Finally got my suppressor. Sabre Defence A3 AUG just got even more fun!
Finally got my suppressor. Sabre Defence A3 AUG just got even more fun!
Holy super baller batman!
You sir are a gentleman and a scholar! And absolutely welcome any time to come have some fun on my 2500 acre pine plantation!Have you run the A1 in a large frame AR, SCAR 17 or 20, etc good-shooting .308?
If so, what kinda groups can you expect out of it? Whats the ballistics comparable to(BC, MV, ES/SD)??
To our hide brethren Galil Ace owners: have any of yall ever ran any hand loads/match grade ammo through your Galil Ace? Results??
So I took this to the range yesterday, it felt pretty damn awesome.
Stock Norinco NDM-86 in 7.62x54r.
Stock Norinco NDM-86 in 7.62x54r.
I guess there are 5 photoes in the thread of Chinese NDM sister-clones of SVD ( including the newly acquired one, presented in the post above - congratulations ) but none of the original.
So let's show one :
SVD 1973, 320mm barrel twist, PSO-1 matched to the rifle.
Plus : Belomo POSP 4-12x42, NPZ 3-9x24, PS-07 and night vision scope 1PN-51Kazuar.
6H4 bayonet - it seems that for early 70s rifle there should be a 6H3 variant.
Modern DSR Immortal Steel silencer.
It took me few years to put it all together
So let's show one :
SVD 1973, 320mm barrel twist, PSO-1 matched to the rifle.
Plus : Belomo POSP 4-12x42, NPZ 3-9x24, PS-07 and night vision scope 1PN-51Kazuar.
6H4 bayonet - it seems that for early 70s rifle there should be a 6H3 variant.
Modern DSR Immortal Steel silencer.
It took me few years to put it all together
Interesting choice of candle with the AK. Starting to see where all your money for badass rifles comes from..
Just got one of these:
PSA AK 101
Heads up the rail works with ZenitCo railed cover. I’m sending this off to RD for some stuff.
PSA AK 101
Heads up the rail works with ZenitCo railed cover. I’m sending this off to RD for some stuff.
Have you shot it yet? I've always felt like the AK is "the right kind" of rifle for PSA to make.
Just picked it up today. The plan is to send it off to RD and have them do some stuff to it first. I’ll be shooting it suppressed with LC ammo. They will set it up as a soft shooter, instead of being over gassed. I’ll get it back in a couple of months and then shoot it.
Shouldn’t this be on the AR picture thread?
Now that they can be had in 5.56, I've been thinking about picking one up. Also because they are getting a lot more love from the after-market, as well.
Anybody got any clue WTF this is or any info on it?
Interesting chassis design - cool to see FN free floating whatever this machine gun is..
Interesting chassis design - cool to see FN free floating whatever this machine gun is..
It's the EVOLYS. Developed from their NGSW prototype submittal.Anybody got any clue WTF this is or any info on it?
Interesting chassis design - cool to see FN free floating whatever this machine gun is..
Some of the more eclectic items I have:
Gewehr 43
Some of my SBR's:
Some 9mm SBR's (and one .45 ACP M1A1):
OOW BAR:
Not really super-special, but fun:
PSG8; surprisingly accurate and much better than living life as an SL-8:
G36K SBR (HK kit w/TB receiver):
SIG 556 hybrid:
My newest acquisition and my first 6.5CM rifle - Wilson Combat Super Sniper:
Gewehr 43
Some of my SBR's:
Some 9mm SBR's (and one .45 ACP M1A1):
OOW BAR:
Not really super-special, but fun:
PSG8; surprisingly accurate and much better than living life as an SL-8:
G36K SBR (HK kit w/TB receiver):
SIG 556 hybrid:
My newest acquisition and my first 6.5CM rifle - Wilson Combat Super Sniper:
Interesting. What's the barrel details on the PSG8?Some of the more eclectic items I have:
Gewehr 43
Some of my SBR's:
Some 9mm SBR's (and one .45 ACP M1A1):
OOW BAR:
Not really super-special, but fun:
PSG8; surprisingly accurate and much better than living life as an SL-8:
G36K SBR (HK kit w/TB receiver):
SIG 556 hybrid:
My newest acquisition and my first 6.5CM rifle - Wilson Combat Super Sniper:
,,,,,,,,,,,,,,,,,,,,,,,,,,,
Last edited:
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Last edited:
Mmmmm....
I just saw somebody selling a Valmet M78 LMG in 7.62x39 in Finland.
No, I cannot afford it, and no, I don't want to jump the hoops to own it here.
Picked up a DSA 50.63 clone (one of 60 being furnished with aluminum lower) for my own use
. Actually weighs just 8.6 LB, as advertised. A borescope examination of the chrome lined barrel revealed a bright & smooth chamber with a very tidy throat, plus clean rifling to the muzzle and a well done crown. I took a chance and added DSA's $150 trigger job - and I'm glad I did.
I finally got an FAL again after being with out one for about 20 years....
this one is kinda a rare duck these days
Last edited:
Israeli FAL just back from Arizona Response Systems:
The old Mini-14 that does shoot, now. It is a 181 early, SS, boat gun, shotgun style group shooter conversion to a sub 1/2" group shooter. Mods, a compleate dissembly, barrel cut and recrowned on my lathe, gas block from ASI, piston and plugs sized and replaced, actuator rod polished and fitted, 8" barrel shroud, trigger job, glass bedded, stock butt pad to extend the LOP. Witichita center mounted scope base. It is a, simply because I can, Mini. It has a couple of wild hogs DRT to its credit.
The Mini is exactly like the M-14, if the round goes into the chamber, it will fire, so with accuracy it becomes a very reliable rifle.
The Mini is exactly like the M-14, if the round goes into the chamber, it will fire, so with accuracy it becomes a very reliable rifle.
Attachments
I had a mini in the early 90s when I was a young man. I couldn't afford much more then that at the time. It was a fun gun. I loved shooting it but it was minute of paper plates at 100 yards. I often thought of getting another and putting it in Sage folding stock but I just can't bring myself to pay $800 for one. Maybe one day I'll find a deal on one....
