Anyone know who makes the rubber magazine bumpers/pads?
I cracked my AXSR's 308 plastic base during a reload over concrete. I took a page out of the VA's playbook and used superglue and tape to put it back together....but would like to see if there are rubber slipovers that might help prevent it on the other mags.
I cracked my AXSR's 308 plastic base during a reload over concrete. I took a page out of the VA's playbook and used superglue and tape to put it back together....but would like to see if there are rubber slipovers that might help prevent it on the other mags.
8 beers deep, feeling froggy. May take the 7 axis to my bolt later because AI doesn’t know how to engineer a cocking ramp 
Life hack if you’re coating an AX- Knock the sharp edges off of the forend attachment area so you can use the sawtooth arca block and make it look less unfinished. It felt kind of wrong to take a file to the chassis the day I got it and I didn’t get quite it as perfect as I’d like, but it definitely makes it look more natural.
Def seems like an easy job for the 7axis Dremel
Gave the Purple blaster a refresh. 90s water cup vibes
Here's this too
Here's this too
You need one of these to go under it 
Currently a impact action in a mdt ACC with a proof 6gt prefit. Here soon changing to a Kelbys Prometheus with lothar walther barrel chambers by follow through rifleworks in 6gt
My son (7) was slaying at 430yds until a dude set fire to the range with tracers…
#ESIsTheOneTrueColor
Get an elite iron spigot. Tuck that bipod up before it gets caught on a trip wire
This should be it
D
Deleted member 115591
Guest
Me and a buddy took our AI's out again to 2000 yards. Pretty consistent hits.
Wanted to thank pfl338 again for the great adjustable bag rider. Second time out with it and liking it even more!
Wanted to thank pfl338 again for the great adjustable bag rider. Second time out with it and liking it even more!
Last weekend, at Whittington Center, first time I had her out. 1200 yd/1000 meter white Buffalo in the clearing....super nice to shoot, super happy with the purchase.
One of my buddies shot it, remarked on the ejection of the brass- "man this thing HATES brass....sure is smooth!"
Had to agree, the ejection is robust, bolt throw is smooth.
Once again, very pleased, all of the AI the praise is warranted!
One of my buddies shot it, remarked on the ejection of the brass- "man this thing HATES brass....sure is smooth!"
Had to agree, the ejection is robust, bolt throw is smooth.
Once again, very pleased, all of the AI the praise is warranted!
Attachments
Letting the 22GT eat today. 90’s at 3160. No recoil and stupid accurate. 10/10 would shoot again. Tremor 3 works pretty damn good too
Just picked up this AXSA this weekend in .308. This is my first AI, but not my first long range rig. I haven’t shot it too much yet, but it’s impressed me so far. The group shown was my first group with it, and zero confirmation. Stretched it out to 300 which is as far as I could shoot where I was, and stacked a few rounds onto a 4” gong. I can’t wait to take it out farther, it is definitely a capable rifle.
Attachments
Attempted to try several different factory loads at 100yrs.
- Best 10rd grouping (upper left) was with 175gr Fed Gold Medal Match (BTHP)
- Best 10rd grouping (upper left) was with 175gr Fed Gold Medal Match (BTHP)
Did you happen to try the 168gr of the same Federal Gold Match? That is the recipe for my 308. I can't find a more accurate round.
Sierra 155 gr Palma #2156 works well in .308 10 twist. No recoil. It constantly hammers out to 1200 yards. Gonna be doing load development for Sierra 169 gr soon.
^^ 47 gr of Varget
^^ 47 gr of TAC
Pre fit AI 26” 10 twist
Using .308 small rifle primer cases
cci 450 small magnum primers
Is this Racine rifle range in WI?View attachment 8101393
View attachment 8101405
My 6BR AT. this is my first rifle to ever achieved 1/4 MOA 5 shot group at 100 yards. I ve been enjoy shooting the small rocks at 550 yards berm and see them launching into the air lol. She likes 105 berger hybrid with 30.6 gr Varget.
Awesome! I’m a Milwaukee native, and been a member at RCLRC for like 7 or 8 years. Are you planning on shooting any of the WPRC club matches in the area?
For anyone interested in doing up a shorter length of pull ATX for a younger shooter I found out a gen1.5 is about a 1/2” shorter than a gen3 and if you pull the adjustable buttstock unit out and drill/tap one extra hole and re-attach the buttpad you can reduce the length of pull a total of 1.5”.
I found a donor gen1.5 buttstock and drilled/tapped an extra hole (circled in red). Fully extended it’s about an inch shorter LOP than I usually run.
I found a donor gen1.5 buttstock and drilled/tapped an extra hole (circled in red). Fully extended it’s about an inch shorter LOP than I usually run.
