AB Quantum Major Update 3.3 + Calypso AB Mini

[DocUSMCRetired]

AB Quantum 3.3 Major Update:

1. Added new devices AB Quantum can pair to:
   • Calypso AB Mini.
   • Tango Fire 4000.
   • All Devices Previously Supported by the AB Synapse – SORD App
   • All Devices Previsouly Supported by the AB Synapse – BOSS App
2. New Remote View for compatible devices.
3. Improvements to navigation bar.
4. Full Calypso AB Mini Support
   • Pair with the device
   • Update the device firmware
   • Manage the pairing between the device and laser rangefinders
   • Added more devices the Calypso AB Mini can pair to:
     • Sig KILO8K, KILO10K devices (firmware update required – April 15th)
     • Envision MARS Units.
     • Wilcox RAPTAR Xe & MRF Xe devices.
     • SORD compatible devices.
     • BOSS compatible devices
     • Leica Geovid (firmware update required – April 15th)
   • Note: The Kestrel 5700 AB devices can now pair with the Calypso and receive live wind speed and wind direction updates in the Kestrel. This is an independent function, not through AB Quantum. Requires Calypso FW version 1.22 and above.

iOS version available immediately, Android available as soon as Google approves it (24 - 72 hours).

How to Navigate AB Quantum 3.3:


AB Quantum 3.3 Overview:


Using Calypso AB Mini with AB Quantum:

 

[NiteQwill]

Good to hear. Probably not going to buy another Calypso until more support is seen from the company.

 

[DocUSMCRetired]

Good to hear. Probably not going to buy another Calypso until more support is seen from the company.

We have taken over the support on the firmware side entirely now. We fixed a ton of issues.

 

[one shot ST]

My Calypso works great with Vector X, I don’t see any mention for Vector X, if I will do the firmware upgrade can I loose the capability to connect Vector X and Calypso ?

 

[Rodney65]

Neat! I was hoping for a few small changes for the Fire 4000 app, specifically the option toggle aerodynamic jump, so this is great.

 

[jNCgUN]

My Calypso works great with Vector X, I don’t see any mention for Vector X, if I will do the firmware upgrade can I loose the capability to connect Vector X and Calypso ?

I just upgraded my brand-new Clypso and can now stream wind data to ABQ—very cool! However, I can’t connect it to the Vector X. Since this is a fresh unit, I’m not sure if it was able to connect to the binos before the upgrade.
I’m good with this setup since my goal is to use ABQ as the central hub for calculations, with everything else as peripherals

 

[Btar21]

I'm not sure I have ever been quite so challenged by a piece of equipment. I did the update, connected to the device, and connected to my Kilo10k Gen2 via the app, but to the best of my knowledge, the dope in my Kilo does not reflect the wind reading from the Calypso.

Is there a secret to getting it to feed the Kilo? Does it have to be used in conjunction with the app? Is there a setting in the Kilo that needs to be clicked?

Edit: It looks like I missed the note above. The Sig Killo10k will need a firmware update that will be available on 4/15. Hopefully that gets it going

 

[one shot ST]

I just upgraded my brand-new Clypso and can now stream wind data to ABQ—very cool! However, I can’t connect it to the Vector X. Since this is a fresh unit, I’m not sure if it was able to connect to the binos before the upgrade.
I’m good with this setup since my goal is to use ABQ as the central hub for calculations, with everything else as peripherals

Try to connect it following the steps below

1 Connect thé Calypso to the application Anemotracker
2 Anemotracker > Pair AB compatible device
3 Pair a new rangefinder

 

[jNCgUN]

Try to connect it following the steps below

1 Connect thé Calypso to the application Anemotracker
2 Anemotracker > Pair AB compatible device
3 Pair a new rangefinder

That’s what I did. Unfortunately the Anemotracker app wasn’t able to find my vector.
My Vector is running firmware 180 and the Anemotracter ver. 17-02-2025

 

[DocUSMCRetired]

That’s what I did. Unfortunately the Anemotracker app wasn’t able to find my vector.
My Vector is running firmware 180 and the Anemotracter ver. 17-02-2025

Is that a Calypso AB Mini? That firmware is out of date.

 

[jNCgUN]

Is that a Calypso AB Mini? That firmware is out of date.

That’s the Anemotracker version. The mini an has 002.022 version.

 

[Rodney65]

I got everything synced but when I turn off aerodynamic jump on the app the Fire 4000 still gives a solution with it.

How do I sync the aerodynamic jump settings? I'm getting a different solution on the app versus the Fire 4000.

 

[DocUSMCRetired]

I got everything synced but when I turn off aerodynamic jump on the app the Fire 4000 still gives a solution with it.

How do I sync the aerodynamic jump settings? I'm getting a different solution on the app versus the Fire 4000.

View attachment 8661611View attachment 8661610

Settings for the App do not translate into settings for the Devices. You would have to turn that off on the device.