Search results

Search the forum Search Articles
  1. D

    Gunsmithing Grayboe stock mods

    thanks you sir
  2. D

    Gunsmithing Grayboe stock mods

    that looks good, the adjustable cheek piece is probably my favorite thing i did to it, the kmw hardware is really nice
  3. D

    Range Report Hornady .30 155gr ELD-M vs 168gr ELD-M

    must be all in the barrel lol, mine is lapua brass, and my throat is a mile long, and I'm seating to 2.90 and nowhere near the lands still
  4. D

    Range Report .243 Remington

    my factory savage 1:9.25 shoots 105 vld hunters awesome, 1/2 moa out to at least 560, shot it at 700 on steel, didn't measure but it was a tight group
  5. D

    Range Report Hornady .30 155gr ELD-M vs 168gr ELD-M

    is that with varget? I get 2620 for 178 bthp with 44.8 varget from my 20" factory remington barrel
  6. D

    Gunsmithing Grayboe stock mods

    it was a rough finish, and on there good, so I just went right over it, I don't believe it will have any problems sticking
  7. D

    Gunsmithing Grayboe stock mods

    I didn't get any pictures of that, but just cut out the shapes, paint stock one color, place 5 or 6 stickers on, paint whole stock another color, 5 or 6 more stickers, paint whole stock another color, then peel off all the stickers, just a bunch of layers basically
  8. D

    Gunsmithing Grayboe stock mods

    it's actually dark brown instead of black, krylon camo, that was the first layer, then I believe dark green, light green, and tan last. the tan was krylon camo, dark green was aerovoe, and light green was rustoleum camo, then went over the whole thing with a krylon matte clear
  9. D

    Gunsmithing Grayboe stock mods

    thanks, that was my thoughts too, as long as you cut it reasonably close Devcon will hide the rest. I had originally planned on smoothing the bottom out by sanding, coating with Devcon, then sanding again, and then coating the top with Devcon and taping it up with wax paper in between for a...
  10. D

    Gunsmithing Grayboe stock mods

    Figured I would share my stock project, started out as a grayboe renegade, and I added everything I wanted, kmw loggerhead cheek hardware, Devcon texturing, flush cups, Devcon bedding, and a krylon gap camo job. it ended up turning out better than I had imagined, I did have to bed it twice, I...
  11. D

    Hornady LNL Progressive and 223-what powder?

    Re: Hornady LNL Progressive and 223-what powder? I use 2230, winchester small rifle primers, and a lee die set with the factory crimp die for .223. Never had a problem with the winchester primers in ar's. For the 9mm and 45, winchester 231 works good for both. Also Imperial sizing wax...
  12. D

    Primer interchange?????

    Re: Primer interchange????? Start at 36 and work your way up to 40 looking for pressure signs and accuracy, go up in .5 increments to 40, load 3 each of 36, 36.5, 37, 37.5, 38, 38.5, 39, 39.5, and 40. If you don't get signs of pressure start at 40 and work your way back in .3 increments until...
  13. D

    308 win load recipe for 20" barrel

    Re: 308 win load recipe for 20" barrel I use 45 grains of varget with a 175 smk in my 20" remington 308, with lapua brass and winchester large rifle primers, for right at 2600 fps, just enough to get to 1000 yards. I did a lot of research before working up loads and found most were using...
  14. D

    F T/R Competition MR/LR matches in Oak Ridge this weekend (3-10/11)

    Re: MR/LR matches in Oak Ridge this weekend (3-10/11) What time will it start in the morning, and how long is the match normally?
  15. D

    F T/R Competition Shot at 600 today for the first time

    Re: Shot at 600 today for the first time Hey, I've been thinking about becoming a member at oak ridge, I was just wondering if you can use the 1000 yard range anytime or only when they are having practice days?
  16. D

    Whats a clean powder for 45 and 9?

    Re: Whats a clean powder for 45 and 9? I use winchester 231 in both, have you tried loading a little hotter? Sometimes a light load will burn dirty. I use 5.7 grains under a 230 roundnose plated powerbond bullet, replicates factory loaded 230's at around 830 fps and shoots clean
  17. D

    M118 175 pulled bullets

    Re: M118 175 pulled bullets I actually saw this post about 3 weeks ago and ended up bidding on and winning that exact auction. I shoot 175 smk's out of my remington, but was looking for some bulk bullets cheap to load up for my 1919. I sent the guy paypal the night the auction was over, and...
  18. D

    Range Report 2nd time shooting at 1000 yards, several questions

    Re: 2nd time shooting at 1000 yards, several questions Thanks for the replies, I tried the non litz version in shooter and I'm still getting about .3 mils high at 500, not sure how to take care of that yet, but I am writing everything down and making my own data sheet as I go. I'm using a...
  19. D

    Range Report 2nd time shooting at 1000 yards, several questions

    About 6 months ago I decided to buy a target rifle, and had decided on an sps tactical after alot of reading. Instead I found a pretty good deal on what I think is a remington 700 police 20" with Hs Precision stock. It had a Millett 4-16x56 on it, and after reading up I bought some Lapua brass...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts