing it, but nothing on the table for implementation yet.
Check your settings page. Need to be on version 3.2 or newer.
I just downloaded the app, do you have to have the paid version, too save any rifle profile?
I change the standard one the it starts with, to all my information, and save, but it ewveets back to the basic 308 profile
I change the standard one the it starts with, to all my information, and save, but it ewveets back to the basic 308 profile
This should not be the case. You should get 5 for free. I would recommend making all new profiles and deleting that one if you don't need it.
I ended up uninstalling, and installed again, seems to be working now
I might be a pine cone. Android app now connects to my Kestrel 5700. I have the option to import profiles but I get stuck in the "importing" screen. Does it just take a long time, I quit waiting at 15 minutes. Or is it still in development?
Same here. Also I don't see any PIN prompt during the connection process as with the Kestrel app. Is this expected?
And ditto on the multiple target cards/ sectors/stages entry request, that would be great.
A fix for this is coming out tomorrow.
PIN should always be turned off when using with AB Quantum.
We are tracking requests, but our focus right now is on stability.
Full price, if you are grandfathered in. It is pro-rated for people who have bought an Elite subscription.
Would it be possible to get wind speed/direction and target inclination on the same page? I use these the most while hunting. Perhaps on the target page have the option to replace target speed with wind? Or on the environment page replace humidity with inclination?
Should be able to clear out the temp data, hit the ./- button on the keyboard (might need to push twice for negative function) and then input the number you want.
Only in the app, but also if its Elite then it will not unlock Professional. Currently only 2 devices unlock Pro on the App. Kestrel 5700X-WEZ and Leica Geovid AB+.
I noticed that the font sizes in the app on my iPhone 11 are smaller compared to those on an iPhone 13. Is there a way or a setting to increase the size?
iPhone has those settings in accessibility, but messing with them can cause issues with apps.
Similar threads
