another quickload help?

[SPAK]

Would anyone be willing to run my load through quickload for me?? I'm curious to see what the pressure estimates are:

.30-06 208gr Amax 57-59gr RL 22 cci 200, 3.34" oal (.02" off the lands) 22" barrel
57.0gr avg vel 2664fps
59.0gr avg vel 2735fps

Thanks in advance.

On a side note, I'm contemplating buying the software. What have you guys found to be most beneficial about the program? I don't know too much about it but it seems very similar to some of the archery programs I've used before in arrow selection. How accurate are the estimates/calculations to real world numbers?? Any thoughts would be great!

 

[918v]

Re: another quickload help?

how loong is the 208 amax? QL amax numbers are inaccurate.

 

[The Mechanic]

Re: another quickload help?

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=517595#Post517595

It is a great program works like a champ. It was on a group buy. It is well worth the money.

http://www.snipershide.com/forum/ubbthre...376#Post1230376

 

[SPAK]

Re: another quickload help?

208 Amax is 1.534" long.
Is the group buy still going?

 

[918v]

Re: another quickload help?

My QL did not have 208gr A-Max data, so I modified Berger's length to your spec.


Cartridge : .30-06 Spring.
Bullet : .308, 210, Berger VLD
Cartridge O.A.L. L6: 3.340 inch or 84.84 mm
Barrel Length : 22.0 inch or 558.8 mm
Powder : Alliant Reloder-22

Predicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !

Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms

-20.0 91 47.20 2099 2055 31753 8733 88.3 1.560
-18.0 93 48.38 2157 2169 34073 9033 89.8 1.514
-16.0 95 49.56 2214 2286 36580 9323 91.1 1.470
-14.0 97 50.74 2272 2407 39287 9602 92.4 1.421
-12.0 100 51.92 2330 2532 42217 9868 93.6 1.374
-10.0 102 53.10 2389 2661 45392 10120 94.7 1.328
-08.0 104 54.28 2447 2793 48835 10356 95.8 1.284
-06.0 106 55.46 2506 2929 52576 10575 96.7 1.241 ! Near Maximum !
-04.0 109 56.64 2565 3068 56650 10774 97.5 1.200 ! Near Maximum !
-02.0 111 57.82 2624 3211 61090 10954 98.2 1.161 !DANGEROUS LOAD-DO NOT USE!
+00.0 113 59.00 2683 3358 65943 11111 98.8 1.122 !DANGEROUS LOAD-DO NOT USE!
+02.0 116 60.18 2743 3507 71257 11245 99.3 1.085 !DANGEROUS LOAD-DO NOT USE!
+04.0 118 61.36 2802 3661 77092 11354 99.6 1.049 !DANGEROUS LOAD-DO NOT USE!
+06.0 120 62.54 2861 3817 83517 11437 99.9 1.014 !DANGEROUS LOAD-DO NOT USE!
+08.0 122 63.72 2920 3976 90611 11492 100.0 0.980 !DANGEROUS LOAD-DO NOT USE!
+10.0 125 64.90 2979 4139 98437 11521 100.0 0.948 !DANGEROUS LOAD-DO NOT USE!

Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 113 59.00 2814 3692 81281 10730 100.0 1.034 !DANGEROUS LOAD-DO NOT USE!
Data for burning rate decreased by 10% relative to nominal value:
-Ba 113 59.00 2501 2917 52642 10835 92.7 1.236 ! Near Maximum !

 

[SPAK]

Re: another quickload help?

Thanks for the info!