Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
How do u like the Steiner? I'm looking for a new optic eventually and that's on my shortlist. Nice rifle btw. Weighs the same as my 24" medium Palma in a jcs composites and athlon midas tacI’ve been creeping on this thread for some time now, moved some inventory from the safe, and now have a 99% complete Bighorn Origin build (waiting on an HLR recoil lug):
Origin SA
Proof CF 6.5 creedmoor TL3 pre-fit 20” barrel
KRG Bravo w/custom paint job (DIY by yours truly)
Trigger tech special
Steiner T5Xi 3x15
Rugged Micro30
Atlas bipod
Weight as pictured without ammo: 12.4 lbs
Brownells currently showing RH SA Origins Std,Boltface in stock.
TM6
How do u like the Steiner? I'm looking for a new optic eventually and that's on my shortlist. Nice rifle btw. Weighs the same as my 24" medium Palma in a jcs composites and athlon midas tac
Can’t really argue with those resultsView attachment 7404899View attachment 7404903
Origin receiver
Proof Research CF Savage Prefit
Athlon Ares ETR
Seekins Rings
KRG Bravo
Dead Air Sandman TI
this was the second 5 shot group I shot. Load development done!
24”. 1-8Trigger happy. I have about that exact set up. Haven’t got my barreled action due to technical difficulties, it’s the same. What length and twist is that barrel. Mine is the I twist 22inch.
What height are those rings. I have the cronus btr.24”. 1-8
.92 I have to raise the cheek riser about 1/8”What height are those rings. I have the cronus btr.
View attachment 7404899View attachment 7404903
Origin receiver
Proof Research CF Savage Prefit
Triggertech Primary @ 1.5#
Athlon Ares ETR
Seekins Rings
KRG Bravo
Dead Air Sandman TI
this was the second 5 shot group I shot. Load development done!
Rifle/scope no suppressor or mag 10lb 14oz feels lighter though.Do You have a weight on this setup?
Basically have the exact thing in mind... nice looking rig.
What is the average weight of a build with an origin, KRG bravo, and a 26” M24 taper 308 barrel?
I’m sure someone here has something similar to that.
thanks
Is this a barreled action from Altus?Sure why not...
Bighorn Origin
24” Bartlein M24
Manners T4a
Triggertech Diamond
Vortex AMG
ARC M10’s
419 Hellfire
Atlas C&L
View attachment 7112525
Wow! I was just hopping on to ask this exact question, I’m about to buy the eh1 with the mini chassis.Just double checking before I pull the trigger on some stuff. Will the origin fit properly in a manners rem700 footprint stock?
It should fit and function just fine, but the ejection port window on the stock will be smaller than the action's ejection port. A very simple fix that's able to be done by hand.Just double checking before I pull the trigger on some stuff. Will the origin fit properly in a manners rem700 footprint stock?
Took 4 days from NSS.Everyone seeing pretty much 12-14 weeks right now on wait period from Zermatt? Not in any rush just curious.
Mines been on order since 6/5...Everyone seeing pretty much 12-14 weeks right now on wait period from Zermatt? Not in any rush just curious.
Please send us a message. There's no reason your order shouldn't have been ready for some time now.Mines been on order since 6/5...
Yup same boatStill waiting on mine from keystone ordered in june
Message sentPlease send us a message. There's no reason your order shouldn't have been ready for some time now.
Thank you - Ray
What barrel contour is that?
There's no need to send TT triggers in for timing. They've been the most consistent trigger we've seen come through in many different ways and they all time up within about .005" with a .015" under sized cocking piece in the Origin. ALL of our Origin actions are using those cocking pieces and have been for some time now.@Zermatt Arms
Ray - Just ordered my second Origin the other day. When we spoke about sending the trigger to get timed (TT Special), you said it wasn't worth it anymore due to a change you made somewhat recently. I was wondering if you had more info on that. Figured I would post about it here in case others were thinking about doing the same. Thanks!
Good to hear, thanks for the info Ray.There's no need to send TT triggers in for timing. They've been the most consistent trigger we've seen come through in many different ways and they all time up within about .005" with a .015" under sized cocking piece in the Origin. ALL of our Origin actions are using those cocking pieces and have been for some time now.
It's very different on TL3 or SR3 actions, so if you go that route, we'd still perform that service for you. It's just not worth the time or money in shipping to send your TriggerTech triggers for Origin actions.
Thanks - Ray
BH LA
Preferred Barrel Blanks .300 PRC Chambered, 24”, Heavy Palma, 1:9, 3/4-24 muzzle threads
Area 419 Sidewinder brake
TT Diamond set at 14oz
KRG Bravo Stock
MDT 5rd CIP Length Mags
SWFA 10x42 (for now, Brownell’s MPO 5-25x56 on the way)
Warne Xskell Mount (34mm Xskell on the way)
Unfired until I get back home on the 19th. View attachment 7368486View attachment 7368487
Why the M24 contour? I’m trying to figure out what contour I want for my 6 BR, thinking medium Palma or marksman as of now.I put a deposit on an Origin last week. It will be my first custom centerfire. I've only had Remingtons before. I am planning on a Bartlein 26" M24 contoured barrel chambered in 6BR. From what I have read, it sounds like the Origin is a really good receiver for the 6BR and it's offshoots as far as feeding/ extraction/ ejection is concerned. It will be a while before I can afford to have it all finished and ready to go, but I have enjoyed checking out all these photos!
weight and balanceWhy the M24 contour? I’m trying to figure out what contour I want for my 6 BR, thinking medium Palma or marksman as of now.