-
Having trouble using the site?
Contact support
Best way to cut the foam from Pelican case??
- Thread starter stan462
- Start date
Re: Best way to cut the foam from Pelican case??
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2076241
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2076241
Re: Best way to cut the foam from Pelican case??
I used the long blade for a carpet knife. Be careful it"s sharp on both sides
I used the long blade for a carpet knife. Be careful it"s sharp on both sides
Re: Best way to cut the foam from Pelican case??
I just use a really sharp knife with a blade a bit longer than the foam is thick....works like a charm.
I just use a really sharp knife with a blade a bit longer than the foam is thick....works like a charm.
Re: Best way to cut the foam from Pelican case??
This was very helpful, I was looking for an easier way to do this accurately also.
This was very helpful, I was looking for an easier way to do this accurately also.
Re: Best way to cut the foam from Pelican case??
I took one of the extendable box cutters and with a blow torch heated the blade and cut small sections that way. Worked like a charm!
I took one of the extendable box cutters and with a blow torch heated the blade and cut small sections that way. Worked like a charm!
Re: Best way to cut the foam from Pelican case??
Havalon folding knife with a #60 blade, trace out shapes with a paint pen and cut outside the lines. Buy a couple dozen extra blades and you can get a lot of foam cut out. Or you can not worry about having compartments for everything and get a soft case that fits into the gun box.
Havalon folding knife with a #60 blade, trace out shapes with a paint pen and cut outside the lines. Buy a couple dozen extra blades and you can get a lot of foam cut out. Or you can not worry about having compartments for everything and get a soft case that fits into the gun box.
Re: Best way to cut the foam from Pelican case??
the hot knife sounds like a pain but is well worth it. The other knives are fast but aren't as clean.
If you need it now a razor knife will work but if you want a professional look, hot knife is the way to go. Most parts can be found at your local hardware store or radio shack...maybe already have stuff around the house.
look around your house for a old dc transformer...12 to 25watts is good enough for that stuff
the hot knife sounds like a pain but is well worth it. The other knives are fast but aren't as clean.
If you need it now a razor knife will work but if you want a professional look, hot knife is the way to go. Most parts can be found at your local hardware store or radio shack...maybe already have stuff around the house.
look around your house for a old dc transformer...12 to 25watts is good enough for that stuff
