7mm-08

#101
The 7mm-08 was the cartridge for steel competitions for knocking down steel rams at a distance, it had the speed and the energy for getting the job done. It fell to the way side when the 6.5s took over the scene. My wife hunts with one, I originally got her a Browning BLR but she did not like the lever action and wanted a bolt so the BLR became mine. So I got her a Remington 700 ADL and then converted it to a BDL from extra parts I had from builds and dropped it in a better synthetic stock. She loves it, light in weight, compact and no issues with knocking and elk down.

 
#102
My late father built this 7-08 as his comp rifle and also hunted South Africa with it, taking 50+ animals with 162 amax on cull hunt.
139 super performance is good also
This is a 22" gain twist 9.2-8.5, GA Precision Templar, manners t5
 
Last edited:
#106
Gotta love a 7-08 for a hunting rig... My son loves his !

IMG_05613.jpg


internet_pic_3.JPG
 
#108
2 I built so far
7mm08 1-10 twist
I decided to go with 19.5 inch barrel for starters on this one, I just dropped a 11 degree crown on it, now I have to figure out when I can shoot it


builds are mostly done, only thing left is duracoat and thread the barrel for flash hider.
scopes are Viper PST top 2 and bottom is PFI 2-600
 
#110
Need a little advice/opinions on a setup I am considering for AZ stalking/long range mule/white tail/javelina. I am considering doing a Tikka T3 Lite Stainless 7mm-08 rifle with a Zeiss Conquest 3x12-56. Any thoughts or concerns?
 
#111
I finished my 7mm-08 AI and successfully hunted with it this season. Chambering was done by Bugholes here on the hide. Spec:

Stiller Predator SA w/20 MOA picatinny rail
Rock Creek SS 5R barrel (23 inches, 8.7 twist, fluted & threaded)
B & C Alaskan II (bedded, Wyatt extended mag box & Remington bottom metal)
Old Remington trigger tuned to 2.5 lbs.
Leupold 3-9x40 VX-R Patrol w/TMR

My pet load is 49 grains of CFE-223, BR2 primer and Nosler 120 grain BT. Average MV is 3223 FPS. This combo is absolutely devastating on Wisconsin whitetail. Accuracy is superb - better than .5 MOA at 100 yards. I found CFE-223 to be a great powder! It's not overly temp sensitive, unless you let a round cook in a hot chamber. I'm also very impressed with terminal performance of Nosler's 120gr BT.

Lastly, this rifle consistently shoots Winchester 140gr PP factory loads under MOA.
 
Last edited:
#113
6.5BR said:
What contour? Sounds nice, pics if you want. What is your COL? Thanks.
Click to expand...

You can go to the Rock Creek website for actual dimensions. Their #4 sporter is sometimes called a heavy sport barrel. I don't like skinny barrels!

COL is 2.820 inches. I'll post pictures soon. I subscribe to this thread, because I'm interested in this caliber.
 
#115
billyward1987 said:
Need a little advice/opinions on a setup I am considering for AZ stalking/long range mule/white tail/javelina. I am considering doing a Tikka T3 Lite Stainless 7mm-08 rifle with a Zeiss Conquest 3x12-56. Any thoughts or concerns?
Click to expand...

3-12 power is nice, but a 56mm objective is really big -IMHO. I picked up my lightly use VX-R Patrol here on the hide for a great price. My intent was to eventually put it on one of my hunting 5.56 AR's. When it arrived, I was really impressed by its light weight (16 oz. on my scale) and clear optics. However, I wasn't sure about the TMR reticle for hunting. Well that all changed when I took a running buck standing offhand @207 yards. Scope was dialed in at 5x and it was a snap shot. POA/POI was where the bucks neck and chest met. The VX-R Patrol is staying on this rifle for the foreseeable future - it just plain works well on this rifle. Oh, I have other high end scopes with more magnification and features, but they're heavy and bulkier.

FWIW - the Nosler 120gr BT didn't exit. The buck instantly collapsed as if it was head shot. The heart was in little pieces and lungs were jellied. I was really shocked and impressed with its performance.
 
#119
Never a bad thing when you are carrying a 7MM-08, in fact its a good idea to have several - just in case:) Here is my latest, started as a generic SPS stainless, sent to Karl @ Kampfeld Customs for some "improvements". Shoots most everything well, balances perfect, add the Montana sling and you're in high cotton!!

 
#123
Hello everyone, I'm new to the hide and I am also in the middle of a 7mm-08 build. I was looking at various post on 7mm-08 vs. 7mm-08AI and stumbled across this thread.

Bottom line, I've decided to stick with 7mm-08. I've had this caliber in three different rifles so far, a Rem 700 Mtn LSS, a Rem 7600, and a Browning BAR ShortTrac Oil Finish. I do my own reloading and have taken a lot of deer and hogs with this caliber. I started out with the Mtn LSS but later converted it to a 243 youth version for my 12 year old son and bought me the 7600. I later traded the 7600 for the ShortTrac. All the 7mm-08's were sub-moa shooters using my reloads. Well.... my son hasn't used the 243 as much as I thought he would, and I'm tired of chasing brass at the range with the BAR so I decided to use the Rem 700 action as a donor and do a custom build 7mm-08.

I've got a Bartlein 1-9 twist #3 contour heavy sporter stainless barrel that will be mounted in a Boyd’s laminated Prairie Hunger stock and will be switching out the Rem stock trigger for a Kepplinger single set. It will be glass bedded and free-floated. Mark Phar of Tumbleweeds Rifles (Tumbleweeds Thousand Yard F-Class, Rimfire and High Power Silhouette, and High-Grade Hunting Rifles) in Round Rock, Texas will be putting it all together for me starting next Monday. (He's at the shot show this week).

Still haven't decided on barrel length. It's primarily going to be a hunting rifle so want to keep it 24" or less. Here in Texas we primarilly hunt from raised blinds so, to some degree, barrel length and weight are not a major concern. Any comments, suggestions, recommendations on barrel length?

Any other "build" considerations I should keep in mind?

Thanks
firstshot
 
#127
If a man wanted to get a barrel for an AI AX to get the most as far as distance and ballistics from the 7-08 shooting the heavier bullets like the 162 AMAX, which would be the best barrel make, twist, and length to get? I have hunted with the 7-08 for years and IMHO it is one of the best deer rounds available. I shot a ton of deer with mine and not one single deer ever took a step after being hit with a Hornady SST.
 
#129
Hootiewho said:
If a man wanted to get a barrel for an AI AX to get the most as far as distance and ballistics from the 7-08 shooting the heavier bullets like the 162 AMAX, which would be the best barrel make, twist, and length to get? I have hunted with the 7-08 for years and IMHO it is one of the best deer rounds available. I shot a ton of deer with mine and not one single deer ever took a step after being hit with a Hornady SST.
Click to expand...

If you don't have any intentions of going over the 168 gr class bullets then 1:9 twist will suffice.
 
#133
here is my distance shooter .. in 7mm-08

IMG_7437_zps1860b66d.jpg


still using a hunting scope till I can get the funds for a Nightforce 2.5-10x 42mm Scope,

some mods but cut factory varmint barrel for now ..

but my hunting guns are savage 99's ( I love 99's :)

7mm-08-99_zps37c890e5.jpg

and it's a meat provider :)
mebambisolderbrother.jpg

and a new one built for me by the wife ... the top one .. also a 99F rebarreled into 7mm-08
IMG_20131205_025012_674_zps700133ed.jpg


yep I love my 99's and 7mm-08 ..
 
#142
Anyone ever put a 16" barrel on an AR10, like the DPMS LR308? And at that length of barrel, would there be any advante over the 7mm-08 over the .243? Back in Nebraska where I am from, there are a lot of white tail and mule deer shot with a regular bolt action .243 rifle every year. Pluse they use them on prairie dogs and other varmints as well. Ammo is pretty plentiful for the .243, so wondering how well it is for the 7mm-08 caliber?
 
#143
7mm-08

I went with 708 cause it's not that popular. Here is Aus anyway.
I liked the idea of trying to work it all out myself without a great wealth of info available. Although in reality there us still plenty of info available in this day and age.


Edit- my tikka heavy barrel doesn't like ar2209 with anything.

39.5 of 2208 (varget?) with 168 smk is the only combo I've found to work.
 
Last edited:
#144
chopiesel said:
I went with 708 cause it's not that popular. Here is Aus anyway.
I liked the idea of trying to work it all out myself without a great wealth of info available. Although in reality there us still plenty of info available in this day and age.


Edit- my tikka heavy barrel doesn't like ar2209 with anything.

39.5 of 2208 (varget?) with 168 smk is the only combo I've found to work.
Click to expand...
I've just switched over to the 168gr matchking and have to say I like them a good bit. The bc is not as good as the 162gr Amax but it's a good bit higher than advertised too also not as oal sensitive in my rifle.
 
#148
7mm-08

Nortex said:
I've just switched over to the 168gr matchking and have to say I like them a good bit. The bc is not as good as the 162gr Amax but it's a good bit higher than advertised too also not as oal sensitive in my rifle.
Click to expand...

I've not been able to find any amax in aus. Hopefully they start coming back soon as I'd love to try them. I did find 1 box of 162 hpbt and found them to work well, I've not shot it over 500 metres yet though.

Here is mine with her new w3

jenyguta.jpg
 
You must log in or register to reply here.

Similar threads

Schmo
Reloading Equipment Nosler 7mm-08 Brass
Replies
8
Views
213
Schmo
Schmo
806guns
Anyone still shooting 7mm 08?
Replies
59
Views
2K
SonoranPrecision
SonoranPrecision
E
TAC powder in 7mm-08
Replies
5
Views
435
ekaphoto
E
CANESFAN
New Build advice
Replies
39
Views
585
CANESFAN
CANESFAN
U
7mm Rem Mag vs. 30-06 recoil
Replies
9
Views
618
KYAggie
KYAggie
Top Bottom
Back
Home
Forums
Merch
Alerts