aics

  1. S

    Stiller Predator in an AICS stock

    I was wondering how many of you guys have a stiller predator or tac action in an AICS stock. I am thinking about putting my new Beanland custom rifles 6x47L in one. Jon says the bolt area might need relieved a bit. I would assume the 6x47L feeds ok from mags?? I had to sell my 6.5 creedmoore so...
  2. GunjunkieM24

    Lets see your rifles in AICS stocks.......

    Looking to build a new rifle in the AICS 2.0 stock. Having a hard time deciding which color. I would also like to see some close ups around the fit around the action area... I am going to be building a Magnum long action and I worry that the folder area is going to be painful on the nose....Any...
  3. rc2125

    Gunsmithing Stiller Predator SA & AICS

    Does anyone here have/run a rifle that consists of a stiller predator action(sa) mounted in an AICS? Wondering if that combo should in fact work and feed well, using an AICS & AI magazine (Mine will be .243win). I'm in "you gotta be kidding me mode" at the moment. I got this new action...
  4. P

    New Member Seeks AICS Skins!

    Hello everyone, First I'll introduce myself. I'm 46, live in North East Victoria in Australia and work 4000 kilometres from there in the Mining Construction Industry. I am a fitter and machiner by trade (what I'm doing now) and have a varied work history including 6 years of Military service and...
  5. Adventurer_96

    Gunsmithing AICS 1.5 plus .223? Worth it?

    I've got a R700 in .223 that I got from a relative. He had a fair amount of work done to it previously, and it sits in a varminter stock. I'm not a big fan of them, but I was thinking of throwing it into an AICS 1.5. Would it be a waste of time? Should I just go for a .308/6.5 Creedmore/...
  6. long range fire

    Where to buy AICS 308 (Rem700) magazines?

    Just wondering where I go to buy some magazines. Does AI sell the magazines directly? And are there aftermarket mags for AICS, or are they crappy?
  7. André

    Weight of your AICS outfit ?

    Having bolted on most available accessories on my AICS Rem 700 in .308 Win, I found it got heavy. Then I weighted it and the scale read 15.9 lbs How much weights yours ?
  8. JoeSmith

    AI(CS) for Sako Quad?

    Anyone make an AI type stock for the Sako Quad?
  9. Smokin

    If you're missing screws for your AICS skins....

    McMaster Carr PN 91290A136. Pack of 25 screws for $5.81.
  10. Y

    AICS set up for 20 MOA?

    Picked up a AICS for my rem 308 Saturday and ran into a little problem. I have a 2 piece mark 4 for a base and leupold mark 4 6x20x50 optic. The eyepiece is just to low. I moved the cheekrest laterally and all the way down. I am assuming I need more moa on base or????
  11. sobrbiker883

    Gunsmithing AICS mag/Badger M5 issue

    In the past two matches I've shot I have had a malfuntion with my AICS 10rd mags. Twice when I've inserted a mag the nose of my bullet on the first round has gotten caught under the front of the receiver's mag opening. I don't load to a long OAL and haven't remived the front reinforcing metal...
  12. long range fire

    Photos Remington 700P .308 in AICS with Nikon Tactical

    This is Remington 700P .308 with LTR fluted 26" barrel, in AICS 1.0 black stock, Nikon Tactical 2.5-10x44 scope, and Harris lightweight bipod.
  13. M

    AICS 2.0 Question

    Will the AICS fold to the right side? Or does it only fold to the left? TIA
  14. 11B-B4

    Gunsmithing MCM A5 or AICS 2.0... trying to decide please Help

    Im thinking of an A-5 GAP camo with all the bells and whistles... But im curious on cost. Out the door it almost looks like the AICS is cheaper when everything is said and done... AICS 2.0 $1000 From what i have heard you can drop them in and they dont need to be bedded although some...
  15. orkan

    Got my AICS 2.0 today!

    Nice stock! I thought it would come with a naked woman or something, considering what it cost! Mine showed up today from Mile High and I was quick to slap my rem700 SPS 308 in there. Before: After:
  16. T

    AICS stocks

    Where's the best place to get these??? Thanks, TM
  17. stillbuster

    Gunsmithing AICS recoil lug opening dimensions?

    What are the factory dimensions for the recoil lug opening on an AICS for a Rem 700 SA? My search fu is very lacking this a.m.
  18. superde

    Weight of AICS sa?

    Anyone know off hand what they weigh?
  19. C

    Gunsmithing Diameters of the Badger M5/ AICS Magchamber

    Hi, i`ve got a Rem700P.308McMillanA5. I want to build a bottom metall for the AICS mag. .....need the diameters of the Magchamber? (where the mag fits in- I´m german, my american isn`t very good) .....need the distance of the rear screwhole to the chamber. .....need the depth where the mag...
    • Carsten
    • Thread
    • aics badger diameters m5 or magchamber
    • Replies: 4
    • Forum: The Armory
  20. D

    Very quick question for the AICS owners here....

    How long is your rifle (with your particular barrel)? Due to its kit nature, I'm having a few dramas finding its dimensions once it’s all together. I'm just after the extreme dimensions so I can start looking for a hard case while I await the various ordered parts to arrive. Thanks all.
Top Bottom
Back
Home
Forums
Merch
Alerts