Accuracy International Picture Thread

[Huskydriver]

300 yards just to verify my dope from the prone.... That's a .5" paster...
I think it shoots aight..... 175smk 41.5 gr varget. Seated .02 off.

 

[samb300]

more from the class.
View attachment 7466984jView attachment 7466985View attachment 7466989View attachment 7466990

Just curious, and not being snarky. Have you looked into your body position and scope position? Your scope is crazy far forward, and you have a really long LOP on the stock as well. I know the VW shooting position is compromised, but the picture of you on the barricade makes it look like your body is bladed, your head is canted, and the stock is more in your middle of your shoulder than your collar bone/shoulder pocket. Wondering if you've considered bringing the scope rearward a bit and squaring up more behind the rifle?

 

[JB.IC]

I’m thinking about revisiting an old idea I had but I was thinking about buying the AXSR in 338LM and wondering if anyone has cleaned the chamber up with a 33XC reamer without needing to set the barrel back?

anyone have the receiver print for the action?

 

[Longshot85]

I’m thinking about revisiting an old idea I had but I was thinking about buying the AXSR in 338LM and wondering if anyone has cleaned the chamber up with a 33XC reamer without needing to set the barrel back?

anyone have the receiver print for the action?

^^ someone smarter than me please enlighten us........this would be great to know for future reference

 

[NoLegs24]

@JB.IC Good luck getting those receiver prints...

Only useful info you'll get is, M30x2 threads. 1.5" From shoulder to the breach face.

 

[Sniperwannabee]

Finally did my satin nutmeg barrel paint job that @Huskydriver recommended. super happy with the way it turned out! Thanks a lot for the tip!

 

[Huskydriver]

Finally did my satin nutmeg barrel paint job that @Huskydriver recommended. super happy with the way it turned out! Thanks a lot for the tip!View attachment 7468307

Looks great! Almost too clean gotta get that sucker dirty and banged up

 

[TheBoctor]

Alright now I've gotta ask, whose Satin Nutmeg is it that gets them that close? Even my mile high barrels don't match that close.

 

[Sniperwannabee]

Alright now I've gotta ask, whose Satin Nutmeg is it that gets them that close? Even my mile high barrels don't match that close.

Accessories - Axmc 6.5cm hawk hill 26" barrel 5/8 threads

560 rounds down the pipe. Absolutely hammers 147 eldm's all day and 140 Hornady bthp. I'm going back to a shorter pipe. Been spray painted to match pale brown but can easily be removed when wiped with acetone back to bare steel. Muzzle brake and tennon thread protector not included. First two...

www.snipershide.com

 

[Huskydriver]

Alright now I've gotta ask, whose Satin Nutmeg is it that gets them that close? Even my mile high barrels don't match that close.

Obviously not an exact match but close especially once it cures and gets a lil dirty.

 

[Simia Dei]

Obviously not an exact match but close especially once it cures and gets a lil dirty.
View attachment 7468580
View attachment 7468582

I’m shitty that’s not available over here. Ended up having to duracote mine

 

[Movistar]

Well it’s here. I have to say I’m totally disappointed. Its a cheap hat with an awesome AI logo embroidered. The hat is so shallow and doesnt fit anything like my Condor camo hat. I’m so let down. This is unwearable. My 10 year old boy will be happy to have it but that’s just going to make me salty every time I see him.

 

[Movistar]

It is also noticeable that the AI logo isn’t centered. Am I wrong?

My wife likes it... maybe she can wear it

 

[Sniperwannabee]

cut the patch off and put it on your hat of choice

 

[Movistar]

That sucks, I do like the hats that are "shallow", they are easier to shoot while wearing for hearing protection and such than a standard baseball cap though. Wished they would have used a USA manufacturer. Sorry you had to take one for the team. They wont sell many now...

It does say “cut sewn and assembled in the USA”... I just have a lot of hats and the irony is this and a Noveske hat are the only two I’ve bought sight unseeen and they are the only two that both have this issue

 

[SkyScrapin]

Same issue here. No bueno.

 

[TheBoctor]

Obviously not an exact match but close especially once it cures and gets a lil dirty.

Son of a bitch i just used 4 cans of that exact stuff on my goose pit lid. Turns out "AI Pale Brown" is also "Northern Colorado Corn Field Dirt Brown"

 

[Conqueror]

I got the same hat email blast and the pics looked like they were pretty low-quality hats, glad to dodge this bullet. Bummer that they would sell these.

 

[NoLegs24]

Mine are damn centered. So I’m good to go

 

[BuLLet]

The hats I received from AINA are a bit different, for the better

Got two different colors, this one and a greenish color.

 

[Movistar]

I guess we can’t all be good at everything. AI makes such a bitchin rifle I figured the hat would be a gimmie but not so much.

is it me or did the value of hats like nolegs24 and BuLLet have just went through the roof?

I sure love my rifle. Best purchase I’ve ever made.

 

[BuLLet]

Here's the back of the hat.

 

[Frank Green]

Still has to get cerakoted on the barrel....but going to use it for hunting in a week. Yep it's a laser beam.

Yes it's a lefty AIAT. Finally got a lefty AI!

Did the barrel in 6.5Cm and 1-7.5 twist finished at 23".

Later, Frank
Bartlein Barrels

 

[BuLLet]

When you made the barrel did you left twist it

Still has to get cerakoted on the barrel....but going to use it for hunting in a week. Yep it's a laser beam.

Yes it's a lefty AIAT. Finally got a lefty AI!

Did the barrel in 6.5Cm and 1-7.5 twist finished at 23".

Later, Frank
Bartlein Barrels

 

[Frank Green]

When you made the barrel did you left twist it

Nope I did a right hand twist.....so still in theory the left hand twist will torque the gun into me but in smaller calibers...etc...I don't think it means a hill of beans.

I did think about it though! LOL!

Later, Frank

 

[THEIS]

Hi,

Patiently waiting for my batch of LH Gains

Sincerely,
Theis

 

[Sniperwannabee]

id call Reggie direct with the contact info provided to purchase a hat!!! Here his website:

Reggie Matthews Promotions | Raleigh, NC 27604

 

[THEIS]

View attachment 7469005


id call Reggie direct with the contact info provided to purchase a hat!!!

Hi,

Bet you Reggie cannot make that cap without AINA written approval.

Sincerely,
Theis

 

[Sniperwannabee]

Hi,

Bet you Reggie cannot make that cap without AINA written approval.

Sincerely,
Theis

Curious as well, the hat is on the main page of his website

 

[powdahound76]

@Movistar - well, not sure what a dude name movistar looks like, but your wife is still better looking than you!!

 

[Movistar]

@Movistar - well, not sure what a dude name movistar looks like, but your wife is still better looking than you!!

You’re not wrong. I’m going to take this opportunity to brag. When you find the right one; you win at life. We have a lot in common and share all the same likes. She loves guns, shooting, America, Freedom, football, fantasy football and “other stuff”... we like the same music, she’s smart as a whip, smokin hott, and seriously rad. She’s not a bad shot either.

I shouldn’t brag, but life’s pretty good man. When I was debating the ASR kit vs the AXSR she was the one that insisted I get the ASR kit because it was more special and she thought I “deserved it”... what a lady. I am punching well above my class here...

 

[BuLLet]

Can we make an exchange.?

You’re not wrong. I’m going to take this opportunity to brag. When you find the right one; you win at life. We have a lot in common and share all the same likes. She loves guns, shooting, America, Freedom, football, fantasy football and “other stuff”... we like the same music, she’s smart as a whip, smokin hott, and seriously rad. She’s not a bad shot either.

I shouldn’t brag, but life’s pretty good man. When I was debating the ASR kit vs the AXSR she was the one that insisted I get the ASR kit because it was more special and she thought I “deserved it”... what a lady. I am punching well above my class here...

View attachment 7469057

 

[Movistar]

Can we make an exchange.?

Yes! That is so kind. I’ll send you my new crappy hat and you can send me one of your good original hats. What a dude. Seriously what a gentleman. Thanks BuLLet!

 

[Hey You]

I also have the Reggie Mathews hat and every time I wear it my wife says it is TOO small. At least my logo is centered...like my shots

 

[MysizeisMAGNUM]

Finally did my satin nutmeg barrel paint job that @Huskydriver recommended. super happy with the way it turned out! Thanks a lot for the tip!View attachment 7468307

@Huskydriver always giving just the tip

 

[BuLLet]

I was thinking you'd come up with the rifle, axsr for asr

Yes! That is so kind. I’ll send you my new crappy hat and you can send me one of your good original hats. What a dude. Seriously what a gentleman. Thanks BuLLet!

 

[MACHTECH]

No complaints with the carhartt hoodies!

 

[Huskydriver]

@Huskydriver always giving just the tip

 

[Sixfivesavage]

I also have the Reggie Mathews hat and every time I wear it my wife says it is TOO small. At least my logo is centered...like my shots

You sure she's talking about the hat...?

 

[Mr. F]

This turned from a rifle pic thread into a hoodie and hat thread in a minute... AI shooters are like cats, you buy em expensive shit and they play with the box.

 

[Huskydriver]

My hat logo is perfectly centered and boss fit...dunno what kind bush league y'all are playing with....

 

[Mr. F]

Unbelievable...

 

[bb505]

This turned from a rifle pic thread into a hoodie and hat thread in a minute... AI shooters are like cats, you buy em expensive shit and they play with the box.

Exactly, at least have the rifle in the picture with the hat...sweatshirt...wife...whichever.

 

[kilgore001]

Didn’t realize AI gear was so hard to get? I posted up on EBay a couple days ago an Accuracy International embroidered polo that I got from Tac Pro Shooting Center with the purchase of an AE back in the day.

 

[Mr. F]

Didn’t realize AI gear was so hard to get? I posted up on EBay a couple days ago an Accuracy International embroidered polo that I got from Tac Pro Shooting Center with the purchase of an AE back in the day.

View attachment 7469306

@Huskydriver More stock for your AI department store.

 

[Huskydriver]

screw the hat, I love those pups!!

The one on the left is secretly plotting to overthrow me as alpha and kill me in my sleep I'm pretty sure...if I didn't run him all winter long, he would weigh 200lbs he's so lazy.

The one on the right has won GQ Husky most sexy stud of the year 4 times running but he is dumber than a bag of rocks and terrified of everything... But at least he knows his left and right and loves to pull the sled so not total loss.

 

[kocustoms]

Finally got all the AI parts together for a near complete package. 308/6.5CM/300WIN/338LAPUA
now I just need a PVS30 / and RRS tripod/ and a TBAC
#unofficalteamAIUT

 

[Sniperwannabee]

UT boys shoot 300 Norma so ..... fail

 

[kocustoms]

UT boys shoot 300 Norma so ..... fail

you from UT too? only utah boy I know that can get first round hits at a mile with 300 Norma is my boy @Huskydriver

 

[Huskydriver]

@Huskydriver More stock for your AI department store.

Only if it comes in schmedium and only in coral red...

you from UT too? only utah boy I know that can get first round hits at a mile is my boy @Huskydriver

Complete luck that day