aics

  1. J

    AICS 1.5 VS Mcmillan A5 adj.

    Is there a difference in accuracy between a custom build being done on an AICS vs. an A5? Or is the difference ergonomics and end user preference? Thanks, Jack
  2. S

    Mcmillan A5 with a AICS bottom metal??

    What are the thoughts of the AICS bottom metal on a Mcmillan A5? Thanks Lee
  3. mik3

    AICS stock and Remington saftey won't fit

    Well I just got my AICS stock from a member here (Thank you!). The problem is that when I drop my 5R in the safety is engaged and thus I can not pull the trigger. Is there a fix for this? I'm assuming I can fix this by taking a dremel to the inside. Thanks, Mike
  4. J

    AICS photo ?

    I played around on the search and on google images for about 2 hours but I am not great with computers. I am tossing around the idea of a build and I was wondering if anybody had a photo of a black AICS stocked remington with a green color coated barreled action? I have a feeling someone will...
  5. mildot326

    Stiller Action in a AICS stock?

    Any troops done it? Pics would be nice? Even better if its a "lefty"
  6. 4

    aics remington700

    Has anyone used a remington 700 long action and AICS stock for 6.5 X 55 swedish mauser or 30-06 calliber.How do you get it to fead propperly if i hawe 300 win mag magazines?
  7. J

    Rifle Scopes Ring Height for AICS

    Okay so this has probably been covered before but I don't have the time to find it because I am going to order it soon. What ring height do each of you people with the AICS 1.5 or 2.0 have for a scope lense objective of 50mm? I am going to build an AICS 1.5 and a Remington 700 varmint and...
  8. H

    Inletting an AICS for the CG Jackson trigger....

    The Badger LA receiver is on the way, the AICS is set up for it/machined out by Badger. Anyone have a template or guide for fitting a CG Jackson trigger into this set up? thanks!
  9. TACTICAL45

    Gunsmithing AICS torques

    I seem to have misplaced my sheet that came with my 2.0. So, I need the torque specs. for it. Thanks.
  10. R

    Gunsmithing Inletting AICS lug area for .3 tubb lug

    Who can Inlet an AICS stock for a .3 lug? In a reasonable turn around time. Is there a good way to do this in a home shop without a mill? AHA Rad
    • radmcg
    • Thread
    • aics area inletting lug tubb
    • Replies: 14
    • Forum: The Armory
  11. T

    243 ackley in aics mags?

    I am currently about to do a 243 ackley build and am wondering if the 243 ackley loaded with heavy bullets 100grs and up will fit in the aics mags? thanks scott
  12. M

    Gunsmithing 1.450" Action in AICS?

    Was thinking about building a 338 Lapua in AICS using a Lawton 8500 action. Problem is, the diameter of the action is larger than Remington and I'm not sure it would work. Anyone done this before? Other acceptable actions for 338 Lapua that will fit an AICS?
  13. 4

    aics an surgeon xl action

    has any one used the surgeon xl action and aisc stock?
  14. JRose

    Love my AICS!

    Finally picked up an AICS for my Remmy, and man I LOVE IT! Fits me so much better than my old B&C. It is a little heavier, but fugg it, it's worth it. Only problem is, that even with the cheek piece all the way down, it's still a bit to high. Has anybody planed off the bottom of the bottom of...
  15. R

    Gunsmithing Stiller TAC 30 in an AICS

    Will the Tac 30 drop in an AICS or is there relief work to be done ie the bolt release? Does it matter if you have straight bolt handle or angled or will either work? AHA Rad
  16. SmokeRolls

    School me on AICS stocks

    I see people mention "1.5" and "2.0" AICS stocks and then i see some folders with the same # "1.5" or "2.0" designation and I just haven't had someone explain what this means.. Also when somebody says skins I'm asuming that you can buy a particular frame and change the "skins" around for color...
  17. A

    AICS + REM 700 PSS = Feeding problems from the mag

    Hello, I have and AICS 1.5 on a remington 700 PSS. However, testing it out I noticed that feeding from the magazine results in my bullets being scraped along the feeding ramp and i have to apply a generous amount of force to get it up the ramp. Manually loading the chamber is no problem with...
  18. D

    Jewell Trigger W/Bottom Safety in an AICS?

    Has anyone used a Jewell HVR with the bottom safety setup in an AICS? Did you prefer it over the top safety? I can see some situations where a bottom safety setup would be easier to manipulate (I have small hands). Dean
  19. syme71

    Gunsmithing AICS Barrel Contour

    Does anyone know what barrel contour would best fit an AICS chassis? It would be for a .308. Thanks.
  20. Victor Co Heather

    Gunsmithing Bedding an AICS... (pics) UPDATED

    Last year I had my AICS converted to a left handed action by Cactus Tactical and they did a great job. I dropped in a trued LH Remy 700 action with a Montana Rifleman bbl and it shoots pretty well. The one thing I've wondered about is bedding the action. Has anyone here bedded an AICS? If so can...
Top Bottom
Back
Home
Forums
Merch
Alerts