Getting all my stuff ready for tomorrow’s match. Wow oh wow have I been missing out on this Armageddon Gear 40/40 ammo carrier. All of my ammo for the day
fits in the small outside pocket of my pack.
I love my AX but really miss my 2.0 legacy chassis when I see those thumbhole stocks. I’ll probably have to break down and buy an AT w/ the thumbhole rear end one of these days!
I miss my AT with thumbholes also, but when I had the AX and AT, the AT never got shot
Would be the same I’m sure for me lol. For future reference, anyone know if any of the Mk guns be converted to thumbhole? Since this is a picture thread this is my old poor mans AI lol
Any idea where to find these AI stickers?
26” Win Tactical 6BR barreled ordered and will here Wednesday
26” Win Tactical 6BR barreled ordered and will here Wednesday
Laser engraved for the team AI guysAny idea where to find these AI stickers?
View attachment 7132389
26” Win Tactical 6BR barreled ordered and will here Wednesday
Any idea where to find these AI stickers?
View attachment 7132389
26” Win Tactical 6BR barreled ordered and will here Wednesday
The same place you get these ?
A good day at Quantico at 1000 with the AI/AX with Proof CF barrel in .260. A 2/3 IPSC and milk jug steel.
Gen3xr & AI make a great combo. The tool less turrets are awesome when you have 5 barrels.
(That’s how hot it is down here. Need a mask to save me from the sun ?)
(That’s how hot it is down here. Need a mask to save me from the sun ?)
Understood judging by the sweat marks you must have been miserable lol
Regular day in August here is 107 with 115+ heat index and 60% humidity.
I used to tell people South Texas doesn’t have an off season for shooting. But I have come to the conclusion that it’s June/July/August.
Say someone was thinking of picking up an AXMC in the spring, would the price difference to the coming AXSR be worth it from looking at the spec sheet?
Looking at 300 win mag and 338 lapua. Short 300 win mag barrel, probably a proof 16.5" cf.
Then I’d have to say no it’s not worth it. IMHO the ASXR is only worth it if you’re wanting plug and play with all the calibers long and short and not have to mess with finding extra SFP bolts or sending some out to get bushed. I don’t see any of the other “improvements” as real improvement. They made that rifle based on meeting certain criteria for a contract and not necessarily improvements from a prior design. But that’s just one mans opinion. I think snagging an AXMC at the cheaper price is for sure a good deal. I just wish where I lived I could justify one!
That depends on how tall you stack you gold florins yo....
The asr is like 20k with all 3 conversion I believe from Europtic not sure what the rifle and one caliber will go for when released but I would guess 12k. The bolt design is slightly different but I doubt the feel is a whole lot different than the axmc. I think the big difference is you get to swap any pistol grip you want for the ASR vs the axmc grip which you either love or live with. Obviously the rail is different but that is hardly a big deal. Trigger is the same, and rear buttstock is essentially the same.
If you can get an axmc in the 6k range with multiple calibers ready to go that is a hard deal to pass up. I love my axmc.
The guy to ask is probably @AIAW as he has them all I bet
. I could be wrong but I think the asr did away with the mag conversions too but you are still using multiple bolt faces @trob_205 FYI
For sure on different bolt faces I’m just speaking to already all SFP bolts.That depends on how tall you stack you gold florins yo....
The asr is like 20k with all 3 conversion I believe from Europtic not sure what the rifle and one caliber will go for when released but I would guess 12k. The bolt design is slightly different but I doubt the feel is a whole lot different than the axmc. I think the big difference is you get to swap any pistol grip you want for the ASR vs the axmc grip which you either love or live with. Obviously the rail is different but that is hardly a big deal. Trigger is the same, and rear buttstock is essentially the same.
If you can get an axmc in the 6k range with multiple calibers ready to go that is a hard deal to pass up. I love my axmc.
The guy to ask is probably @AIAW as he has them all I bet
That depends on how tall you stack you gold florins yo....
The asr is like 20k with all 3 conversion I believe from Europtic not sure what the rifle and one caliber will go for when released but I would guess 12k. The bolt design is slightly different but I doubt the feel is a whole lot different than the axmc. I think the big difference is you get to swap any pistol grip you want for the ASR vs the axmc grip which you either love or live with. Obviously the rail is different but that is hardly a big deal. Trigger is the same, and rear buttstock is essentially the same.
If you can get an axmc in the 6k range with multiple calibers ready to go that is a hard deal to pass up. I love my axmc.
The guy to ask is probably @AIAW as he has them all I bet
Thought the trigger was different? But I haven’t put hands on one.
P
Could have swore in a shot show YouTube video someone said it was the comp trigger standard in it your favorite.
I'll see if I can find it now but I could be totally mistaken now. In one of the pics in the ASR thread you can see the trigger kind of close up and it certainly looks like the comp trigger hanging down
Could have swore in a shot show YouTube video someone said it was the comp trigger standard in it
your favorite.I'll see if I can find it now but I could be totally mistaken now. In one of the pics in the ASR thread you can see the trigger kind of close up and it certainly looks like the comp trigger hanging down
@Huskydriver Mile High has the AXSR rifle listed at $8975 for pre-order. I’m assuming that comes with the bolt and one barrel but I can’t say for sure.
Interesting...no 308 family option either just 300 win and 338lm family bolt faces
@Huskydriver ASR kits doesn't come witha .300WM bolt. No bolt parts or mags (308) part numbers for them to order as of yet, alone. And yes, the ASR Kits will come with Comp trigger which I'm going to toss out.
I think the AXSR will come with comp triggers as well. If so, I'm tossing those bitches out too. Key slot forend is a plus though
To those that for whatever reason, want to toss them out of OG chassis, it's not bonded anymore on the ASR/ AXSR. So you can put it on an MPA etc if you'd like.
@jtackmann gotta ask yourself if the $3k price difference in the AXMC to AXSR worth it to you. The AXMC value will only drop more once the SR's are readily available. Which probably looking at early 2020. Since the ASR Kits aren't done yet
I think the AXSR will come with comp triggers as well. If so, I'm tossing those bitches out too. Key slot forend is a plus though
To those that for whatever reason, want to toss them out of OG chassis, it's not bonded anymore on the ASR/ AXSR. So you can put it on an MPA etc if you'd like.
@jtackmann gotta ask yourself if the $3k price difference in the AXMC to AXSR worth it to you. The AXMC value will only drop more once the SR's are readily available. Which probably looking at early 2020. Since the ASR Kits aren't done yet
Are they just running a 338LM bolt face then for everything?
Thanks for clarifying the trigger I could have swore that's what I heard.
@Huskydriver 308 and 338 bolts. Since it's coming with 308Win, 300NM and 338NM Barrels.
And I want to run a 300PRC on it instead....... FML
And I want to run a 300PRC on it instead....... FML
I'm running a 300 Norma right now but my experience with it is leading me towards a 300 prc in the future as well.
Do tell... please... was hoping my newly acquired 300 Norma was gonna make all my ELR dreams come true.
Lol and it will I'm sure. Mine hammers at a mile. I have 2 cold bore first round hits at a mile with my 300 Norma actually.
I have both 300 wm and 300 Norma barrels and routinely shoot them back to back on my axmc.
Ymmv but I am just not seeing the speeds other guys are claiming to make it worth it to me. From 215 gr bullets to 230s I'm a good 50-75fps slower than most guys are claiming with the same barrel length. I admittingly have only tried h1000 and retumbo powders however. I also only have a 26" tube.
For the powder charge to speed payoff I'm seeing major diminishing returns on the jump from 300 wm to 300 Norma vs just silinging a 300 gr smk from my 338lm for a given amount of powder charge.
Obviously the 300 Norma is seriously overbored and not as efficient as the 300 prc is on paper. I'm thinking the non belted brass of 300 prc and more efficient design might be worth it over the 300 wm i though if I get close to the speeds I'm seeing from guys right now with 300 prc vs my 300 Norma.
Again it's probably just my barrel and ymmwv.
Yeah. Based off the the Nightforce ELR Matches, '16 & '17 was won with a 300NM and Factory ammo. But that was Matt Brousseau and John Pynch lol. I forgot what cal won it last year. This year was a 6.5mm Magnum based. From what I saw in person from '17 - '19, guys are moving away from 300NM. Guys are going fro a 6.5 magunm or 7mm now.
Maybe Lapua brass offering for 300NM will change that, who knows.
There was a quite of bit of people shooting 300PRC with Factory Ammo and placing real well. I am waiting to see if ADG will make brass for it before I commit
This year was unique, in a sense that it was unlimited in caliber, bullet and muzzle velocity. I will say this though, dudes pushing wildcat 338 and 375's got raped... LOL. I talked to one guy shooting a 375 CheyTac, dude said he had to shoot from 7-10x out of his NF 7-35x hahaha.
Ranges was from 600 - 2100y. 2 rounds per target. All field prone.
I want another option to run a heavier caliber there besides 6.5PRC. Winds where mild this year, but we got bent over and F* last year...... used tears as lube basically with 8-40mph winds.... @hic28 can attest to it. over a dozen guys didn't show up for Day 2 *cough cough dasher shooters
Team AI guys where running 338NM in AXMC's. Scott Sigmund was running a 338LM out of the ASR. They had a loner ASR which was given to a female on Day2. She prolly got a reality check with her 338SnipeTac after Day1. I forgot what caliber Lance was running out of the AWSM
Would the shift to a new rifle system in the AXSR for AI cause parts for the AXMC to become scarce? I'm hoping to have all 3 bolts within the year so that I can go to whatever caliber. Being the noob that I am, will the barrels have a chance of being interchangeable between the two systems (making the fear of having to hunt for barrels in the future lower)?
1) I have asked this question on a few occasion and as recent as 1 month ago. The answer is yes, the thread pattern is the same, however, the barrel locking mechanism is different, and thus the AI distributors said the safe route is to hold off on barrel for the moment.. Pretty sure barrel blanks are safe
1.) The threads are the same. The bolt heads are different. Not interchangeable between the two systems.
2.) Yes, some of the AI guys are using the MLOK forend on their AX's. So I'm guessing they will be. But I wouldn't hold my breath on it.. Will be a good while before we see them.
If I'm not mistaken, the NF elr match was won this year by a .408 or .416 and 2nd was a .25 SAUM 131 Blackjack
Nope. Tied for 1st was guys in the Hunter class. One shot a 6.5SAUM, other was a 6.5-06.
Mitch with AB got 3rd overall. And 1st in Open class with a 338 Enabler
Fourth overal and 2nd Open shot 25SAUM
Here's the FB link of Top10 Guys
Heads up to all you guys with builds in post-14’ AX-AICS chassis systems, I’m finalizing the prints for the new “low” cheek piece. I already have one for the factory AX buttstock (which is the one used on the AT/AX swap), but I initially didn’t account for the differences between the two versions, hence needing to tweak the design for the AICS buttstock.
This will get the cheek piece approximately 0.350” lower, facilitating a lower, more comfortable head position when using low rings on your R700, Vudoo, etc builds.
The AX version is already available, and the AICS model will be available soon. Both from Anarchy Outdoors.
Sam
This will get the cheek piece approximately 0.350” lower, facilitating a lower, more comfortable head position when using low rings on your R700, Vudoo, etc builds.
The AX version is already available, and the AICS model will be available soon. Both from Anarchy Outdoors.
Sam
