Accuracy International Picture Thread

[MACHTECH]

I have a MKIII that has the more AT style skins and was looking to change the skins out to the earlier MKIII/MKII style skins and was wondering if anyone knew a good source for something like that?

Try Mile High. Mike found me a set of dark earth skins for one of my AW's. They are getting scarce though!

Oh.... and maybe try Tac Pro Shooting in Mingus, TX. He has a lot of extra parts in the back room still I believe.

 

[jdnoble]

Bring your ASR to the office day!

 

[BuLLet]

Some more Elite Sand action at the sand pit. AX50 and AXSR 300WM

Dialed the 50 in a bit more, my son is really liking it!

My 50 group, 200 yards and just a quick loading of 750 Grain Amax

 

[Defender3]

More stuff arrived today, including a 27" 300 PRC barrel by Dave Tooley. Hopefully I can get the new AXMC out soon.

Anyone using a SOCOM 7.62-RC on a 300 PRC or 300WM? Thoughts? TIA.

 

[BuLLet]

Looking good, now get some loads worked up and let us know how it goes!

Is Dave putting flats on the barrel? Looks like something near the muzzle.

More stuff arrived today, including a 27" 300 PRC barrel by Dave Tooley. Hopefully I can get the new AXMC out soon.

Anyone using a SOCOM 7.62-RC on a 300 PRC or 300WM? Thoughts? TIA.

 

[Defender3]

Looking good, now get some loads worked up and let us know how it goes!

Is Dave putting flats on the barrel? Looks like something near the muzzle.

I'm going to catalog the first 100-120rds through the barrel as it speeds up using factory H225s. I'll develop a load using N565 and RL26 for the 220 Bergers and H225s.

Cut with 6 flats.

 

[Glassaholic]

Nice, is that from Tooley?

 

[Surly]

Some more Elite Sand action at the sand pit. AX50 and AXSR 300WM

Dialed the 50 in a bit more, my son is really liking it!

View attachment 7432730

View attachment 7432732

View attachment 7432733

View attachment 7432735

My 50 group, 200 yards and just a quick loading of 750 Grain Amax

View attachment 7432737

Nice shooting! I’m guessing you like elite sand over the fde?

 

[BuLLet]

I'm fluid with the colors.... but the es is shooting great.

Nice shooting! I’m guessing you like elite sand over the fde?

 

[MACHTECH]

AI AT'ish
View attachment 7433440

AI AW'ish. Lol

 

[Luvman]

AI AW'ish. Lol
View attachment 7433731

Hey is that the new AT covert?

 

[MACHTECH]

Hey is that the new AT covert?

Why yes it is. And man is it quiet! I picked up some subsonic Lapua .308. All you hear is the firing pin striking the primer.

 

[mgrs]

More stuff arrived today, including a 27" 300 PRC barrel by Dave Tooley. Hopefully I can get the new AXMC out soon.

Anyone using a SOCOM 7.62-RC on a 300 PRC or 300WM? Thoughts? TIA.

SOCOM 300 on a 27" TRG .300wm. I bet the RC will have a sharper tone, but is a more durable suppressor than the 300. With a barrel that long, you could probably use most anything.

 

[Leatherlunger]

AI AW'ish. Lol
View attachment 7433731

 

[Plinked]

 

[FMJ]

AT, AX Butt stock, AO Chassis, GTAC grip conversion, makes for one fine rifle.

 

[J-Ham]

Just do what I did, reub...

Stop counting!!!

 

[FMJ]

I never add it up. To do so takes away from the fun in putting it together. What better way to spend your money making tools for liberty.

 

[Nik H]

I keep hearing that AI is not meant to be the most accurate rifle out there. They say that it isn't purpose built to deliver accuracy like a fully custom bolt gun....

I also hear that factory ammo can't compete.

Hmmmm.

This was one of yesterday's results while comparing different ammunition.

This was PRIME 6.5 CM out of my AI AT. It was the best group I shot but the others were all below 0.6MOA at 300 yards. Even the 5 shot groups.

You have to love AI

 

[samb300]

I keep hearing that AI is not meant to be the most accurate rifle out there. They say that it isn't purpose built to deliver accuracy like a fully custom bolt gun....

I also hear that factory ammo can't compete.

Hmmmm.

This was one of yesterday's results while comparing different ammunition.

View attachment 7434769

This was PRIME 6.5 CM out of my AI AT. It was the best group I shot but the others were all below 0.6MOA at 300 yards. Even the 5 shot groups.

You have to love AI

Who the hell says any of that??? I've never heard it, and never thought AI's were viewed as being inferior to customs in the accuracy department.

 

[Nik H]

Who the hell says any of that??? I've never heard it, and never thought AI's were viewed as being inferior to customs in the accuracy department.

I've heard it many times at a number of different places...forums...matches, etc. I never bought it but I have heard it here as well. Look at any of the threads dealing with "should I buy an AI over a blah blah custom". People always state a custom's precision is a reason to go that route.

I have 2 AIs and have never questioned the rifles potential for precision

 

[Nik H]

Oh boy....here we go....

Hopefully not as this is not my opinion but one I have heard others make. My photo was my rebuttal to that position.

 

[Movistar]

The only people who say that are the ones trying to convince themselves it’s true. Because they don’t have one.

I would say to them: it’s worth every penny.

 

[Nik H]

The only people who say that are the ones trying to convince themselves it’s true. Because they don’t have one.

I would say to them: it’s worth every penny.

I just smile a lot....

 

[Dave62677]

I had people came up to me saying ... that’s a nice Ruger. I just smile and said thanks.

 

[Sixfivesavage]

I really don't think accuracy is exclusive to a brand or in this case, a brand vs. all others.

I guess AI's claim to fame is that they do it Internationally....

Prestige worldwide

 

[NoLegs24]

@Nik H Uhm, an AI is a lot harder to shoot off your belly/ bench than a custom gun built for comps... ain't nothing wrong with admitting that. It's not going to make me switch.But I can see why guys favor other rifles vs AI's...

Maybe you should show them what's up at an actual match? Make them believers??

 

[Nik H]

@Nik H Uhm, an AI is a lot harder to shoot off your belly/ bench than a custom gun built for comps... ain't nothing wrong with admitting that. It's not going to make me switch.But I can see why guys favor other rifles vs AI's...

Maybe you should show them what's up at an actual match? Make them believers??

LOL...I am a non-competitive type. My mental game prevents me from competing in high pressure situations. So I just smile a lot.

 

[Takashi]

Shot a match this past weekend with my AT at Reveille, what a beautiful place!

 

[ChadL]

^ gorgeous

 

[jtackmann]

For anyone using a comp trigger, how often do you flush it with lighter fluid?

Sending mine in to AI and they guy on the phone thought it was crazy that flushing multiple times didn't fix my issue.

 

[96C]

For anyone using a comp trigger, how often do you flush it with lighter fluid?

Sending mine in to AI and they guy on the phone thought it was crazy that flushing multiple times didn't fix my issue.

Have never flushed it, 2,000+ rounds so far in dust, rain and dirt... Hasn't been an issue.

 

[RS14]

 

[Huskydriver]

Hey guys, I need someone with an AX short action rifle to do some fit tests on a couple of items I am printing, I already print items for the AXMC, and AT and they are being tested but need a volunteer to check fit and use the AX prints at the range. You'll get a new set to keep once everything fits and runs right, just need some feedback, disregard the AT on the test items, the originals were printed before I knew there was a difference between the AX and AT mags.
View attachment 7436532View attachment 7436533 Any Takers?

@Mr. F

 

[Chargerguy]

Whats the difference between the AX and AT .308 mags?

 

[Huskydriver]

I found out during a test fit that the AT mags do not have a front lug on them, therefore the AX mags will not fit in an AT rifle.

That's correct

 

[RS14]

I found out during a test fit that the AT mags do not have a front lug on them, therefore the AX mags will not fit in an AT rifle. Not sure if it will work the other way around though.

AT mags will work in a AX.

 

[Chargerguy]

I found out during a test fit that the AT mags do not have a front lug on them, therefore the AX mags will not fit in an AT rifle. Not sure if it will work the other way around though.

Good to know. I don’t have both and always figured they were the same. They do have different part numbers.

 

[goosed]

AT mags will work in a AX.

^ This

AT can't use AX mags...well it can, but only after you hammer in the front tap flush with the side of the mag.

While the AX can use either mag. You can feel the front lug on the AX mag lock into place, but both AT/AX mags still have the exact same amount of rattle movement and feed exactly the same (flawlessly) in my AX.

@pfl338 I don't see any real reason to make the AX specific version

 

[Defender3]

Hey guys, I need someone with an AX short action rifle to do some fit tests on a couple of items I am printing, I already print items for the AXMC, and AT and they are being tested but need a volunteer to check fit and use the AX prints at the range. You'll get a new set to keep once everything fits and runs right, just need some feedback, disregard the AT on the test items, the originals were printed before I knew there was a difference between the AX and AT mags.
View attachment 7436532View attachment 7436533 Any Takers?

Received mine and hope to have them out tomorrow for testing.

 

[Defender3]

Did you install the mag release paddle? I am curious as to AI's consistency between rifles, as far as production goes.

I did put it on my MC, snug fit, but that's a good thing. Recommend ridges on both sides.

 

[Defender3]

I'm talking outside. Wet plastic with no grip surface could be less bueno.

 

[BuLLet]

I've a few AI's, well more then a few... and willing to test out some of your gear if you're needing guinea pigs.

View attachment 7437739Here is the prototype bag rider, the machined one i made out of 7075, that works fantastic, the printed one( installed on rifle) will need some more mods for it to become viable, but I think I can get there and be able to provide an economical bag rider that functions well and is fairly durable, I will require test beds, (AKA volunteers to abuse the crap out of it to see how durable it will be be.) super light compared to the all Aluminum one.​

 

[lethalsquirts]

Pimpin ain’t easy!
Trying for 2 miles with a 33XC.

 

[MACHTECH]

View attachment 7437825
Pimpin ain’t easy!
Trying for 2 miles with a 33XC.

Yes it is! Lol. The 33xc has been impressive all day!

And we had some visitors tonight.

 

[Dave62677]

Yes it is! Lol. The 33xc has been impressive all

what is your load if you If you don’t mind sharing? My 33xc bbl will be here in 3 weeks.

 

[MACHTECH]

what is your load if you If you don’t mind sharing? My 33xc bbl will be here in 3 weeks.

Peterson brass
Berger 300 grain hybrid seated at the lands
GM 215M primer
123 grains H50BMG
3150 fps

 

[khymiller2]

Yes it is! Lol. The 33xc has been impressive all day!
View attachment 7437828
View attachment 7437829

And we had some visitors tonight.
View attachment 7437831

She is beautiful.

 

[MK20]

Does anyone here know what height rings are needed when mounting a scope on a AI AT high 20 MOA rail?

 

[Defender3]

I got a chance to hit Quantico today to start breaking in the 300 PRC. I got 70rds down the new barrel and will be able to develop a drop chart and take the rifle to 1,000 tomorrow.

I tested the 3-D printed lead sled, safety block and extended mag release for fit and function, absolutely no issues. I also chrono'd each shot so I can track and plot the barrel's speed. I shot factory Hornady 225s (60rds) and 10rds of the Unknown Munitions 220 Bergers over some IMR 7977.

I wasn't necessarily shooting for groups but here are shots 16-20 of the Hornady, I think this Dave Tooley 27" barrel is a shooter as long as I do my part. Speed for the Hornady today was in the 2850 range, but given it was factory, there were some wild variances.