Autotrickler V3 - CE Products?

#251
PrecisionJAR said:
Any updates on fulfillment timeframes? I ordered on May24 through CE. Will post when I get a shipping notification
Click to expand...

"your order number is #5838 you ordered on May 7th

We are currently shipping orders out from April 26th and before "

^^^^ This was sent to me on July 2nd....I should be really really close to getting the final payment email...any day now.....so...you are looking at 2-3 weeks probably.
 
#252
The digital mini level is a nice touch to video! Might need to get one of those!

HemiPowrd said:
I just got the digital level so I haven't actually used it for anything yet. The theory is I will use it to set different angles on the autotrickler depending on the type of powder I'm using. Once I have the "correct" angle for a given powder I'll record it for future use. It'll make it that much easier and faster to set the "correct" angle when switching between powders.

I have used different angles on the autotrickler and it is part of the tuning process to get the proper amount of powder (it's in the V3 manual). So far for the powders I'm using it seems like a slight "upward" angle on the straw gives the most consistent results.

Edit: I forgot to give credit to Elfster for this. He shows setting up various angles for the autotrickler in one of his many V3 autotrickler videos. I just took it to the next logical step using a digital level.
Click to expand...
 
  • Like
Reactions: HemiPowrd
#253
Well...just finished sending my payment in!!!! #5838 got my notification in early this morning while I was getting my beauty sleep....now transaction complete. I think I'll go wait by the curb and cuss the UPS man for a week ;)

If it arrives before Thursday....I have 50 rounds of 300PRC just waiting to try it out....and that can then go shoot the 1 mile GBA event at TVP on the 18th...and I can see if it helped my vertical dispersion.....or if I just suck as a shooter ;)

So... #5838 is the latest number...if you are close....get ready!
 
  • Like
Reactions: Cobblestone, black5.3 and Milo 2.5
#254
A note on my email experience. First....the CE Products email went to my SPAM folder....so pulled it out of the SPAM folder. The Payment form is web based and when I submitted it declined my card...and I instantly got a text from my bank for fraud protection. I had to verify that the payment was legit and try the payment option again....and it worked.

So..for those with tight SPAM policies....and those with tight fraud protection from their banks....maybe keep this in mind if things go wonky on you.
 
#255
I currently have a v2 w/ the v3 electronics upgrade with bluetooth.

Is the V3 Autothrower that much of an upgrade? Should I upgrade my autothrower from V2 to V3 Autothrower?

Its about $240 from autotricker to get the v3 upgrade. $360 from Area419 to trick it out.
 
#257
Just to follow up,
The Area 419 clear top works great.

www.area419.com

Area 419 - LID for A&D FXi Scales

This is only compatible with Area 419 V2 Auto throw Housings or V3 Thrower housings. Since we released the upgraded Auto-Throw Housing and the Hopper, people have been unsatisfied with the rigidity of that junk plastic lid that comes with the A&D scale. We get it, our wives have tupperware with...
www.area419.com www.area419.com

Again, I just have the stock powder throw, not the Area 419 version.


IMG_1956.jpeg


IMG_1957.jpeg
 
  • Like
Reactions: Sixwhiskey and black5.3
#258
Phoned today and added the 419 lid to my order (6205) which was placed on June 22nd. This wait is painful, especially when I've got matches coming up and want to use my new toys
 
#263
b2lee said:
Well...just finished sending my payment in!!!! #5838 got my notification in early this morning while I was getting my beauty sleep....now transaction complete. I think I'll go wait by the curb and cuss the UPS man for a week ;)

If it arrives before Thursday....I have 50 rounds of 300PRC just waiting to try it out....and that can then go shoot the 1 mile GBA event at TVP on the 18th...and I can see if it helped my vertical dispersion.....or if I just suck as a shooter ;)

So... #5838 is the latest number...if you are close....get ready!
Click to expand...
Only 145 to go, 5983.
 
  • Like
Reactions: b2lee
#270
b2lee said:
A note on my email experience. First....the CE Products email went to my SPAM folder....so pulled it out of the SPAM folder. The Payment form is web based and when I submitted it declined my card...and I instantly got a text from my bank for fraud protection. I had to verify that the payment was legit and try the payment option again....and it worked.

So..for those with tight SPAM policies....and those with tight fraud protection from their banks....maybe keep this in mind if things go wonky on you.
Click to expand...

Yuh,
Really sucks when the bank calls the house, and the wife answers...... Busted.
 
  • Like
Reactions: Shootnwrench, black5.3 and b2lee
#278
Question for those that have done it? if you upgrade to the Area 419 lid, tray and powder cup, do you need to replace the "straw"? with the clear lid?
Thanks troops.
 
#281
I just bought the "kit" on sale, that included the straw, tray & lid, for $165, the lid is sold out just abtout everywhere. I'm hoping the Area 419 straw will work with the OEM V3 auto
throw. 🙏
 
#293
Cobblestone said:
Mine came in today
Click to expand...

You beat me....Mine won't be in until Thursday...I had to back the truck up a few days to be delivered when I'm home....just didn't want to leave that out for the porch bandits to get while I was away making the donuts. 12-14 hour work days don't leave much time to be home for deliveries.

The good news is...I'll receive my two huge boxes of Inline Fabrication plates I ordered a few weeks back....takes time to drill custom plates and send them off for powder coating.
 
  • Like
Reactions: Cobblestone
#294
b2lee said:
You beat me....Mine won't be in until Thursday...I had to back the truck up a few days to be delivered when I'm home....just didn't want to leave that out for the porch bandits to get while I was away making the donuts. 12-14 hour work days don't leave much time to be home for deliveries.

The good news is...I'll receive my two huge boxes of Inline Fabrication plates I ordered a few weeks back....takes time to drill custom plates and send them off for powder coating.
Click to expand...
Well worth the wait
 
You must log in or register to reply here.

Similar threads

J
Reloading Equipment AUTOTRICKLER V2, V3 and V4 Riser Mod for support of both Factory Circular scale pan and Area 419 Triangle scale pan
Replies
31
Views
4K
Jakeweb09
Jakeweb09
Five7guy
SOLD PRS 6mm BR Manners TCS PRS Impact 737 Straight Jacket Armory w/ Components
Replies
12
Views
2K
Five7guy
Five7guy
Aries64
Accessories VERY FEW TAC OPS DRAG BAGS REMAINING!
Replies
11
Views
1K
Aries64
Aries64
Aries64
Group Buys VERY LIMITED NUMBER OF OLIVE DRAB, COYOTE BROWN, & MULTICAM TAC OPS DRAG BAGS AVAILABLE
Replies
27
Views
2K
Aries64
Aries64
M
Trouble with an FFL
Replies
41
Views
2K
Midgetcatcher
M
Top Bottom
Back
Home
Forums
Merch
Alerts