Buying an AI is meaningless without the Logo as your Avatar!
My avatar is a BBQ sandwich. What does that mean?
My avatar is a BBQ sandwich. What does that mean?
That means you really like BBQ (your tagline even says so). And you know what, I am in agreement with you.
This kind of ribbing reminds me of my buddy that said his custom 700 action was way better than my AI...then the wind blew a little dirt into his action and it locked up.
My response? "Go be a poor, somewhere else."
My response? "Go be a poor, somewhere else."
kreiger 30” 1:8 6.5prc - 1.35 at the shank and 1.25 at the muzzle. Cut by Matt Yore at sawtooth rifles.
Fuckin love it. I also have the sawtooth rails on my manners t6a. Honestly though, most of the rails all work the same, as long as they are the RRS dovetail cut. The difference comes in the support behind them and I can’t say enough good things about Matt. The customer service is top notch and he will bend over backwards to make sure everything is the way you want it.
Barrel weight blank
Speaking of barrels Look what ups just dropped of from mile high for my axmc...
Here are my Faithful 2013 model AX’s.
One is 338LM factory barrel 27”.
The other is a 308 win 20” AINA
?
One is 338LM factory barrel 27”.
The other is a 308 win 20” AINA
?
He has to now. Cause he'll be carrying my rifles as well which are spec'd the same
Strange, haven't seen any of those rifles at my local monthly matches down there at Pala. We may need to change that
FYI: Mile High Shooting has the 30 caliber, 1/9 twist barrel blanks in stock. Fritz called to confirm an order I placed for my AI AXMC in 300 Win Mag.
Last edited:
Call Mile High, it will depend on what you want done - 1-877-871-9990.
I am a weak weak man, I caved and picked up a EuroOptic range demo sage green AX.
Accuracy International AXMC Black .300 Win. Mag. 20" LH Rifle std brake A-XM300WMBL20SM-LH
Accuracy International AXMC 300 Black chassis 20 inch barrel std brake - Left Hand A-XM300WMBL20SM-LH | Only at EuroOptic.com!
We ripped an AT apart a couple of weeks ago for one of the lads when his MPA stock finally arrived, had to cut out a heap of stock near the trigger hanger to make it fit, definitely not a drop in stock. Took the best part of 10 months to arrive...
Really nice finish though, the green looks excellent and the vertical grip angle on the MPA has definitely grown on me a lot. Pretty serious rifle with the AT action in it!
(AI AT: 20" 308 with AI tactical brake & AX308: 24" 6.5CM with Area419 Sidewinder brake)
Really nice finish though, the green looks excellent and the vertical grip angle on the MPA has definitely grown on me a lot. Pretty serious rifle with the AT action in it!
(AI AT: 20" 308 with AI tactical brake & AX308: 24" 6.5CM with Area419 Sidewinder brake)
We ripped an AT apart a couple of weeks ago for one of the lads when his MPA stock finally arrived, had to cut out a heap of stock near the trigger hanger to make it fit, definitely not a drop in stock. Took the best part of 10 months to arrive...
Really nice finish though, the green looks excellent and the vertical grip angle on the MPA has definitely grown on me a lot. Pretty serious rifle with the AT action in it!
(AI AT: 20" 308 with AI tactical brake & AX308: 24" 6.5CM with Area419 Sidewinder brake)
View attachment 7057283
Either something was machined wrong or you need some shorter front action screws on that AT-MPA!
That's too bad.
I can assure you the chassis I designed will have all the proper length screws!
That's too bad.
I can assure you the chassis I designed will have all the proper length screws!
Lol. Lmk when you need my shipping address.
I like your aggressive style lol.
I'm still planning on getting a small run made, still waiting on final numbers from the machine shop with all the accessories (weight kit, spigot, NV bridge). I will need some to be tested if people are willing. Unfortunately with the cost of the prototypes I don't think I can afford to give them away once the testing is complete, but would probably be willing to sell them at a discount of what a production version would sell for.
So... That's where it went...Nice pickup! I ended up with my backup choice: the pale brown range demo ?
Guys, I’m going to pick up a NF 7-35. I know the AXMC already has 30 MOA built in the rail, how much if any, cant are you putting in the Spuhr? Currently and for awhile in the future I’ll be shooting 260(God’s caliber), and 338LM. I must be able to zero both at 100yds.
10 MOA (put you at 40 MOA total). SP-4302 is what I use specifically.
Enjoy my cancelled backorder! If I was keeping my AT I would have taken them.
Baby poop brown > peanut butter
It’s proven that green spuhr vials make for 5% more accuracy over their clear counterparts
Enjoy my cancelled backorder! If I was keeping my AT I would have taken them.
Baby poop brown > peanut butter
Thanks again for hooking me up. And yes, baby shit > peanut butter
Is the base plate/pad on the bottom of your AXMC magazine bolted on? Wondering how it's attached. I see those mags are available to purchase on MH, but I haven't seen one in person.
Sam, the AXMC mag baseplates are similar to an AR Pmag, they slide over receiving flanges on the bottom of the mag body and are retained by the spring & follower.
Last edited:
Wow, ok, I didn't realize any AI mags didn't have welded base plates on them.
Based on the pictures, I'm assuming it's polymer?
It's interesting, now looking at the ASR pics, it appears the 308 magazine has the detachable base pad, where the norma mag magazines are welded.
