AB Quantum Update 3.2! WEZ + Kestrels + CDF!

[adisan77ro]

1) Is your app up to date? Are you on version 3.2.3+ for Android or newer? It appears you are still on an outdated version.
2) Do you have the PIN function turned off on the Kestrel? (This is necessary)
3) Do you have a good battery in place? New?

1) The app was at the latest version available in Google Play on Sunday when I posted.
Version 3.2.2 just came out on Monday and today I updated to 3.2.4
2) Pin = off
30 Battery = new one

Now with new version 3.2.4:
-Scope and reticle data is back
-Stream Wind feature and environmental data update when you press "device" works fine.
-The target DATA, however, is not updated and is not taken from the Kestrel at all
-The support button works (sometimes the application gives an error, but if I try a few times, that's when it works)
-Syncing Kestrel profiles also works, but in the Quantum app they all end up at the same speeds. Speed data is not taken as it is set in Kestrel for each individual profile. And MV Table is not synchronized, just one identical value for all 7 profiles . Even after the sync is complete, the yellow icon / showing that there are differences between the Kestrel and Quantum profiles / is still present. Probably due to the speed values not syncing correctly
- The export function works
This is what I noticed now on Android 14 with Quantum version 3.2.4

 

[DocUSMCRetired]

1) The app was at the latest version available in Google Play on Sunday when I posted.
Version 3.2.2 just came out on Monday and today I updated to 3.2.4
2) Pin = off
30 Battery = new one

Now with new version 3.2.4:
-Scope and reticle data is back
-Stream Wind feature and environmental data update when you press "device" works fine.
-The target DATA, however, is not updated and is not taken from the Kestrel at all
-The support button works (sometimes the application gives an error, but if I try a few times, that's when it works)
-Syncing Kestrel profiles also works, but in the Quantum app they all end up at the same speeds. Speed data is not taken as it is set in Kestrel for each individual profile. And MV Table is not synchronized, just one identical value for all 7 profiles . Even after the sync is complete, the yellow icon / showing that there are differences between the Kestrel and Quantum profiles / is still present. Probably due to the speed values not syncing correctly
- The export function works
This is what I noticed now on Android 14 with Quantum version 3.2.4

Target data is not supposed to transfer form the Kestrel. Incl and Direction shouldn't be pulled.

If it is mixing the MV Temp Tables and MVs then send a support ticket through the app with that information while the Kestrel is connected.

 

[adisan77ro]

Target data is not supposed to transfer form the Kestrel. Incl and Direction shouldn't be pulled.

If it is mixing the MV Temp Tables and MVs then send a support ticket through the app with that information while the Kestrel is connected.

Perfect.
Thank you

 

[DocUSMCRetired]

I noticed on the WEZ parameters that rifle precision is listed in MRAD. Which is no issue, other than in the user manual it's listed for example that high confidence would be .5 MOA, where in the app it's listed as .5 MRAD. I don't mind entering the precision in either format, I just have to wonder if the calculation is still using the input as MOA or if that box is mistakenly mislabeled MRAD. Because the numbers for the preset confidence levels seem to match MOA, where .5 MRAD is pretty crappy precision to be considered high confidence.

It depends on your scope. But also make sure you are on the latest version.

3.2.4 for Android
3.2.3 for iOS

We have updated this to further enhance/correct/stabilize parts of WEZ.

 

[parshal]

It depends on your scope. But also make sure you are on the latest version.

3.2.4 for Android
3.2.3 for iOS

I see only 3.2.1 on the App Store. Updated two days ago.

 

[DocUSMCRetired]

I see only 3.2.1 on the App Store. Updated two days ago.

Apple has been slower lately to get this out to everyone. It can take 72-96 hours for everyone to see it.

 

[parshal]

Ah, I knew it took a while but I thought that meant just pushing out the change not that it didn't appear if you looked directly. Good to now understand!

 

[Steel+Killer]

I noticed on the WEZ parameters that rifle precision is listed in MRAD. Which is no issue, other than in the user manual it's listed for example that high confidence would be .5 MOA, where in the app it's listed as .5 MRAD. I don't mind entering the precision in either format, I just have to wonder if the calculation is still using the input as MOA or if that box is mistakenly mislabeled MRAD. Because the numbers for the preset confidence levels seem to match MOA, where .5 MRAD is pretty crappy precision to be considered high confidence.

I noticed in mine if I choose a rifle that has a MOA scope the high confidence precision is 1.75 MOA if I choose a rifle that has a MRAD scope the high confidence precision is .5 MRAD.

 

[thorium]

Once I connect my Kestrel Elite with AB I am able to use the Elite features. When I click on Upgrade Subscription (which still says Ultralight subscription level) I only see the options for the professional Subscription.

However, when I don't have my Kestrel actively connected, I'm unable to use any of the Elite features and I'm prompted to upgrade my subscription, which still says Ultralight but now also shows the Elite level subscription options.

This is what I see when I first open the app if I don't have my weather meter connected:
View attachment 8599972

I’m having the same problem.
AB Quantum iOS v3.2.3
Kestrel 5700 Elite (“5700AL”)

The Kestrel started life as a “5700 Sportsman” version and I paid to upgrade it to 5700 Elite, mentioning that in the off chance it could be related.

 

[DocUSMCRetired]

I’m having the same problem.
AB Quantum iOS v3.2.3
Kestrel 5700 Elite (“5700AL”)

The Kestrel started life as a “5700 Sportsman” version and I paid to upgrade it to 5700 Elite, mentioning that in the off chance it could be related.

This is something we are tracking and looking at today.

 

[jjurroz]

Point of clarification...
Pairing to a wez model kestrel will upgrade to pro license and unlocks WEZ, CDF cal, and graphing?... or just the wez function?

With the upgrade being an option is there anything additional gained by by paying whatever the pro subscription is vs just upgrading or buying a wez model kestrel?

I can confirm you get all the pro features AFTER you upgrade your kestrel to wez software. I did it yesterday and I can access WEZ, CDF and graphing inside the AB software. In the HUD, top right corner you will now see "Internal (PRO)". Under settings, subscription level, you will still see "Ultralight" despite having the pro features enabled. I'd imagine the AB folks are distinguishing between those who have the pro features via kestrel and those via AB software.

 

[DocUSMCRetired]

I can confirm you get all the pro features AFTER you upgrade your kestrel to wez software. I did it yesterday and I can access WEZ, CDF and graphing inside the AB software. In the HUD, top right corner you will now see "Internal (PRO)". Under settings, subscription level, you will still see "Ultralight" despite having the pro features enabled. I'd imagine the AB folks are distinguishing between those who have the pro features via kestrel and those via AB software.

Correct, and we are updating the app to reduce confusion.

We are also going to move the CDF stuff down to Elite since it is going to be implemented into multiple devices (and already is in some upcoming ones).