130 and 140 grn berger hybrid LOAD info ?

[scorpio 25]

Does anyone have a copy somewhere using H4350 with these 2 bullets. got the lyman book great book but doesnt have these should have did my homework

 

[impactaddict]

there's about 70 pages of data here.

6.5 Creedmoor

I'm in the process of building my 6.5 Creedmoor and I have a few boxes of their 120gr AMAX factory loads, but once those are gone it to the table. I've seen a few loads on here, but they are spread out all over the place. Figured we need a spot for all of them to go. Bullets I'm interested in...

www.snipershide.com

 

[XTREM HTR16]

Can’t go wrong with either bullet in the creedmoor IMO

 

[BuildingConceptsllc]

I've got some very good load info for the 130gr Berger otm. It's my preferred bullet for 6.5cm by far. I will post it for you in a bit so you don't have to go through that whole thread.

What rifle are you shooting it out of and what brass?

 

[BuildingConceptsllc]

Does anyone have a copy somewhere using H4350 with these 2 bullets. got the lyman book great book but doesnt have these should have did my homework

You want the load info? Need to know the brass you're using though. I have a few that I've tested. No biggie if not

 

[Downtown]

I've got load data for that bullet and powder in .260 Remington, should that be what you're looking for. You didn't specify the caliber. That is such a standard combination, there are a number of well proven loads.

 

[BuildingConceptsllc]

I've got load data for that bullet and powder in .260 Remington, should that be what you're looking for. You didn't specify the caliber. That is such a standard combination, there are a number of well proven loads.

I assumed he was talking about 6.5cm

 

[Downtown]

That would be my first thought also, as it's the more popular round, but that is a great and well known combination for the .260.

 

[scorpio 25]

I've got some very good load info for the 130gr Berger otm. It's my preferred bullet for 6.5cm by far. I will post it for you in a bit so you don't have to go through that whole thread.

What rifle are you shooting it out of and what brass?

Hornay brass/ JHR

 

[scorpio 25]

I assumed he was talking about 6.5cm

yes

I've got load data for that bullet and powder in .260 Remington, should that be what you're looking for. You didn't specify the caliber. That is such a standard combination, there are a number of well proven loads.

6.5 cm

 

[Garvey]

140's, start at 41.4 gr and climb up in .3's

130's, start at 42.4 gr and climb up in .3's

 

[spife7980]

^^ don’t start at max loads.

 

[Doom]

You can email Berger and they will likely get you the data you seek.

 

[scorpio 25]

^^ don’t start at max loads.

140's, start at 41.4 gr and climb up in .3's

130's, start at 42.4 gr and climb up in .3's

thank you