Accessories Bog Deathgrip Tripod Ball Head Kit

[matt klabisch]

I would like a full kit. Please pm me! Thanks!!

 

[Bullseyebry]

I would like a kit. Please let me know how you want payment.

 

[Wild Eyes Woodworks]

Nice! Just what I’m looking for. Will send a pm and order from you on Friday.

 

[hardknock]

PM'd

 

[Scruf308]

I’d like a full kit.

 

[280 AI]

I would like the full kit.

 

[STI_1911_Guy]

More orders will be shipping out next week. Thanks Everyone!!

 

[STI_1911_Guy]

Just got the previous batch out early so next batch will ship out this week, let me know if anybody wants one!! Thanks.

 

[STI_1911_Guy]

^

 

[Robert Forster]

I would like a full kit. Let me know how we process that

 

[alc70]

Just got the previous batch out early so next batch will ship out this week, let me know if anybody wants one!! Thanks.

I would like the full kit

 

[STI_1911_Guy]

^

 

[JWP]

I would like a complete kit please advise path forward

 

[Hal4son]

I would like two full kit(s).

 

[JWP]

I got mine yesterday and yup makes the Bog Pod so much better it’s now what I wanted but could not afford

 

[Ryandavisnc]

PM sent.

 

[Hawk86]

Would like to purchase full kit.what is next step

 

[280 AI]

Received my kit. Works great! Thank you

 

[Steeske]

I would like a complete kit, please pm me the next step details

 

[Hal4son]

Received the two units. A HUGE improvement to the BOG. My only difficulty was getting the original unit disassembled. A light tap with a rubber mallet on the top portion popped it free (tapped out, away from the legs).

I would highly recommend this upgrade.

 

[vette74]

I would like a full kit. How do I pay.

 

[Brandonf88]

****UPDATE***

****I have been working on a printed bushing to replace the aluminum one for a few reasons. Main one being availability, I can print these like any of my other items so sourcing is not an issue. I can also pass the cost savings on to you guys and a little more weight reduction. I will be working on a printed adapter plate in the future also. I wanted to make sure the integrity and strength were both still very sound so I adjusted materials and design until I got it right. ***** There will be nothing new to installation, a dab of Loctite is still highly recommended on the ball head bolt. Just snug it up good, no need to over tighten. There are some variances in the BOG castings so you may hear a slight pop as the lip in the bushing pops over the casting but its fine and expected on some as I keep the fit fairly snug on the bushing.

I have also added an eyebolt addition you can use to hang equipment from. When you purchase it just let me know if you want the eye bolt or regular bolt.

For installation of the eyebolt you will install the bushing then slide the eye bolt up through and tighten fully into the ball head until it bottoms out. Then loosen the eye bolt 1 full turn and lock the nut down while holding the eye bolt from turning if necessary.



I have made up a few ball head conversion kits for the Bog Deathgrip Tripod. I tried to keep the price down as low as possible while maintaining good quality equivalent to the Bog Tripod.

- Prices shipped TYD.
- *** Continually making them as requested. I will inform you of any excessive backlog.
- There are 5 options.

The ball head is rated at 33 lbs and has 360 degree rotation (lockable) base in addition to the ball head and the ball head is lockable and adjustable for tension. This will accept arca-swiss style devices including the numerous picatinny to arca and such items on the market.

To install you would have to remove the one bolt holding the deathgrip to the tripod. Once you do this the bearings and bushings (you will not need these any longer) will come out. You will end up with a hollow casting as seen in the images. Once you have this you can insert the aluminum bushing from the bottom, then insert the new bolt through the bushing and install the ball head onto it. I recommend a dab of Loctite on the bolt before installation.

If you want to use the deathgrip that you just removed you need the kit with the adapter plate. This plate with the 4 supplied screws will attach to the deathgrip head and can then be locked into the arca-swiss ball head.

This entire assembly weighs ~15oz, you will be removing ~8oz to install. So in total you will add about 8 oz to your setup, plus any additional items you decide to add.

Bog Deathgrip Tripod Ball head kit and adapter plate (full kit) $110: This will come with the ball head, bushing and 3/8-16 bolt to attach the ball head. In addition this will come with the adapter plate to attach to the deathgrip that can then be placed into the arca-swiss ball head.
Bog Deathgrip Tripod Ball head kit only $95: This will come with the ball head, bushing and 3/8-16 bolt to attach the ball head.
Bog Deathgrip Bushing, Bolt and Adapter Plate Only $55: This will come with the bushing for the tripod, The 3/8-16 bolt for most ballheads and the adapter plate to attach the deathgrip to Arca-Swiss. This is for if you have your own ballhead but want to be able to attach the deathgrip to it if desired.
Bog Deathgrip Adapter Plate and Screws Only $45: This will come with the adapter plate and 4 screws only.
Bog Deathgrip Bushing and Bolt Only $40: This will com with the bushing and bolt only. This option would be great for someone with their own ballhead and no desire to be able to reattach the deathgrip.


I also have small plates with the standard 1/4-20 screw. If you have any accessories that would benefit from a custom printed fixture that would allow you to attach it to an Arca-Swiss plate, which could then be put on a tripod or something else please send me a PM and we can figure something out.


Items other members have requested

Amp Annealer Bushing Die Holder And Organizer Case Length/Headspace Gauge Organizer Hornady Comparator Organizers Bullet Pullers Expanding Mandrel Organizer Trimmer Brass Catchers Giraud Trimmer Organizer Hornady OAL Organizer K&M Neck Turning Organizer Loading Trays Primer Tube Holders Shellholder Racks WFT Holder AR Upper Hanger Bog Deathgrip Tripod Ball head Area 419 Funnel Organizer Henderson Trimmer Organizer

How do I purchase a full kit?

 

[Matthew Anderson]

I would love to grab the kit minus the Ball Head. I’ll look out for a PM. Thanks!

 

[Bobo06]

****UPDATE***

****I have been working on a printed bushing to replace the aluminum one for a few reasons. Main one being availability, I can print these like any of my other items so sourcing is not an issue. I can also pass the cost savings on to you guys and a little more weight reduction. I will be working on a printed adapter plate in the future also. I wanted to make sure the integrity and strength were both still very sound so I adjusted materials and design until I got it right. ***** There will be nothing new to installation, a dab of Loctite is still highly recommended on the ball head bolt. Just snug it up good, no need to over tighten. There are some variances in the BOG castings so you may hear a slight pop as the lip in the bushing pops over the casting but its fine and expected on some as I keep the fit fairly snug on the bushing.

I have also added an eyebolt addition you can use to hang equipment from. When you purchase it just let me know if you want the eye bolt or regular bolt.

For installation of the eyebolt you will install the bushing then slide the eye bolt up through and tighten fully into the ball head until it bottoms out. Then loosen the eye bolt 1 full turn and lock the nut down while holding the eye bolt from turning if necessary.



I have made up a few ball head conversion kits for the Bog Deathgrip Tripod. I tried to keep the price down as low as possible while maintaining good quality equivalent to the Bog Tripod.

- Prices shipped TYD.
- *** Continually making them as requested. I will inform you of any excessive backlog.
- There are 5 options.

The ball head is rated at 33 lbs and has 360 degree rotation (lockable) base in addition to the ball head and the ball head is lockable and adjustable for tension. This will accept arca-swiss style devices including the numerous picatinny to arca and such items on the market.

To install you would have to remove the one bolt holding the deathgrip to the tripod. Once you do this the bearings and bushings (you will not need these any longer) will come out. You will end up with a hollow casting as seen in the images. Once you have this you can insert the aluminum bushing from the bottom, then insert the new bolt through the bushing and install the ball head onto it. I recommend a dab of Loctite on the bolt before installation.

If you want to use the deathgrip that you just removed you need the kit with the adapter plate. This plate with the 4 supplied screws will attach to the deathgrip head and can then be locked into the arca-swiss ball head.

This entire assembly weighs ~15oz, you will be removing ~8oz to install. So in total you will add about 8 oz to your setup, plus any additional items you decide to add.

Bog Deathgrip Tripod Ball head kit and adapter plate (full kit) $110: This will come with the ball head, bushing and 3/8-16 bolt to attach the ball head. In addition this will come with the adapter plate to attach to the deathgrip that can then be placed into the arca-swiss ball head.
Bog Deathgrip Tripod Ball head kit only $95: This will come with the ball head, bushing and 3/8-16 bolt to attach the ball head.
Bog Deathgrip Bushing, Bolt and Adapter Plate Only $55: This will come with the bushing for the tripod, The 3/8-16 bolt for most ballheads and the adapter plate to attach the deathgrip to Arca-Swiss. This is for if you have your own ballhead but want to be able to attach the deathgrip to it if desired.
Bog Deathgrip Adapter Plate and Screws Only $45: This will come with the adapter plate and 4 screws only.
Bog Deathgrip Bushing and Bolt Only $40: This will com with the bushing and bolt only. This option would be great for someone with their own ballhead and no desire to be able to reattach the deathgrip.


I also have small plates with the standard 1/4-20 screw. If you have any accessories that would benefit from a custom printed fixture that would allow you to attach it to an Arca-Swiss plate, which could then be put on a tripod or something else please send me a PM and we can figure something out.


Items other members have requested

Amp Annealer Bushing Die Holder And Organizer Case Length/Headspace Gauge Organizer Hornady Comparator Organizers Bullet Pullers Expanding Mandrel Organizer Trimmer Brass Catchers Giraud Trimmer Organizer Hornady OAL Organizer K&M Neck Turning Organizer Loading Trays Primer Tube Holders Shellholder Racks WFT Holder AR Upper Hanger Bog Deathgrip Tripod Ball head Area 419 Funnel Organizer Henderson Trimmer Organizer

How do i order the whole ball head kit for my death grip

 

[Bobo06]

****UPDATE***

****I have been working on a printed bushing to replace the aluminum one for a few reasons. Main one being availability, I can print these like any of my other items so sourcing is not an issue. I can also pass the cost savings on to you guys and a little more weight reduction. I will be working on a printed adapter plate in the future also. I wanted to make sure the integrity and strength were both still very sound so I adjusted materials and design until I got it right. ***** There will be nothing new to installation, a dab of Loctite is still highly recommended on the ball head bolt. Just snug it up good, no need to over tighten. There are some variances in the BOG castings so you may hear a slight pop as the lip in the bushing pops over the casting but its fine and expected on some as I keep the fit fairly snug on the bushing.

I have also added an eyebolt addition you can use to hang equipment from. When you purchase it just let me know if you want the eye bolt or regular bolt.

For installation of the eyebolt you will install the bushing then slide the eye bolt up through and tighten fully into the ball head until it bottoms out. Then loosen the eye bolt 1 full turn and lock the nut down while holding the eye bolt from turning if necessary.



I have made up a few ball head conversion kits for the Bog Deathgrip Tripod. I tried to keep the price down as low as possible while maintaining good quality equivalent to the Bog Tripod.

- Prices shipped TYD.
- *** Continually making them as requested. I will inform you of any excessive backlog.
- There are 5 options.

The ball head is rated at 33 lbs and has 360 degree rotation (lockable) base in addition to the ball head and the ball head is lockable and adjustable for tension. This will accept arca-swiss style devices including the numerous picatinny to arca and such items on the market.

To install you would have to remove the one bolt holding the deathgrip to the tripod. Once you do this the bearings and bushings (you will not need these any longer) will come out. You will end up with a hollow casting as seen in the images. Once you have this you can insert the aluminum bushing from the bottom, then insert the new bolt through the bushing and install the ball head onto it. I recommend a dab of Loctite on the bolt before installation.

If you want to use the deathgrip that you just removed you need the kit with the adapter plate. This plate with the 4 supplied screws will attach to the deathgrip head and can then be locked into the arca-swiss ball head.

This entire assembly weighs ~15oz, you will be removing ~8oz to install. So in total you will add about 8 oz to your setup, plus any additional items you decide to add.

Bog Deathgrip Tripod Ball head kit and adapter plate (full kit) $110: This will come with the ball head, bushing and 3/8-16 bolt to attach the ball head. In addition this will come with the adapter plate to attach to the deathgrip that can then be placed into the arca-swiss ball head.
Bog Deathgrip Tripod Ball head kit only $95: This will come with the ball head, bushing and 3/8-16 bolt to attach the ball head.
Bog Deathgrip Bushing, Bolt and Adapter Plate Only $55: This will come with the bushing for the tripod, The 3/8-16 bolt for most ballheads and the adapter plate to attach the deathgrip to Arca-Swiss. This is for if you have your own ballhead but want to be able to attach the deathgrip to it if desired.
Bog Deathgrip Adapter Plate and Screws Only $45: This will come with the adapter plate and 4 screws only.
Bog Deathgrip Bushing and Bolt Only $40: This will com with the bushing and bolt only. This option would be great for someone with their own ballhead and no desire to be able to reattach the deathgrip.


I also have small plates with the standard 1/4-20 screw. If you have any accessories that would benefit from a custom printed fixture that would allow you to attach it to an Arca-Swiss plate, which could then be put on a tripod or something else please send me a PM and we can figure something out.


Items other members have requested

Amp Annealer Bushing Die Holder And Organizer Case Length/Headspace Gauge Organizer Hornady Comparator Organizers Bullet Pullers Expanding Mandrel Organizer Trimmer Brass Catchers Giraud Trimmer Organizer Hornady OAL Organizer K&M Neck Turning Organizer Loading Trays Primer Tube Holders Shellholder Racks WFT Holder AR Upper Hanger Bog Deathgrip Tripod Ball head Area 419 Funnel Organizer Henderson Trimmer Organizer

Id like to order the kit for my death grip

 

[boatmanxxx]

pm’d you

 

[Tbraginton]

Sent you a PM for a full kit and an inquiry regarding an additional accessory plate

****UPDATE***

****I have been working on a printed bushing to replace the aluminum one for a few reasons. Main one being availability, I can print these like any of my other items so sourcing is not an issue. I can also pass the cost savings on to you guys and a little more weight reduction. I will be working on a printed adapter plate in the future also. I wanted to make sure the integrity and strength were both still very sound so I adjusted materials and design until I got it right. ***** There will be nothing new to installation, a dab of Loctite is still highly recommended on the ball head bolt. Just snug it up good, no need to over tighten. There are some variances in the BOG castings so you may hear a slight pop as the lip in the bushing pops over the casting but its fine and expected on some as I keep the fit fairly snug on the bushing.

I have also added an eyebolt addition you can use to hang equipment from. When you purchase it just let me know if you want the eye bolt or regular bolt.

For installation of the eyebolt you will install the bushing then slide the eye bolt up through and tighten fully into the ball head until it bottoms out. Then loosen the eye bolt 1 full turn and lock the nut down while holding the eye bolt from turning if necessary.



I have made up a few ball head conversion kits for the Bog Deathgrip Tripod. I tried to keep the price down as low as possible while maintaining good quality equivalent to the Bog Tripod.

- Prices shipped TYD.
- *** Continually making them as requested. I will inform you of any excessive backlog.
- There are 5 options.

The ball head is rated at 33 lbs and has 360 degree rotation (lockable) base in addition to the ball head and the ball head is lockable and adjustable for tension. This will accept arca-swiss style devices including the numerous picatinny to arca and such items on the market.

To install you would have to remove the one bolt holding the deathgrip to the tripod. Once you do this the bearings and bushings (you will not need these any longer) will come out. You will end up with a hollow casting as seen in the images. Once you have this you can insert the aluminum bushing from the bottom, then insert the new bolt through the bushing and install the ball head onto it. I recommend a dab of Loctite on the bolt before installation.

If you want to use the deathgrip that you just removed you need the kit with the adapter plate. This plate with the 4 supplied screws will attach to the deathgrip head and can then be locked into the arca-swiss ball head.

This entire assembly weighs ~15oz, you will be removing ~8oz to install. So in total you will add about 8 oz to your setup, plus any additional items you decide to add.

Bog Deathgrip Tripod Ball head kit and adapter plate (full kit) $110: This will come with the ball head, bushing and 3/8-16 bolt to attach the ball head. In addition this will come with the adapter plate to attach to the deathgrip that can then be placed into the arca-swiss ball head.
Bog Deathgrip Tripod Ball head kit only $95: This will come with the ball head, bushing and 3/8-16 bolt to attach the ball head.
Bog Deathgrip Bushing, Bolt and Adapter Plate Only $55: This will come with the bushing for the tripod, The 3/8-16 bolt for most ballheads and the adapter plate to attach the deathgrip to Arca-Swiss. This is for if you have your own ballhead but want to be able to attach the deathgrip to it if desired.
Bog Deathgrip Adapter Plate and Screws Only $45: This will come with the adapter plate and 4 screws only.
Bog Deathgrip Bushing and Bolt Only $40: This will com with the bushing and bolt only. This option would be great for someone with their own ballhead and no desire to be able to reattach the deathgrip.


I also have small plates with the standard 1/4-20 screw. If you have any accessories that would benefit from a custom printed fixture that would allow you to attach it to an Arca-Swiss plate, which could then be put on a tripod or something else please send me a PM and we can figure something out.


Items other members have requested

Amp Annealer Bushing Die Holder And Organizer Case Length/Headspace Gauge Organizer Hornady Comparator Organizers Bullet Pullers Expanding Mandrel Organizer Trimmer Brass Catchers Giraud Trimmer Organizer Hornady OAL Organizer K&M Neck Turning Organizer Loading Trays Primer Tube Holders Shellholder Racks WFT Holder AR Upper Hanger Bog Deathgrip Tripod Ball head Area 419 Funnel Organizer Henderson Trimmer Organize

 

[Jamie0700]

I would like a full kit. Please email [email protected] an address so I may send funds and a return address for shipping. Thank you, Jamie Storey. 912-614-2110

 

[TexJSaenz]

PM’s you. Would like a full kit. Jaime

 

[TexJSaenz]

Full kit. Please call 214-402-1790. Thx jaime

 

[STI_1911_Guy]

Just getting caught up back up, everybody should get a message here soon. Thanks.

 

[SNIPER.SGT]

Hello Sir, I too am interested in a full kit. Just purchased a new bog tripod and the swing is terrible! Please contact me via email at [email protected] for details. Thanks so much.........Randy McFarland aka Sniper.Sgt

 

[SNIPER.SGT]

Hello Sir, I too am interested in a full kit. Just purchased a new bog tripod and the swing is terrible! Please contact me via email at [email protected] for details. Thanks so much.........Randy McFarland aka Sniper.Sgt

Just sent payment via Zelle. Texted my return address also………Please send quickly - I can’t wait! 🏜

 

[Kerbow01]

Sent a PM on kit info

 

[Tbraginton]

Purchased the full kit and couldn’t be happier! Easy install and brilliantly simple design.

If you’re looking to take a lackluster tripod and make it actually live up to its full potential look no further!

 

[David_Med]

Google brought me here, would like to buy the "Bog Deathgrip Bushing, Bolt and Adapter Plate Only $55" kit.

I've been searching for a way to modify my death grip for a while now.

LMK how you want payment and address. I'll check PM's in a couple days if I don't see a reply here.

Thanks!

@STI_1911_Guy

 

[STI_1911_Guy]

Google brought me here, would like to buy the "Bog Deathgrip Bushing, Bolt and Adapter Plate Only $55" kit.

I've been searching for a way to modify my death grip for a while now.

LMK how you want payment and address. I'll check PM's in a couple days if I don't see a reply here.

Thanks!

@STI_1911_Guy

I will send you a PM with payment details. Thanks

 

[STI_1911_Guy]

^

 

[DONUT77DONUT]

I would like to buy the full kit. Please email how to do so.

 

[Michael Wagoner]

PM’d wanting a full kit. Let me know the payment process and lead time. Thanks

 

[Brad_Utterback]

PM sent, would really like to buy full kit.

 

[Smith10mm]

I would like the full kit, send me your payment details, thanks

 

[Cableman72]

Looking to buy a full kit, need payment information please. Thanks

 

[MaxG66]

PM sent.

thanks!

 

[EzGoingKev]

Looking to purchase the whole kit. Please PM me with the details on how to proceed.

 

[Rhino0228]

Send me info looking for full kit I messeges you

 

[Redfoot Ranch]

Sent you a PM on LRH

 

[jerdebson]

Watching. Really interested in maybe two of these.

 

[Brad_Utterback]

Watching. Really interested in maybe two of these.

I just purchased two more, I highly recommend

 

[ataylor-419]

I would like to purchase a bushing and plate. can you send me payment details?