Just fine. Indistinguishable from the AX mags, I find.
-
Having trouble using the site?
Contact support
Accuracy International AT-X
- Thread starter Peter Laurvick
- Start date
Just outside top-10. Very satisfied with that for first match with a new rifle.
The Standard Chassis one is the one made for it, although the AR one will more than likely work too as "The AR10/15 compatible Elite grip has a pocket for the detent spring in the top of the grip for a standard AR10/15 safety and is compatible with these rifles"
These rifles in black are like porn.The wait is over
I can’t wait to look and see what your hit percentages were lol like the wolf at 1100 or the 33% ipsc at 938Dude.....I shot that match. Top Gas gun
I finished mid pack , was my first 2 day , my 7th PRs match. Bombed a few stages but real happy about cleaning a few and hitting the aforementioned targets
Addicting is an understatement
That's Mr #104 to you! Still beat a 6.5 gas gun with my little 5.56.
I did get 3/4 impacts on the wolf at that 1100 some yard target on stage 1.
You AI boys that shot the Peterson match did well. Impressive watching back to back impacts at 1120 with that little 22GT. And you could see them… imagine that lol
Ha. You could hardly see the flasher the mirage was so bad when I hit that stage. 107s @ 3164 get out there pretty well
I swear there were tears dripping off of that connex box by the end of the day
@sjbryan65 Ran int same issue with the super tight trigger screw. Talked to MileHigh and all decided just go for it (make sure you have the 2 or 2.5mm allen not an imperial "close" enough); but I think I used a channel lock on allen key while other hand held allen key fully seated and trigger square - it will pop loose you just have to trust.
I read somewhere that ATX had had issues with triggers falling off or moving so Im guessing they decided to torque the piss out of all the new production versions?
Somebody catch me up...
Did we ever get a folding adapter released for the original run or rifles?
Did we ever get a folding adapter released for the original run or rifles?
Yes
Accuracy International AT-X Black Universal Hinge Assembly Kit 29795BL
Accuracy International AT-X Black Universal Hinge Assembly Kit 29795BL For Sale
So they have been making it out? just staying out of stock / on backorder?Yes
Accuracy International AT-X Black Universal Hinge Assembly Kit 29795BL
Accuracy International AT-X Black Universal Hinge Assembly Kit 29795BL For Salewww.eurooptic.com
Yup, I ordered mine January 27th and it shipped May 20th. I was in the first batch from MHSA.
We had a hinge party a few months back. Pictures and everything!
Now waiting on version 3!
Now waiting on version 3!
All the more reason to get that folding adapter...
My "RARE" original AT-X (with all accessories) should be worth even more than I paid for it soon!
Might be an Ai collectable before long
Awesome ATX.
Can you tell me which SPUHR mount you are using?
I was just notified that a red one exactly like yours will be shipped and I am now looking for a mount for the KAHLES 5-25 and am oscillating between the SP-4006 with H34mm and the SP-4001C with H30.
Any suggestions on aftermarket bag riders that you guys like? I'm up in Canuckistan to the north so also on the lookout for someone who ships internationally.
Ebay 3d printed, works slick as hell. Sits very low compared to 90% of chassis bad riders, gets me way up off the ground prone. Kinda thinking bout putting small pic rails on the xlr butt stocks and adding the 3d bag rider to them as well.
AX/ATX/AXMC/ASR Bag Rider Rnd Bottom 2" tall for A.I. rifles AX/ATX/AXMC/ASR | eBay
AX/ATX/AXMC/ASR. Rider is 5.2" long. Picatinny rail mount. Only 2" Tall. Round Bottom.
www.ebay.com
Checkout Sawtooth Rifles MBR. They’ll have a small batch in stock, end of next week. With a larger batch going out for anodizing.
Yes, they ship to Canada.
i got the same, need a mallet to get it on, not sure how to get it offI got the GRS after a handful here recommended it, love it.
Mine was way tight. But veyr nice.
Also, the Gtac bag riders from Sporting Services are good. Faster shipping from the UK to Canada than domestic shipping, shit you not.
usps priority overnight took 2 weeks for me a couple weeks ago .. awesome way to go, and now the UPS pulled some crap on who can ship firearms today
Gotta say I’m super stoked with the AT-X. Have zero complaints….once you open up the magazines, I’ve put through 140 6.5CM rounds and it has been floorless. First comp with it coming up. See how we go but have to say I love it 
. As stated above too Gtac bag rider from sporting services UK is solid and looks unreal. Cheers
. As stated above too Gtac bag rider from sporting services UK is solid and looks unreal. CheersLarge flathead screwdriver in the slotted rear portion and twist. Comes on/off freely.i got the same, need a mallet to get it on, not sure how to get it off
Looks like a sweet option I did find a GRS unit up here and ordered one relatively cheap at $90 up here. The GTAC just got added to cart though ;-) Thanks for the lead on that
So Ii ran my unmodified AX and AW mags a few weeks back and the AX with 6GT ammo would fail to feed rounds from the left side of the stack pretty regularly. I cycled 4 mags of each the AW never failed to feed. The AX did a couple of times each mag.
Today I ran a 80 round match with a 2 pieces of tape over the back of the AX mag lifting it up, AW unmodified. Both mags ran flawless at the match. I alternated mags each stage. My theory is the AW without the front lip allows the mag to be more horizontal and inline with the bolt and less likely to have the bolt run over the top. The AW still has play and i expect if a stage put pressure on the mag lifting the front similar failure would occur. Not a fan of duct tape on my gear would be interested in shimming the mag catch.
Today I ran a 80 round match with a 2 pieces of tape over the back of the AX mag lifting it up, AW unmodified. Both mags ran flawless at the match. I alternated mags each stage. My theory is the AW without the front lip allows the mag to be more horizontal and inline with the bolt and less likely to have the bolt run over the top. The AW still has play and i expect if a stage put pressure on the mag lifting the front similar failure would occur. Not a fan of duct tape on my gear would be interested in shimming the mag catch.
Have you opened up the top part of the mag to match the measurements of the bottom where the rib is? I think feeding comes down to overall length of rounds too. Maybe HRD would make a good addition if can still fit the 6GT?
That's the Gen2 prototype of a bag rider we are working on down in Melbourne, Australia. I have the current spec one on my AT-X that is fairly different and the direction they will likely end up in.
Not yet available sorry man.
Have you opened up the top part of the mag to match the measurements of the bottom where the rib is? I think feeding comes down to overall length of rounds too. Maybe HRD would make a good addition if can still fit the 6GT?
The HRD kits will not work without some modification. Basically the spacer is a little to deep for the GT cases to fit inside the front ribs.
You could essentially take some material off the spacer, but then the follower would be too short and leave a little space to potentially bind.
Yep, same thing for me. The AX mags are just slightly off in their geometry and cause the bolt to run over the rear of the case. Like you said, if you figure out a way to lift the rear of the mag slightly, they feed fine.
If you do end up shimming the latch, post pictures of how you do it and how it’s working. I’ve found that running the cases forward in the mag (as if there were a spacer without actually using a spacer) works about 98% reliably. Still need to mess with it a little bit to see if I can get it perfect.
Have you opened up the top part of the mag to match the measurements of the bottom where the rib is? I think feeding comes down to overall length of rounds too. Maybe HRD would make a good addition if can still fit the 6GT?
These are 6.5CM Prime Factory, the 6GT Hornady sit the same against the back and along the lips on both sides.
Last edited:
This is not the same mag issue that was being discussed earlier in the thread… this is specific to GT cases.
My mags/feed lip engagement is fine, but something about the geometry of the GT sits the case heads too low in the mag when they are fully seated to the rear, causing the bolt to skip over them.
Asked AI about it and they basically said “the mags aren’t designed to work with those cases.” Hence possibly shimming the latch as a solution.
