action

  1. Mag 300

    Gunsmithing Badger action same as AWM???????????

    I have heard that the badger action is the same as the AWM action Could this be true they look a lot alike?? Thanks Bill
  2. USMCj

    Problem with Surgeon Round action bolt timing?

    <object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/CjpWYmLpZA0"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/CjpWYmLpZA0" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350">...
  3. Cartman

    CDNN SPR Action - DBM or floorplate?

    May or may not eventually add CDI bottom metal. Will be going on McMillan stock. Any considerations why you may or may not want to go one way or the other?
  4. M

    AI chassis and Stiller or Lawton action

    Does anyone know if the Lawton 7500s or Stiller tac-30 actions fit right into the AI chassis without modification?any help would be appreciated,thanks.
  5. R

    long action what to do?

    I would like to take a mid to long range class in next year and was think about Thunder Ranch because it is close and sounded good. They say no magnum calibers so the 300win. is out and I don't have anything else but a Remington 700 ADL in 270 should I sell it and get a 308 or get the 270...
  6. TDR911

    22lr action for Remington 700 AICS stock

    Are there any companies making a 22LR action that will fit a Remington 700 format other than a Remington 40X. I have a short action AICS chassis and would like to build a trainer rifle. Stillers 25 X to be released soon.
  7. KNIGHT11B4

    Question About GAP Templar Action???

    Gents- Have a new GAP coming my way very shortly with a Templar action. Wondering if that Templar action will accept a rail extension. The rail extension simply goes over the standard moa base on an M24 and extends the rail over the sides and down the barrel allowing the use of items such as a...
  8. C

    Pic request: FDE barreled action in black stock

    Thinking about taking the krylon to my SPS Tactical but I don't really want to paint the hogue rubber stock (doubt the paint would stick well to rubber). Was wondering if anyone out there has a FDE/sand colored barrel/action sitting in a black stock? Would love to see a pic of that combo...
  9. S

    Gunsmithing Barrel to Action Threading Question

    I just read the Vaughn book about his accuracy experiments where he identified barrel/action thread movement as a source of inaccuracy and the proposed a different type of threading to improve the lockup and make more threads actually engage and provide support. Are there any practical...
    • scotharr
    • Thread
    • action barrel question threading
    • Replies: 22
    • Forum: The Armory
  10. B

    Range Report AICS 2.0 AND LAWTON 8000 L ACTION

    will the AICS 2.0 work with a lawton 8000 L action chambered in 338 snipetac?
  11. Furner

    Gunsmithing How to tell if my action needs bedding?

    I searched and didnt come up with anything useful. I just got a B&C stock, and to see how much contact I had with the forward bedding area, I put a little grease on the bedding block. Screwed on the action and then took it back off. It looks like I am only getting contact with the bedding...
  12. P

    Rifle Scopes Scope rails for bolt action .308s

    Hello all, I apologize if this was asked already... Pretty sure it has but can't find it using search function. For a .308 bolt gun, is there a need for steel scope rails or is 7075 aluminum rails sufficient enough strength wise for a range/bench gun? Thanks.
  13. mjh30

    Gunsmithing Remington 700 Action Difference

    Is there a slight difference in the Remington 700 rifle actions prior to B prefix. I was going to get a Badger Ordinance mount and rings (USMC M40 copy) but it stated not to use with A prefix or older rifles. Since my rifle is five digit, I didn't think it would work, I have several older...
    • mjh30
    • Thread
    • 700 action difference remington
    • Replies: 3
    • Forum: The Armory
  14. I

    Montana LR Event, (After Action Report).

    To all that attended I want to say THANK YOU for all your help, support and friendship. I had a great time and realy learned a lot from you all and look forward to shooting with you again. It was worth every minute of the 18 hour round trip drive!!! I also learned what areas I need to work on...
  15. slayer_21420

    Gunsmithing Good action blueprinting/barreling video??

    Any suggestions on a good informative video that covers setup work? Thanks, Steve
  16. M

    First Custom Action - Phoenix Machine

    It's amazing how long it seems when you're waiting for something new, and this has been no exception. Now that it's here it's waiting to be completed which will unfortunately have to be piecemeal, but it's a start! Ultimately it's going to be a .308, with a Bartlein barrel, in either a manners...
  17. SmokeRolls

    Which FN action is more preferred?

    Between the FN "PBR" and the "SPR", which action is preferred? Both are based on the Mauser action but is there a difference in these versions? Are the triggers better on one or the other or the same? Thanks guys...SmokeRolls
  18. J

    GAP 7000 Action

    I've got a Crusader clone built on a GAP 7000 action. Does the 7000 have the same footprint as a Rem 700 ? My rifle is in a M40A1 stock and I'm looking to trade for or purchase an A5 , thus my question. Thanks guys, Ken
  19. D

    Pre-64 Win 70 Action In McMillan HTG Stock

    Does anyone know if the pre-64 Win Model 70 action will fit and could be ordered in the McMillan HTG stock? I'm curious if anyone has done it. I'm looking to build a rifle based on an action that I have. I would use a barrel contour similar to the Rem varmint contour. Any other suggestions...
  20. J

    Gunsmithing Trued 700 action VS Custom

    Once a 700 action is properly trued/ blueprinted by a competent gunsmith, is there a discernable difference downrange when compared to a Custom action? Jack
Top Bottom
Back
Home
Forums
Merch
Alerts