-
Having trouble using the site?
Contact support
I’ll have to post pics, I know….
I am now the owner of my first AI; a 2014 AT folder I got from MH in 308 that came with a case, 260 Bartlein barrel, and Harris bipod.
The few times I’ve handled it since getting it from the shop today…as I said to my wife “I should have bought one of these a long time ago”.
Will post pics when I can.
I am now the owner of my first AI; a 2014 AT folder I got from MH in 308 that came with a case, 260 Bartlein barrel, and Harris bipod.
The few times I’ve handled it since getting it from the shop today…as I said to my wife “I should have bought one of these a long time ago”.
Will post pics when I can.
I said the same. Bought many other rifles not wanting to justify the $$ for AI. Once I handled the AI I wished I’d bought one long ago. Would have saved $ in the long run.
I l
I looked at buying that one. Would have worked for me since I shoot 260 alot.....do you shoot 260?
I just got a bunch of 260 ammo so looks like I’m fixing to start lol.I l
I looked at buying that one. Would have worked for me since I shoot 260 alot.....do you shoot 260?
We must be related lol. We’ve talked a few times about this, and I finally sold and saved enough to eat the cost of this and it was a very, very wise decision.
Now I’m gonna be a poor and use my Bushnell DMR3 with it until I can step up to a S&B or ZCO.
Welcome to the neighborhood guys. Other folks won’t understand what we “pay to play” or why. But once you know, you know.
, i new your description sounded familiar. 
I ordered a 338 Ultra SR last summer direct from TBAC. It shipped to my dealer in February. I just checked the serial (it's currently in jail) and the one I am getting is a Gen 2.
I am pleased
Here she is. My EDC P07 is making an appearance too. I need to get my DMR3 mounted and find a day to sneak off to the range.
Edit to add: going to find someone local to thread this barrel for my can as well.
Possibly a demo rifle?
I wouldn't expect any of those from a brand new rifle unless it was a demo. Every hinge (new and used) I've felt has been very stiff. My sample size though between myself a buddies is smaller compared to some here though.
If you got a deal on it I wouldn't sweat it but I'd be curious the round count on the barrel.
I wouldn't expect any of those from a brand new rifle unless it was a demo. Every hinge (new and used) I've felt has been very stiff. My sample size though between myself a buddies is smaller compared to some here though.
If you got a deal on it I wouldn't sweat it but I'd be curious the round count on the barrel.
Accuracy International - Thumbhole Grip Upgrade Kit
The Accuracy International thumb hole grip upgrade kits are available in fixed or folding and includes a thumbhole backstrap, rear end mouldings, and screws. For AT, will also fit AW and AWM. Fits new style stocksides only.
www.sportingservices.co.uk
Happy Easter
Some people were told they don't ship to the US when they called. I ordered a 3 or 4 months ago and had no problem. Came in about 2 weeks.
Just caught this on my computer, was looking at before from my phone.
I see what you've done here.. you introduced some Elite Sand magic with the magazine! No wonder it's feeding.
I see what you've done here.. you introduced some Elite Sand magic with the magazine! No wonder it's feeding.
And every Tom, Dick and Harry has been finger fu*king it... It's going to get marked up some.
The rubber does develop white looking powder on it. Which in this case could have been mixed with dirt from being on the display shelf.
White stuff on my new ATX, cropped from yesterdays range trip.
The rubber does develop white looking powder on it. Which in this case could have been mixed with dirt from being on the display shelf.
White stuff on my new ATX, cropped from yesterdays range trip.
I ordered online. Got mine in a little under 2 weeks as well. They definitely ship to the US, if the order is placed online.
Ken
Working on a 750gr A-Max load for the AX ELR
Man if they ever just let you buy one as a .375CT I would probably get one. I don’t want the .50 parts since I would hardly use them. But that is a shmexy rifle.
EDIT: Does your LabRadar work with that much vertical offset?! If so I need to try that with mine, I keep it at ground level and get more error messages than I’d like due to the muzzle brake gasses.
EDIT: Does your LabRadar work with that much vertical offset?! If so I need to try that with mine, I keep it at ground level and get more error messages than I’d like due to the muzzle brake gasses.
I use a Piet recoil trigger with that offset, picks up every shot and no errors after adjusting trigger sensitivity to 3.
Inertia trigger on Labradar is the way to go.
No perfectly aiming, or issues with microphone picking up. Just point at target and shoot.
No perfectly aiming, or issues with microphone picking up. Just point at target and shoot.
Another recoil trigger user here. No dropped shots and I also use trigger sensitivity level 3.
Too easy
Too easy
Saturday was the worst possible rain to shoot in. Wind, rain, and fog. 1150 yard targets completely obscured. Did manage to get 2 impacts at 1260.
Also, you can order a 25ft 3mm cable and plug into the trigger.
Log velocity while practicing off barricade.
Log velocity while practicing off barricade.
Shot a match Saturday with the AX/AO. Placed 11/29. Pierced one primer during sight in but I think it was due to excessive head spacing on some 1x fired brass I had bought. Other than that one hiccup it was flawless.
Back in the backOf a Cadillac
Number one with a bullet, I'm a power pack
Yes, I'm in a bang
With a gang
They've got to catch me if they want me to hang
'Cause I'm back on the track
And I'm beatin' the flack
Consider yourself educated lol
I could see you using it as a podcast roll in intro beat lol
Okay…not to derail the thread any further buttttt
For my new AT, if I was looking at a 4-16x42 ATACR, the 7-35, or a 5-25PM2 which would you go with?
For my new AT, if I was looking at a 4-16x42 ATACR, the 7-35, or a 5-25PM2 which would you go with?
Um Alex that would be , what is a ZCO 527
If you are happy with low magnification, the only correct answer is the s&b 3-12x50 pmii. That scope is magical.
Honestly it's reticle choice. Pick your reticle then go.
I own the 4-16 and the 7-35. The 4-16 is nice for a short distance setup or gas guns, but I am partial to the 7-35 for longer range stuff even though I vary rarely get above 15 for any actual shooting.
It's about the perfect scope for a shorter barrel AI. Recently got rid of mine since I'm going with longer barrel setups. The 3-12x50 PMII punches well above it's weight.
I commented on your ATACR thread with my AT/NF combo. 4-16X42. But I’ll be more specific
This gun is primarily used as a hunting gun. Crop damage to be exact. It’s on a 308 20” barrel. Primary use being shooting deer inside 500 yards. It’s perfect for that and 4X is useful for close range in low light
My AXMC wears a 7-35 ATACR. I haven’t had a chance to hunt with that yet.
That said I have been left wanting more magnification to ID deer (antlers) at the 400+ yard ranges. As what I shoot needs to be does.
I have used many other higher mag scopes like Athlon Cronus BTR 4.5-29 and deem this a good magnification range for all around shooting
So moral of my story is I like 4X on low end for low light and being this is a primary hunting rifle it works out very well. If I was hunting longer ranges or target shooting 800+ yards I’d opt for the 7-35. I rarely shoot my higher power scopes near max magnification. I will when load testing or identifying at long ranges
Keep in mind there’s a decent size difference between the two. If that matters to you. I’ve posted the pic before but here’s the two in comparison for size. The AX is about 12” behind the AT in this pic. Low profile/locking elevation turret on the 4-16 is nice as well for my application
Similar threads
