Accuracy International Picture Thread

[TylerN]

I forgot where I read this existed, but I figured I'd ask before dusting off the hand drill...

Which company was it that offers the RRS ARC hole service for the AXSR RRS forend? AKA Which company is drilling holes in the bottom of the AXSR forend for the ARC system?

...or was I hallucinating again?

@Fred @ Bison Tactical drilled his AT-X I believe, he might offer that service.

 

[M8541Reaper]

@Fred @ Bison Tactical drilled his AT-X I believe, he might offer that service.

Ah ok. Thanks

 

[Huskydriver]

View attachment 7982702

Moa scope? Surely you jest sir.....

 

[hic28]

I forgot where I read this existed, but I figured I'd ask before dusting off the hand drill...

Which company was it that offers the RRS ARC hole service for the AXSR RRS forend? AKA Which company is drilling holes in the bottom of the AXSR forend for the ARC system?

...or was I hallucinating again?

Matt at sawtooth

 

[Krob95]

I am better than all of you now. Sold my AI and now am rocking the Savage

 

[Huskydriver]

I am better than all of you now. Sold my AI and now am rocking the Savage View attachment 7987379

#justasgood

 

[Defender3]

I am better than all of you now. Sold my AI and now am rocking the Savage View attachment 7987379

April 1st comes early...

 

[Krob95]

April 1st comes early...

No my AI is legit sold. Received payment yesterday.

However. I am buying an ATX to replace it on Friday

 

[Huskydriver]

No my AI is legit sold. Received payment yesterday.

However. I am buying an ATX to replace it on Friday

 

[Krob95]

View attachment 7987388

I know you are but what am I

 

[Rhed]

Moa scope? Surely you jest sir.....

Yea I just grew up with it since I was a kid hunting. Never got around to making the switch. Though it gets the impacts done at so that’s all that matters. What about you, your AO chassis making you shoot better?

 

[Huskydriver]

Yea I just grew up with it since I was a kid hunting. Never got around to making the switch. Though it gets the impacts done at so that’s all that matters. What about you, your AO chassis making you shoot better?

 

[carbonbased]

I am better than all of you now. Sold my AI and now am rocking the Savage View attachment 7987379

Elite (Sand) Savage Master Race?

 

[carbonbased]

I am better than all of you now. Sold my AI and now am rocking the Savage View attachment 7987379

That Spuhr may be worth more than the entire rifle. Don’t think I’ve ever seen that combo before!

And I laughed at the tenuous mounting solution lol

Gonna miss seeing ol’ Elite Sand AX around here. Is the new ATX also the Sand of the Elite?

 

[Krob95]

Me too. Hopefully the new owner will post some photos of it periodically lol

The ATX is not elite sand. It is actually black multi cam.

 

[Jefe's Dope]

Me too. Hopefully the new owner will post some photos of it periodically lol

The ATX is not elite sand. It is actually black multi cam.

View attachment 7987463

Is this the actual rifle? Or just representative of what you're getting?

 

[Krob95]

No. It's the real thing. Buying Fritz's ATX.

 

[TheBigCountry]

No. It's the real thing. Buying Fritz's ATX.

All it needs now is a Vortex Razor.

 

[Krob95]

Looking to trade coyote anodized tangent for a 4.5-27 razor lmao

 

[TheBigCountry]

Looking to trade coyote anodized tangent for a 4.5-27 razor lmao

You poor. This is such blasphemy. I can’t even.

Why? (I have a 4.5-27 lol….)

 

[Krob95]

You poor. This is such blasphemy. I can’t even.

Why? (I have a 4.5-27 lol….)

I can odd if you can't even lmao this a joke tho. Keeping the mf tangent lol

 

[TheBigCountry]

I can odd if you can't even lmao this a joke tho. Keeping the mf tangent lol

You could go all out and rock a Valdada. Or CounterSniper.

 

[Jefe's Dope]

No. It's the real thing. Buying Fritz's ATX.

That thing is sweeeeet!

 

[Nik H]

Yup, $50 on an AI is a drop in the ocean as said already.
The thumbrest is awesome. It’s functional as the thumb is at readiness to lever/ cycle the bolt. It also seems to be a natural position for me and clearly many others.
I can’t reconcile why AI didn’t make provision for them on the new models…
I also enjoy the retro thumbhole stocks so I’ve the best of both worlds.

Do you or anyone else that uses the thumb rest miss the fact that you no longer have the retention feature for the butt stock when folded?

 

[800mZero]

So I shot my Ax with its AI 26” bartlein barrel today.

Only had access to FGMM 130 gr bergers, and some 140 gr match.

Rifle didn’t want to seem to shoot much better than an inch with these two loads…..

is the hornady match that much better of a loading?

I was expecting 1/2 moa, not barely 1 moa.

What’s your guys experiences with the fgmm loadings?

 

[Krob95]

Do you or anyone else that uses the thumb rest miss the fact that you no longer have the retention feature for the butt stock when folded?

I did not miss the retention feature on my AX. But I only folded the buttstock to clean the barrel.

 

[Maciej]

So I shot my Ax with its AI 26” bartlein barrel today.

Only had access to FGMM 130 gr bergers, and some 140 gr match.

Rifle didn’t want to seem to shoot much better than an inch with these two loads…..

is the hornady match that much better of a loading?

I was expecting 1/2 moa, not barely 1 moa.

What’s your guys experiences with the fgmm loadings?

I can tell you that just shooting factory Hornady 140gr ELD I've been consistently getting less than 0.5MOA, so something definitely seems off.

 

[Nik H]

So I shot my Ax with its AI 26” bartlein barrel today.

Only had access to FGMM 130 gr bergers, and some 140 gr match.

Rifle didn’t want to seem to shoot much better than an inch with these two loads…..

is the hornady match that much better of a loading?

I was expecting 1/2 moa, not barely 1 moa.

What’s your guys experiences with the fgmm loadings?

I ordered a couple of boxes of the FGMM with the 130 grain Bergers. Should be here next week. I have shot the Berger made cartridge with the 130 several times with great (<0.5 MOA) success. Hornady 140 ELDM is my go to as it always shoots great.

 

[5RWill]

Me too. Hopefully the new owner will post some photos of it periodically lol

The ATX is not elite sand. It is actually black multi cam.

View attachment 7987463

That is gorgeous who did the pain job?

 

[800mZero]

Were you using an 800m zero when you shot it?

I wasn’t supposed to?

Nope 100 yards.

 

[Krob95]

That is gorgeous who did the pain job?

I am unsure of his name. I do know it's the guy he uses for all his cerakote work that's local to him in Denver.

 

[Rhed]

Me too. Hopefully the new owner will post some photos of it periodically lol

The ATX is not elite sand. It is actually black multi cam.

View attachment 7987463

That’s hardcore right there! Keeping it real..

 

[Anzac]

Do you or anyone else that uses the thumb rest miss the fact that you no longer have the retention feature for the butt stock when folded?

My “retro”, retrofit of the plastic Thumbhole stock folds left so I still have a capturing folder if I choose to use it.
Having said that, I also just use the folder to clean including on my Vision AT+AX buttstock that has lost the retainer to the thumbrest. Don’t miss it.

 

[Huskydriver]

Me too. Hopefully the new owner will post some photos of it periodically lol

The ATX is not elite sand. It is actually black multi cam.

View attachment 7987463

You cut your hair off too?

 

[Krob95]

You cut your hair off too?

No sir, it's still long af and permed

 

[Huskydriver]

No sir, it's still long af and permed

Mines getting there.... Match in sep

 

[Krob95]

Got the long hair with the mf Jesus sandals, peak AI shooter right there

As the young folks (me) say, you have all the drip

 

[Huskydriver]

Got the long hair with the mf Jesus sandals, peak AI shooter right there

As the young folks (me) say, you have all the drip

Love those bedrock sandels...
#vibramsoles
#getagrip
#flipflopsnshortsallyear

 

[BuLLet]

At least he's not wearing socks with those sandals!

And they still beat these:

Got the long hair with the mf Jesus sandals, peak AI shooter right there

As the young folks (me) say, you have all the drip

 

[Huskydriver]

At least he's not wearing socks with those sandals!

And they still beat these:

View attachment 7987638

@zerolumens you going to take that?

 

[Krob95]

Yo, crocs are my mf jam, but I have since grown up and rock the dudes everywhere

 

[96C]

How you finding the Hardy barrel?
I'm guessing you didn't have to send your rifle from Aus to NZ to get it fitted? They just did it as a prefit?

Have only fired 200 rounds through it so far (fire forming virgin lapua) but, it did put out a 10 shot 0.45 MOA group at 100m with 108gr ELDM and zero load development... It was 'prefit' by APRS (a reputable gunsmith) down here in Australia based off one of their shop AI AT's.

The 6BR is a 2023 project, hoping to get that going as the go-to PRS barrel.

 

[J-Ham]

Do you or anyone else that uses the thumb rest miss the fact that you no longer have the retention feature for the butt stock when folded?

As others have stated, I also only fold mine for cleaning. That being said, in my experience the AI folding mechanism is so tight that I'd say the retention 'feature' is pretty unnecessary anyway.

 

[JonKleman]

Stolen from instagram

 

[wizardpc]

Stolen from instagramView attachment 7987733

I'm in this picture and I don't like it.

 

[Bacarrat]

I'm 2 out of 4, not bad.

 

[Fred @ Bison Tactical]

@Fred @ Bison Tactical drilled his AT-X I believe, he might offer that service.

Yes, we offer it as a service (no psychedelics involved - though we are based in Boulder, CO)...

I believe this was what your thinking about?

SOAR R-LOCK Conversion - Convert your AT-X or Chassis

Click here to buy our SOAR R-LOCK conversion to convert your AT-X Rifle or aluminum chassis to use RRS SOAR R-LOCK indexing

www.bisontactical.com

 

[SAS_Sniper]

After 10 months i finally finished my L115A3 clone... Scope mount with Simrad rail and thermal mount was very hard to find..but a friend from SBS helped me....i love it....xD

 

[Krob95]

She's home

#foldergang
#justasgud

 

[carbonbased]

View attachment 7990055

She's home

#foldergang
#justasgud

“Black Multicam Master Race” lulz