I shoot AR Comp with 77 smk's in a CLE 16" upper. I did a little load development with 2000MR and 77's to see if I could get better accuracy and velocity. In my rifle while AR Comp seemed to be dirtier compared to 2000MR, it shoots better and seems to be temperature stable so I live with the...
I want a 16.5" .223 bolt gun to shoot with a suppressor. I would use this rifle for range shooting steel and a little hunting. I know I would likely have to use 69 grain bullets. I would like for it to have the potential for MOA accuracy out to 5-600 yards. I have it down to 2 choices. Option #1...
.260 123 Nos & 2000MR
I was able to shoot an OCW test with my new rifle today with 2000MR. The first 2 loads were used to break in and sight in. I think my next test will be 40.2-41.2 in .2 increments.
Remington 700 SPS-.260-24" factory barrel
XLR Element
2000MR
123 Nosler CC
Wolf LR...
I recently developed a load for my rifle (specs below) using 2000 MR. I built a profile for the load and rifle in the Shooter app. On an 85 degree day I zeroed at 100 yards and chronoed at 10 feet at 2620 fps. I wanted to calibrate the profile so I set a target at 300 yards. The app recommended...
I tried FL and wanted it to work. The instructions make it sound like a Smart Lube. During application "When the surface is warmed, the rate of FrogLube absorption is increased" but when you are shooting FL knows it is supposed to "wick(s) to the surface when warmed"
I had issues in cold...
Trevor, I have a 223 that I have zeroed at 300. When I tried to calibrate at varying distances it would not work for distances less than my zero, which require a hold under. I suspect there is a good reason for that but I do not know what it is.
I'm using Shooter on the Iphone. I can enter a negative number but it does not calibrate. It seems to not calibrate at distances less than your zero. I changed my zero in the app so I could enter a positive number to calibrate then changed it back.