Accuracy International Picture Thread

[Sniperwannabee]

Fortunately I’m not Oregon resident were I have no say in the shenanigans going on here.... I will say Oregon is the worst run state I ever lived in on the other hand the best place I lived due to just the beauty of the outdoors and access to to Public land were you can shoot as far as you want... with trees

 

[Movistar]

We should organize an AIs of the West party in Southern ID and get the OR WA WY UT CO NV MT rifles all together. CA folks welcome to come try some suppressors haha.

 

[Huskydriver]

We should organize an AIs of the West party in Southern ID and get the OR WA WY UT CO NV MT rifles all together. CA folks welcome to come try some suppressors haha.

Told you to come on down and AI party anytime

 

[Sniperwannabee]

We should organize an AIs of the West party in Southern ID and get the OR WA WY UT CO NV MT rifles all together. CA folks welcome to come try some suppressors haha.

ID is on my short list on places to move/retire

 

[craigos]

I just bought an ASR to go with my AX308. Should be here in a couple weeks - eager to get it. Will post pics

 

[NoLegs24]

We should organize an AIs of the West party in Southern ID and get the OR WA WY UT CO NV MT rifles all together. CA folks welcome to come try some suppressors haha.

I just caught a little gayness, reading this...

 

[Long Range 338]

We should organize an AIs of the West party in Southern ID and get the OR WA WY UT CO NV MT rifles all together. CA folks welcome to come try some suppressors haha.

Umm, just speaking for WY but you would have more people there then a busy day here! Not sure how you'll maintain proper social distancing. You might get some redneck on you.

 

[Movistar]

I just caught a little gayness, reading this...

well, I know Californians are a little different so if the idea of seeing lots of men with AI rifles makes you catch a few gay feelings... well maybe you can just keep that to yourself? I don’t know if I would be advertising those feelings man. I mean it is 2020 and the world is going to hell in a hand basket so... gay away. Just don’t expect me to participate or buy you a wedding gift

 

[Budrichard]

A flexfit cap is usually a good product, I have a few.
Porsche does not sell cheap stuff but apparently Mile High AI hats are an exception.
I wonder who made the Flexfit cap?
-Richard

 

[NoLegs24]

well, I know Californians are a little different so if the idea of seeing lots of men with AI rifles makes you catch a few gay feelings... well maybe you can just keep that to yourself? I don’t know if I would be advertising those feelings man. I mean it is 2020 and the world is going to hell in a hand basket so... gay away. Just don’t expect me to participate or buy you a wedding gift

 

[Movistar]

We gotta get this thread back on track

I’ll go first: close and far...

 

[Sniperwannabee]

Live pic yes those are s&b 140’s haha

 

[kocustoms]

 

[MACHTECH]

@lethalsquirts pounding the 3643 target repeatedly with my 33xc!

 

[Sniperwannabee]

you know your shooting farrrrrr when you got the thinga miggiggy in front of the scope

 

[Chasing3]

Finally found some green skins thanks to another Hide member for my AIAT shorty with the Kahles K318 MSR/Ki (floating center dot) reticle.

 

[Mr. F]

We gotta get this thread back on track

I’ll go first: close and far... Chucking pills with @Huskydriver

View attachment 7470049

Thanks for restoring sanity...

 

[lethalsquirts]

@lethalsquirts pounding the 3643 target repeatedly with my 33xc!
View attachment 7470172

AI makes the best rifles, hands down!

 

[Charger442]

Well it’s here. I have to say I’m totally disappointed. Its a cheap hat with an awesome AI logo embroidered. The hat is so shallow and doesnt fit anything like my Condor camo hat. I’m so let down. This is unwearable. My 10 year old boy will be happy to have it but that’s just going to make me salty every time I see him.

View attachment 7468887

i bought two from Mile High and they are, as you say, unwearable. ill also see if my wife will wear it because im tempted to send them back. 28 bucks a pop and very high shipping, i expected much better.

 

[TheBigCountry]

Rather silly question for the AI crowd. I have a custom 308 on a Bighorn. Any thing I would gain selling it for an AT? I haven’t had the Bighorn long, but I really like the looks of the AT.

 

[Huskydriver]

Rather silly question for the AI crowd. I have a custom 308 on a Bighorn. Any thing I would gain selling it for an AT? I haven’t had the Bighorn long, but I really like the looks of the AT.

Heavier bolt lift... I ran a tl3 for awhile it's a great action but I love the ai system better

 

[TheBigCountry]

Heavier bolt lift... I ran a tl3 for awhile it's a great action but I love the ai system better

Thank you. I think the biggest selling point will be getting my hands on one to do a side-by-side comparison.

 

[eo3x0]

Thank you. I think the biggest selling point will be getting my hands on one to do a side-by-side comparison.

If it's a matter of looks and not functionality, perhaps you'd entertain the idea of going with an AICS-AT chassis? Should work since Bighorn actions are 700 footprints. I posted a picture of my 700 dressed up (for looks) next to my AXMC here: https://www.snipershide.com/shootin...-picture-thread.6252614/page-113#post-8589793

 

[Cc2cuz]

@lethalsquirts pounding the 3643 target repeatedly with my 33xc!
View attachment 7470172

Where did you get that truck axle from? I mean barrel.

 

[ChadL]

Taking my AI into the field this morning. See if I can get it’s first blood. Opening day for deer season is today.

 

[MACHTECH]

Where did you get that truck axle from? I mean barrel.

Travis @TS Customs

 

[TheBigCountry]

It finally bit me. I’ve listed my rifle, maybe 1 or 2 more as well, and going to get an AT thanks to this thread.

 

[Btrain]

you know your shooting farrrrrr when you got the thinga miggiggy in front of the scope

What is that thingamajiggy?

 

[blbennett1288]

What is that thingamajiggy?

Charlie TARAC -

Check out our collection of Charlie Tarac products by visiting the website of TACOM HQ, Inc. Browse our available items.

tacomhq.com

 

[Btrain]

Charlie TARAC -

Check out our collection of Charlie Tarac products by visiting the website of TACOM HQ, Inc. Browse our available items.

tacomhq.com

Cool... thanks

 

[candyx]

Looks like a Mutoscope .

 

[Krob95]

Well. I’m finally adding an Elite Sand AI AXSA to my collection thanks to @SBGreen0369! Shorty 308 proof carbon barrel and a 6.5cm barrel to start. She will be on her way to me on Tuesday hopefully and even more hopefully I’ll get her out to the range before I go back on hitch! Now I’ll have the real thing to go with my Vudoo!

 

[ChadL]

Didn’t get it’s first blood yet, but will in the next few days.

 

[kocustoms]

congrats!!!

 

[kocustoms]

Elite sand!!!!! is the best color

 

[BuLLet]

Holy crap, he has paper towels! The shop ones even. That's like gold

Congrats on the new gun, you'll love it! Elite Sand, they shoot the best!

Well. I’m finally adding an Elite Sand AI AXSA to my collection thanks to @SBGreen0369! Shorty 308 proof carbon barrel and a 6.5cm barrel to start. She will be on her way to me on Tuesday hopefully and even more hopefully I’ll get her out to the range before I go back on hitch! Now I’ll have the real thing to go with my Vudoo!

View attachment 7472903

View attachment 7472908

 

[Krob95]

it’s supposed to be even more accurate than Sage green, right? Lol

 

[Huskydriver]

Well well well... What do I have here

 

[Sniperwannabee]

Well well well... What do I have here

View attachment 7473483

you dont have a SA 308 laying around do you hahha

 

[Huskydriver]

you dont have a SA 308 laying around do you hahha

A sa bolt for my axmc or a complete axsa?

 

[jbuck88]

What do you do about this climate we are in? I was wanting to dip my toes in the AXSR water, currently have a ax308 and had a axmc. I sold the axmc and wish I didn't.

I am trying to figure out what the easiest round to add right now. Can find loaded Prime 338LM ammo for $2.85/rd (cheaper then buying brass and loading myself). However a 300win or 300NM would fit my needs better. Already loading 300wsm, so have all the components except brass. Right now I'm limited to 1350yds, but that could grow soon. I would prefer a 300NM and only add a barrel to go to 338. Or go 338 and add a 300NM barrel.

Eventually I'd like to have a 6.5cm, 300, & 338. The 300 and 338 are still TBD as far as Winchester, Norma or Lapua.

Wife already squashed the ASR plan.

 

[BEJ762]

Well well well... What do I have here

View attachment 7473483

Where did you get the 300wm bolt? Been looking for one for a while.

 

[Huskydriver]

Where did you get the 300wm bolt? Been looking for one for a while.

That's a sfp 300wm bolt not a regular bolt and Mile high

 

[THEOZZ]

New AXMC's

 

[THEOZZ]

Well well well... What do I have here

View attachment 7473483

Nice. I need to find one of each of those to complete 2 setups.

 

[Sniperwannabee]

New AXMC

I see lots of sand and no trees ? Another Utah guy?

 

[THEOZZ]

I see lots of sand and no trees ? Another Utah guy?

Nebraska the edge of the Sandhills.

 

[pucker]

Well. I’m finally adding an Elite Sand AI AXSA to my collection thanks to @SBGreen0369! Shorty 308 proof carbon barrel and a 6.5cm barrel to start. She will be on her way to me on Tuesday hopefully and even more hopefully I’ll get her out to the range before I go back on hitch! Now I’ll have the real thing to go with my Vudoo!

Nice. 16” 308?

 

[Krob95]

Nice. 16” 308?

The barrel pictured is a 16.5” proof carbon barrel in 308win

 

[jbuck88]

Is the proof worth the weight saving on the AI platform? A shorter barrel 308 and a 6.5cm barrel is on the list.