Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Gaddayum thats nuts. Hope i never see that at work, work at our level 1 trauma center as a nurse.
Lord... I'm not getting sucked into a debate with some rando who spells rioters like rotors.
Different blow up. 3 diff guns there. Il editIsn't that the bolt, sitting in the receiver of the rifle- albeit at an angle? Looks pretty clean to have been lodged in a guy's neck...
That's wild. Out of curiosity is there anything that will fire in a 6.5 creedmoor gun that would cause similar problems? I imagine 6 Creed would get a little weird....
This precisely why I keep my ammo in boxes until it enters the magazine.
260 is a wonderful precision hunting round and a great platform to start reloading with. Confused why people use it for PRS anymore, though.
View attachment 7412412
You can use the same headspace gauge for 6 creed and 6.5 creed so I'm pretty sure 6 CM will chamber and fire in a 6.5 CM, but the bullet won't seal in the barrel since its smaller so you'll probably get a funny sound and the bullet will come out slow and unstable.
surgeon260 I was thinking the same thing about the different cartridge shoulder dimensions. But I saw it happen not 4 hours ago so I know 6.5 CM will chamber and fire in a 260. I also don't quite understand why it blew the primer and trashed the extractor, since powder charges between the two cartridges are almost identical, but obviously the mismatch in calibers did cause excessive pressure which blew the primer out.
Not sure what city you are in, but with time you will.
My first was a Remington 7600 in ‘06.
Guy used an old really beat up soft gun case, he told me about before he left for the OR.
Im guessing some junk from that kept the bolt from locking up properly.
Was using factory ammo.
Parts of the bolt caught him.
He has vision loss and some nice hardware in his maxilla, as well as some scars.
He was shooting it lefty also, which is why his face was near the ejection port.
You sure you wanna wade into this, calling bullshit on some very experienced people?What are you talking about "mismatch in calibers"? Both the .260 Rem and 6.5 creedmoor use a .264 diameter bullet. They are the same caliber.
The whole thing sounds like BS or maybe the guy had resized 6.5 brass to use in his 260 and had a hot load.
Feed him sum line, don’t jerk the lure out of his mouth too soon.You sure you wanna wade into this, calling bullshit on some very experienced people?
Asking for a friend...
Ive got no problem calling bullshit when I see it. The OPs story is BS or he doesnt know the facts or as pointed out, a troll. If you think I was calling BS on anything other than the OPs story you need to go back to grade school and learn what reading comprehension is.You sure you wanna wade into this, calling bullshit on some very experienced people?
Asking for a friend...
Ive got no problem calling bullshit when I see it. The OPs story is BS or he doesnt know the facts or as pointed out, a troll. If you think I was calling BS on anything other than the OPs story you need to go back to grade school and learn what reading comprehension is.
I did stay at a Holiday Inn Express...Hi,
LOLOLOL basing knowhow/facts/information on "What the Pro's Use"........
Name 5 "Pro's" in the PRS comp world!!
And I mean "Pro" as in they do nothing else but PRS matches for a LIVING.
I have yet to see a "Pro" F1 driver finishing cement Monday through Thursday...
I have yet to see a "Pro" Golfer running cattle ranch Monday through Thursday...
List goes on and on.....
Sincerely,
Theis
Most accurate comment of the whole thread... Happened to be the first.A face mask at an outdoor range? Time to find a new range. Fuck that...
I know you can run .260 thru a 6.5CM die. I just had this happen last night while sizing my 6.5 CM brass. The pull felt a little off and took more pressure than usual. Took the round off the press and low and behold I had a .260 case mixed in with all my 6.5CM. It bumped the shoulder back and I had one hell of a long neck. I would have caught it when I was trimming to length and realized I was trimming a country mile off the neck. I know where that damn round came from also. Range buddy was shooting his .260 while I was shooting my 6.5 and during the brass pickup I accidentally grabbed one of his cases and threw it in my bag.Reloads? Possible he ran a 6.5 case through his reloading process? Even if he trimmed to length, a lot of brass moving and certainly different internal capabilities when done. Or not even trimmed and pinched the bullet. Both could spike pressure and blow a primer for sure.
I have run a 6 creed through my 6.5 die by accident...it works. Also recently think there was a thread about a guy accidentally running some 6.5 brass through his 6 Creed die. Just a little case forming.
ZY
Define "bills." Does 2nd- or even 1st- pay the mortgage? or the kids college tuition? If by "bills" you mean "I can mostly recoup the cost of shooting" then no, 2nd doesn't really pay the bills.let the mid pack use their money for R and D
then take what they created and refine it
when your always in the lead you cant take chances
2nd place still pays the bills
Define "bills." Does 2nd- or even 1st- pay the mortgage? or the kids college tuition? If by "bills" you mean "I can mostly recoup the cost of shooting" then no, 2nd doesn't really pay the bills.
Look dipshit, if you actually read the thread you'd realize:
1. I (and others) were actually there.
2. Details were posted about the incident.
3. The fact that they are the same caliber/diameter bullet has fuck all to do with it, and proves you literally know enough to be fucking dangerous (which is obviously, not a lot).
So, I was polite before, now I won't be. Sit down, STFU, and open your mouth/type when you can actually contribute something, other than running your fucking suck, taking up oxygen. The only bullshit here, is what's streaming outta your fucking mouth.
Now. Care to go for the hat trick tough guy?
Ive got no problem calling bullshit when I see it. The OPs story is BS or he doesnt know the facts or as pointed out, a troll.
Hi,
LOLOLOL basing knowhow/facts/information on "What the Pro's Use"........
Name 5 "Pro's" in the PRS comp world!!
And I mean "Pro" as in they do nothing else but PRS matches for a LIVING.
I have yet to see a "Pro" F1 driver finishing cement Monday through Thursday...
I have yet to see a "Pro" Golfer running cattle ranch Monday through Thursday...
List goes on and on.....
Sincerely,
Theis
Find me a real cattle rancher/raiser working Mon-Thurs and I will kiss Hillary.
Perhaps gramps at 85 has slowed down to 4-5 10 hr days.
I get your point. Im just sayin.....
Easily happens. My eyes suck anymore. Have reading glasses but shoot using my 'far' (driving) glasses. Much easier to see down range + better look through my scopes. I shoot 6.5CM and 308 bolt rifles, and 5.56 and 300 BO semis. I have taken to using the plastic electricians colored tapes to define my ammo and rifles. Red for 300 BO stripe on the mag well and the mags plus a stripe on the ammo backup can. etc etc. Simple but effective. Of course if I only had one caliber........Not a match cartridge, but I seen a guy that couldn't get his gun sighted in at the range. He was shooting .270 through his 30-06. Apparently he had both guns and grabbed wrong ammo.
Look dipshit, if you actually read the thread you'd realize:
1. I (and others) were actually there.
2. Details were posted about the incident.
3. The fact that they are the same caliber/diameter bullet has fuck all to do with it, and proves you literally know enough to be fucking dangerous (which is obviously, not a lot).
So, I was polite before, now I won't be. Sit down, STFU, and open your mouth/type when you can actually contribute something, other than running your fucking suck, taking up oxygen. The only bullshit here, is what's streaming outta your fucking mouth.
Now. Care to go for the hat trick tough guy?
No ones trying to be a tough guy but you dumbfuck.
No ones trying to be a tough guy but you dumbfuck.
What only 30 days??? Idiots like that should be Permabanned to keep their stupidity from wasting our time!Sigh...okay Karen, keep running your suck. See you in a month (I just don't have the time or patience to deal with your keyboard commando antics).
View attachment 7414750