Accuracy International AT-X

All cerakoted.

AINA played us on the tanodized one at the USASOC sniper competition and the bag riders.
AI never implied or hinted at doing commercial runs of Tanodized. Just take a deep breath, you have bitched more than my 10 year old when I tell her to go bed.
 
They should have done tanodized. Seems like they are compromising. They prolly run benders too





When the night vision bridges coming. ???
You know just as much as I do about the NV bridges.

Tanodized is rather hard to get consistent results and would be a third party vendor most likely which would incur additional cost that some would bitch about.
 
I ordered one today. They asked me what color. I said the earth or the sand but also said any color. They told me they are getting black and sand very soon. The guy made it sound like I might get a sand before end of year and I ordered today. I’m highly doubting it and not in a hurry. I’ll be one of the few that will keep the CM barrel on it for now and shoot it b/c I have a 6.5 cm gasser. Unless the barrel is shit. They also told me they ordered 100 of these. I’d guess they have shipped at least 25 or more already. EO is where I got it b/c I also bought a demo scope today from them
 
Last edited:
  • Like
Reactions: Darkside-Six
Anyone using an 18" barrel (or shorter)? Wondering about minimum barrel length for enough clearance from the end of the rail for a brake/suppressor......
 
Don’t enable boomers not being able to keep a timeline. I‘d be hearing it from stakeholders if my project was two to three quarters behind. ;)
Its rood to kick a man when he's down, even if you're right.

Dammit I hate the firearms community--always shitting on the little guy. THis is like the 3rd or 4th pre-order I've gotten fucked on. AT least the others didn't involve money.
 
How many times do people really use the folder.
It’s mainly for

-taking cool pictures
-transporting (you can just pull the handguard and barrel with the qc system)
-cleaning (you can just pull the barrel with the qc system )

Edit. No qc handguard

View attachment 7719601
Ya know, when you break it down like this it just don’t seem worth the coin it costs. ;). I’ve been reading this whole post page after page and am trying to make notes for all the accessories to buy on top of this base rifle

Extra mag mv style (can’t remember whic mag). Will they make a new mag for ATX in the future?

Adjustable bag rider (rail style but which one)?

Spuhr 4002 (1.5 inch high)

Mizzle break

If I don’t like stock grip then vertical MDT (but they are fat and make not be good for regular sized hamds)

I have not seen many specific mentions of what bags I see in some pics and videos. (What bags and where to buy)?

Can’t remember if the bolt ball end screw off or not??? Be cool to have skull bolt end LOL

Weights and stainless star head screws
 
Was looking at forend bridges at EO and noticed there's a seperate part number for the taller 20 moa as scope rail for the atx. Wonder what the difference is between it and the one for the at.
 
Well the depression really set in now. Pre-order in February still no rifle, got my 6mm Creed barrel that’s been done for months, spare Mag and weights though.
 

Attachments

  • BA09018F-C3A2-4C35-B5E8-AE4CDE70ECAF.jpeg
    BA09018F-C3A2-4C35-B5E8-AE4CDE70ECAF.jpeg
    667.1 KB · Views: 103
  • Like
Reactions: 3rdfocal
What color did you order and from where ?
FDE from Mile High. They use to tell you what number I was in line, last I talked to them they won’t even do that. So im not sure where I even sit anymore. That last shipment AI posted at the latest should be to Mile High this week if I was allotted one or I’ll be on the shipment after that
 
FDE from Mile High. They use to tell you what number I was in line, last I talked to them they won’t even do that. So im not sure where I even sit anymore. That last shipment AI posted at the latest should be to Mile High this week if I was allotted one or I’ll be on the shipment after that
That’s actually why I went to Euro over Mile High. Euro was much more receptive and will always tell you where you sit. Mile High acted like any ATX info was held in Fort Knox. I don’t need to be coddled when I’m preordering a rifle but a little customer service and positive attitude goes a long way when I have two options to drop $5k.
 
Just chill brothers, chill...

My AT-X has been on order since April, my V4 AutoTrickler won't be delivered until February 2022 at best, my Short Action Customs 6BR die has been on order since April, etc., etc. Good things take time.
 
Anyone who has the weight kits (Sawtooth or AI), could you measure center to center of the mounts to the keyslot for me?

I'm hoping my AT's front accesory keyslot mounts are spaced exactly 4 slots, and I might possibly be able to use some on my current rifle until the new one shows up.
 
Anyone who has the weight kits (Sawtooth or AI), could you measure center to center of the mounts to the keyslot for me?

I'm hoping my AT's front accesory keyslot mounts are spaced exactly 4 slots, and I might possibly be able to use some on my current rifle until the new one shows up.
I can measure mine when I get back home.
 
  • Like
Reactions: The Durk
Ran my red rocket at the Guardian Team Match at GTI this weekend. My partner and I both had AT-X's and shot well enough for to win. His came in Thursday, but I had done the load development with his barrel in tandem with my rifle so we ran the same ammo. So he got his rifle Thursday, dropped the barrel on and setup the rest that night, sighted in Friday and off to the match Sat/Sun. The joys of pre-fit barrels.

Thanks to Dan at Two Vets for the awesome picture.

255102611_1069844940417575_7695372102993842769_n.jpg
 
FDE from Mile High. They use to tell you what number I was in line, last I talked to them they won’t even do that. So im not sure where I even sit anymore. That last shipment AI posted at the latest should be to Mile High this week if I was allotted one or I’ll be on the shipment after that
I ordered @ MHS in mid February, got mine 3 or so weeks ago. You should be close.
Dark Earth also.....
 
  • Like
Reactions: Peter Laurvick
Ran my red rocket at the Guardian Team Match at GTI this weekend. My partner and I both had AT-X's and shot well enough for to win. His came in Thursday, but I had done the load development with his barrel in tandem with my rifle so we ran the same ammo. So he got his rifle Thursday, dropped the barrel on and setup the rest that night, sighted in Friday and off to the match Sat/Sun. The joys of pre-fit barrels.

Thanks to Dan at Two Vets for the awesome picture.

View attachment 7737354
What lrf is that?