Search results

Search the forum Search Articles
  1. crowsniper1

    Rifle Scopes Scope leveling?...

    The best way i have found is to put a small bubble level on my scope rail and use a leupold boresighter with a small level on top of it and level my cross hair to the leupold boresighter,they mount up level every time.
  2. crowsniper1

    CZ 527 .223 Load Development. Need Help!

    I usually load them at 2.260 but i have had good results at 2.225 OAL with the 55 grainers with 25.5 varget ,LC brass . I have tried hotter loads and slower loads but 25.5 seems to be a sweet spot with varget.
  3. crowsniper1

    CZ 527 .223 Load Development. Need Help!

    25.5 varget works in every 223 i have tried it in. I use that load with 55 and 69 SMK and they all shoot great.
  4. crowsniper1

    Need opinion on a OCW load

    No marks at all on the base of my brass and the primers looked the same from low to high so im guessing pressure is ok,i really want to shoot over my chrony ,very curious about the velocity.
  5. crowsniper1

    Need opinion on a OCW load

    OCW test link to pic I shot some test loads yesterday to try out the OCW method and heres the results,tell me which load area you would go with. I shot these at 210 yards just to see how my gun liked them. Temperature was around 85 and mirage was pretty bad. I only loaded up two bullets for two...
  6. crowsniper1

    lets rate range finders by price

    I would look for a bushnell elite 1500 on ebay ,they sometimes go for $150-$175 with a camo case . I have owned several and they range out to 1400 yards when i tested them.
  7. crowsniper1

    Video or pictures of setting your .308 Dyes.

    Not very hard to do. Seater die = screw die in until brass touches die with the ram all the way up,then back die out 1/2 turn. Sizer die = screw die in untill die touches shellholder with ram all the way up,tighten die 1/4 turn . This will put you in the ballpark and you will need chamber...
  8. crowsniper1

    Loads for .204 Ruger

    I use 32 vmax with 27 grains of H-322 or benchmark,shoots good out to 450 yds.
  9. crowsniper1

    Remington 700 Tactical 16.5" 308 (85538)?

    I have the .223 tactical 20" and it shoots 80 grainers with RL-15 quite accurately. I assume its a 1/9 twist,have not checked it.
  10. crowsniper1

    Atlas Bipod

    Every now and then you can find a used atlas for around $175,they sell rather quickly for that price,i use harris ,blackhawk and atlas and they all work well.
  11. crowsniper1

    Rifle Scopes Vortex Pst ffp Leaking?

    Cant really say that i have,but im sure it's happened at least once
  12. crowsniper1

    Rifle Scopes Vortex Pst ffp Leaking?

    We hear that pretty often dont we..lol
  13. crowsniper1

    Gunsmithing 223 ammo & twist rate

    Heres results from today,hot as hell at on top of the mountain.
  14. crowsniper1

    Gunsmithing 223 ammo & twist rate

    I shot a few test rounds this evening and 23.5 varget/ 69 SMK / 2.275 OAL grouped good for me. The speer 70 grainers shot really good too ,i had three nice groups with different charge weights so i will have to load up more and see how they do at longer range,they grouped best with lower charge...
  15. crowsniper1

    Gunsmithing 223 ammo & twist rate

    I just bought a sps tactical 20" as well. I fired some factory ammo through it just to break it in and it shot great with remington 45 grainers. Tonight i loaded up some SMK 69 gr, nosler 80 gr and speer 70 grain all with varget in .5 increments from 22 to 25 grains. I hope like hell it shoots...
  16. crowsniper1

    This sucker Remington AAC-SD just won't shoot...

    I would try some remington liquid bore cleaner with the abrasive in it,just a few strokes will clean quite a bit. Be sure to clean it all out really good though.
  17. crowsniper1

    OCW help and the next step

    That looks like a pretty hot load of varget,its gonna be hard on you brass. 45.6 - 45.9 looks sweet.
  18. crowsniper1

    Rifle stock pack

    I think mine is a voodoo tactical,only cost about $15 but it works for me.
  19. crowsniper1

    Anyone here ride 4 wheelers? Lets see your quads

    I have a 2012 500 foreman with 26" bighorns ,just turned over 700 miles,i love it.
  20. crowsniper1

    Your thoughts on the Bushnell Elite 3200 10x mil/mil for a .22lr?

    I have owned a few of the 10x bushnell and never was really satisfied with them. I have a SWFA 6x on my savage tactical trainer and could not be happier.
Top Bottom
Back
Home
Forums
Merch
Alerts