There’s been a decent amount of ZCO in the PX as well. $3700-$3800 compared to $2800-$2900 many ATACR go forI
Im shopping used in the PX if that helps.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
There’s been a decent amount of ZCO in the PX as well. $3700-$3800 compared to $2800-$2900 many ATACR go forI
Im shopping used in the PX if that helps.
Okay…not to derail the thread any further buttttt
For my new AT, if I was looking at a 4-16x42 ATACR, the 7-35, or a 5-25PM2 which would you go with?
This is super helpful. I like the 4-16, but I think I’m gonna want more magnification. 5-25 or 7-35 seem to be the ideal range.I commented on your ATACR thread with my AT/NF combo. 4-16X42. But I’ll be more specific
This gun is primarily used as a hunting gun. Crop damage to be exact. It’s on a 308 20” barrel. Primary use being shooting deer inside 500 yards. It’s perfect for that and 4X is useful for close range in low light
My AXMC wears a 7-35 ATACR. I haven’t had a chance to hunt with that yet.
That said I have been left wanting more magnification to ID deer (antlers) at the 400+ yard ranges. As what I shoot needs to be does.
I have used many other higher mag scopes like Athlon Cronus BTR 4.5-29 and deem this a good magnification range for all around shooting
So moral of my story is I like 4X on low end for low light and being this is a primary hunting rifle it works out very well. If I was hunting longer ranges or target shooting 800+ yards I’d opt for the 7-35. I rarely shoot my higher power scopes near max magnification. I will when load testing or identifying at long ranges
Keep in mind there’s a decent size difference between the two. If that matters to you. I’ve posted the pic before but here’s the two in comparison for size. The AX is about 12” behind the AT in this pic. Low profile/locking elevation turret on the 4-16 is nice as well for my application
View attachment 7852390
A lot of people who use both say the 7-35 has the best glass. I haven’t used the 5-25 so I can’t compare. If you think you use the magnification then get it. Can always turn it downThis is super helpful. I like the 4-16, but I think I’m gonna want more magnification. 5-25 or 7-35 seem to be the ideal range.
Before I fuck this up, is it possible to back the trigger screw out too far or does it have a hard stop?
Shoot me pm and I can walk you through itUhhh factory AX trigger "17 model
Especially if you run suppressed.Inertia trigger on Labradar is the way to go.
No perfectly aiming, or issues with microphone picking up. Just point at target and shoot.
No it won’tSo it’s cold outside, the shed is all looked up, I’m afraid of the dark and various other excuses for me not going out and checking myself but can anyone confirm or deny if AX and AXMC barrels are interchangeable between actions?
Picked up the AXMC very recently with a short action 308 bolt kit. So I’m wondering if my AX 6.5 barrel will work with it. Meh if not but it would be handy to know.
Failing an answer I’ll check tomorrow lol.
They make 6.5 for the AXMC. I’ve been waiting on a 2018 profile one for mine. Picked one up here from a member as well for mine.Yeah cheers. I thought that would be the case but just hadn’t checked.
Your AXMC barreled are M30 thread pitchYeah cheers. I thought that would be the case but just hadn’t checked.
That’s a strange looking tripod and head.So it’s cold outside, the shed is all looked up, I’m afraid of the dark and various other excuses for me not going out and checking myself but can anyone confirm or deny if AX and AXMC barrels are interchangeable between actions?
Picked up the AXMC very recently with a short action 308 bolt kit. So I’m wondering if my AX 6.5 barrel will work with it. Meh if not but it would be handy to know.
Failing an answer I’ll check tomorrow lol.
HOW HAVE I NOT KNOWN ABOUT THIS PRODUCT?!I use a Piet recoil trigger with that offset, picks up every shot and no errors after adjusting trigger sensitivity to 3.
Just be sure to get the sensitivity right or it will drive you a little batty. Closing the bolt can cause it to trigger the radar if you have the sensitivity to high. Which can be a pain when you're in prone and behind your scope and now you have to "reset" the radar.HOW HAVE I NOT KNOWN ABOUT THIS PRODUCT?!
I have one in the mail now.
What setting do you have yours at? I had mine at the highest setting and just about any kind of movement will set it off.Just be sure to get the sensitivity right or it will drive you a little batty. Closing the bolt can cause it to trigger the radar if you have the sensitivity to high. Which can be a pain when you're in prone and behind your scope and now you have to "reset" the radar.
I’m pretty sure I have it set at 3.What setting do you have yours at? I had mine at the highest setting and just about any kind of movement will set it off.
The tripod is your run of the mill heavy duty carbon fibre job with spiked feet. Ball head is a the same as this one on my magnetic mount.That’s a strange looking tripod and head.
What’s the brand of that head? Never seen that one.The tripod is your run of the mill heavy duty carbon fibre job with spiked feet. Ball head is a the same as this one on my magnetic mount.
It’s not this exact one but pretty much the same thing.What’s the brand of that head? Never seen that one.
It is done. I have a 7-35 ATACR with the MIL-XT reticle on order.A lot of people who use both say the 7-35 has the best glass. I haven’t used the 5-25 so I can’t compare. If you think you use the magnification then get it. Can always turn it down
Did you get the black one or the new dark earth?It is done. I have a 7-35 ATACR with the MIL-XT reticle on order.
Did you get the black one or the new dark earth?
BlackDid you get the black one or the new dark earth?
I got mine through EVThere’s a brand new black for sale for 3050 in the exchange. Great deal
What’s your load for that. I just started shooting some 140 ELDM’s as well. Using 41.5 H4350 just finished settling in the barrel so gonna see how it groups now but so far it’s running right at 2750.Some more blue magic today. Got a couple of new mags from @Scott Seigmund and my AT-X hasn't had a single hiccup feeding
Nice day today, a bit breezy though.. Still can't beat another day at the range!
This has about 50 rounds though it now, impressive groups with a basic loading of 140 ELDM and H4350.
View attachment 7855521
View attachment 7855524
View attachment 7855525
What’s your load for that. I just started shooting some 140 ELDM’s as well. Using 41.5 H4350 just finished settling in the barrel so gonna see how it groups now but so far it’s running right at 2750.
Gen 2.0 AXs are just built…differentYou’re not supposed to dig up potatoes with it, dummy.
I will follow up with Christian in Norway, I’ll see where he’s at with the production version buttstock. @BLKWLFK9 will be getting his buttstock to test soon.
Mine is getting painted up all Purdy today and tomorrow.
I was just talking about this with someone last week.Inquiring mind wants to know how many AI shooters here have changed their barrel using the trademarked Bynum Sledge and Cressent method?
Probably not many. All the newer Gen rifles with Quick Loc can swap barrels by hand without tools, and not too many guys are shooting 10,000 rounds of 308 a year with their AWs like Jacob does.Inquiring mind wants to know how many AI shooters here have changed their barrel using the trademarked Bynum Sledge and Cressent method?
I have with my old MKIII.Inquiring mind wants to know how many AI shooters here have changed their barrel using the trademarked Bynum Sledge and Cressent method?
Do you mean pale brown?You go all gold tho?
Do you mean pale brown?