Accuracy International Picture Thread

[NoLegs24]

EuroOptic has about 20 ASR/ AXSR .308 Mags available. Get them while you can... LINK ------> ASR/ AXSR .308 Mags

For those running AXMC's, you won't need the mag adapters with these mags.

 

[MACHTECH]

They've got one less elite sand 300 Norma now.

 

[BuLLet]

Congrats.. I'm thinking now maybe this would be better then the DE

They've got one less elite sand 300 Norma now.
View attachment 7333356

 

[MACHTECH]

Thanks! FYI... with a little modification of the grip area, it fits in the transit case perfectly.

 

[BuLLet]

I was thinking about getting one of those... I have a AXMC with a 20 Inch 300 WM to fit perfectly in it

 

[bunny too]

My new AXMC .338 LM

four rounds at 600 meters (the fifth round I am not discussing.)

 

[Mr. F]

Thanks! FYI... with a little modification of the grip area, it fits in the transit case perfectly.
View attachment 7333367

Im never gonna financially recover from this photo...

 

[HillBilly n TX]

They've got one less elite sand 300 Norma now.
View attachment 7333356

Well, that just made up my mind! Incredible looking rifle.

 

[kocustoms]

EuroOptic has about 20 ASR/ AXSR .308 Mags available. Get them while you can... LINK ------> ASR/ AXSR .308 Mags

For those running AXMC's, you won't need the mag adapters with these mags.

Well they had 20 lol

 

[kocustoms]

My new AXMC .338 LM

four rounds at 600 meters (the fifth round I am not discussing.)

It’s always that 5th shot haha

 

[BLKWLFK9]

Finally got my wife to shoot a rifle for the 1st time in her life. Took her straight to the 511 yard target. She has been terrified of guns until now. Now shes got the bug and wants to shoot all my rifles.

 

[kocustoms]

A fun quiet evening shootout with @Huskydriver @Mr. F and myself!!

 

[Nik H]

Sweet baby Jesus...ASR magazines for short action cartridges got released today on EuroOptic

My LH AXMC is really an AXMC now

Gods be praised

 

[samb300]

Sweet baby Jesus...ASR magazines for short action cartridges got released today on EuroOptic

My LH AXMC is really an AXMC now

Gods be praised

Just in time to sell it at a loss and buy a LH AXSR hahaha

 

[Longshot85]

To all.........keep the photos coming gents.....looking great

Sweet baby Jesus...ASR magazines for short action cartridges got released today on EuroOptic

My LH AXMC is really an AXMC now

Gods be praised

Bring me up to speed please on a few things:

1. Do AXSR mags fit AXMC? (If so I'm assuming this deletes AXMC mag adapter?)

2. What's the status of any functional .223/5.56 conversion?

3. Has anyone played with .37XC or .41XC? (I may ask in ELR forum too in case they don't visit here much)

 

[PrecisionRifleGuy]

Added the RRS plate.

 

[Malcolm1982]

Just added the Victor Company rail to the AI AX short action. I love the extra 3 inches it offers over the standard rail. (That is what she said).

 

[Nik H]

To all.........keep the photos coming gents.....looking great

Bring me up to speed please on a few things:

1. Do AXSR mags fit AXMC? (If so I'm assuming this deletes AXMC mag adapter?)

2. What's the status of any functional .223/5.56 conversion?

3. Has anyone played with .37XC or .41XC? (I may ask in ELR forum too in case they don't visit here much)

1. Yes they fit the AXMC. AI never released a magazine adapter for left handed AXMCs. This was what lefties have been waiting for to allow us to shoot short action cartridges through the long action
2. Don't know anything about a conversion for .223 from AI.
3. I have discussed 37XC with a couple of people. I am still considering doing so. It is a great cartridge

 

[kocustoms]

View attachment 7333779
Added the RRS plate.

who makes your bullet quiver?

 

[Mr. F]

who makes your bullet quiver?

@kocustoms Hoptic USA

 

[Jrb572]

To all.........keep the photos coming gents.....looking great



Bring me up to speed please on a few things:

1. Do AXSR mags fit AXMC? (If so I'm assuming this deletes AXMC mag adapter?)

2. What's the status of any functional .223/5.56 conversion?

3. Has anyone played with .37XC or .41XC? (I may ask in ELR forum too in case they don't visit here much)

They do not offer a 223 conversion for The AXMC. Or at least not yet

 

[Batemanb12]

Got out and sighted in the AXSR and rang some steel.

 

[Nodakplowboy]

View attachment 7329031

Happiness is a pile of empty AI brass.

 

[kocustoms]

Got out and sighted in the AXSR and rang some steel.

View attachment 7334114View attachment 7334117View attachment 7334119View attachment 7334121

thats a good looking rig

 

[Surly]

Looks good. How did you like it?

Got out and sighted in the AXSR and rang some steel.

View attachment 7334114View attachment 7334117View attachment 7334119View attachment 7334121

 

[Batemanb12]

Looks good. How did you like it?

It is damn nice, the 300NM is very manageable not much more recoil than my .308 and it hits with authority. Initial groups at 200 were around ..75 with factory Berger ammo.
I loaded up some 215 Bergers on top of H1000 and it
Hammers.

Lapua
215M
Avg-3070
Es-9
Sd-3.5

 

[richthe1]

Recently purchased an AI and was able to take it out for the second time today. I have two questions.

1. (See first picture) What is this black grease/oily residue? It looks like it’s coming from the bolt? I wiped it a little bit so that’s why it looks smeared.

2. The bipod stud adaptor came loose. I tried to tighten it up with the supplied 4mm hex key in the buttstock but it seemed just barely oversized? It barely fit in the top portion, but didn’t seat all the way and I felt like I was stripping it. I tested the 4mm key on the other screws on the pic rail and qd rail adaptors and it went in securely. Is it a different size? Should I use loctite to prevent this from happening again? Any specific torque spec? After tightening as best I could I was able to shoot my first 5 round group with it. (Second pic)

Thanks for the help!

 

[Heretoimproveforhunting]

the bipod stud pic rail should be the 4mm.

 

[samb300]

Recently purchased an AI and was able to take it out for the second time today. I have two questions.

1. (See first picture) What is this black grease/oily residue? It looks like it’s coming from the bolt? I wiped it a little bit so that’s why it looks smeared.

2. The bipod stud adaptor came loose. I tried to tighten it up with the supplied 4mm hex key in the buttstock but it seemed just barely oversized? It barely fit in the top portion, but didn’t seat all the way and I felt like I was stripping it. I tested the 4mm key on the other screws on the pic rail and qd rail adaptors and it went in securely. Is it a different size? Should I use loctite to prevent this from happening again? Any specific torque spec? After tightening as best I could I was able to shoot my first 5 round group with it. (Second pic)

Thanks for the help!

Don't use loctite on the accessory screws. First I'd remove one of the other pic rails, and steal the screws from it and swap them on your bipod adapter. Chances are it's simply an out of spec screw. If that doesn't fix it give AINA a call (or wherever you bought it from).

 

[flyright]

Oh sh!t, that's the magic fairy dust in suspension. Try not to wipe too much of it away.

 

[eo3x0]

Mounted a new ZCO527 on Spuhr QDP-6002 and recently added the RRS plate. I’m feeling like my AXMC is finally “done” for the time being except for minor tweaks here and there.

You know you’re happy with your rifle when all these new AXSR photos aren’t making you flinch. Just need that 308 mag to come in

 

[Nik H]

View attachment 7334432

Mounted a new ZCO527 on Spuhr QDP-6002 and recently added the RRS plate. I’m feeling like my AXMC is finally “done” for the time being except for minor tweaks here and there.

You know you’re happy with your rifle when all these new AXSR photos aren’t making you flinch. Just need that 308 mag to come in

Totally agree!

Our rifles are twins other than mine is left handed...

 

[Surly]

awesome, glad to hear! How did you like the action? Feeding, bolt throw etc. Thanks for sharing

It is damn nice, the 300NM is very manageable not much more recoil than my .308 and it hits with authority. Initial groups at 200 were around ..75 with factory Berger ammo.
I loaded up some 215 Bergers on top of H1000 and it
Hammers.

Lapua
215M
Avg-3070
Es-9
Sd-3.5

 

[kocustoms]

another successful range day!! @Huskydriver @Mr. F and myself. Met a few other guys today as well!! Lots of fun and piles of brass were had today!!

 

[Scotch_egg]

another successful range day!! @Huskydriver @Mr. F and myself. Met a few other guys today as well!! Lots of fun and piles of brass were had today!!
View attachment 7334497

I love that you guys all run Harris bipods

 

[Huskydriver]

I love that you guys all run Harris bipods

Don't hate.... mate!

 

[tevans0707]

For anyone interested, there is a PRS match June 20th here in Manti, Ut. @Huskydriver and I are signed up, @Mr. F and @kocustoms get in on it! Let's see how many AI guys we can get into the match!

Below is the registration link.

Home | PractiScore

practiscore.com

 

[Mr. F]

IN

 

[Movistar]

I miss Utah. I was born and raised in Holladay but I had to move to Boise for work a few years ago. I hope to be back and get totes jeally of the Utah AI crew.

 

[Huskydriver]

I miss Utah. I was born and raised in Holladay but I had to move to Boise for work a few years ago. I hope to be back and get totes jeally of the Utah AI crew.

You should come shoot one of the matches with us at blue Creek then

 

[tevans0707]

I miss Utah. I was born and raised in Holladay but I had to move to Boise for work a few years ago. I hope to be back and get totes jeally of the Utah AI crew.

You should come shoot one of the matches with us at blue Creek then

@Movistar there's a Blue Creek match on June 13th also!

 

[Cc2cuz]

 

[Badfinger]

Welcome to the addiction

 

[Cc2cuz]

Sorry, I’m new here. Couldn’t figure out how to type and post a pic in the same post lol. Love this forum. Just got my scope mounted and thought to contribute because everyone loves pics right?. Still waiting for my bipod

 

[Surly]

Sweet rig!! Makes a guy stiff

View attachment 7335040

 

[Mr. F]

@Movistar there's a Blue Creek match on June 12th also!

13th my friend.

 

[Kidster]

Popped my AI !!!!!!!!!!!!!!

 

[Movistar]

View attachment 7335114

Popped my AI !!!!!!!!!!!!!!

Nice! What color is this??? Elite sand or DE? PB? What moa Spuhr is that?

I wish I could attend that shoot that weekend but I’ve got a divorce trial on the 15th and will be prepping that weekend. Thanks for inviting me. Utah gun guys are always cool like that.

 

[Kidster]

Nice! What color is this??? Elite sand or DE? PB? What moa Spuhr is that?

I wish I could attend that shoot that weekend but I’ve got a divorce trial on the 15th and will be prepping that weekend. Thanks for inviting me. Utah gun guys are always cool like that.

DE
10.3 MOA

 

[wick182]

AT LE, barrel is straight jacket armory proof 21.5" 6.5 CM.