Cadex Defence, flaunt it if you've got it!

[Yaremkiv]

View attachment 7796320

My current cadex set up...

Lonepeak action
Brux 28" barrel
Competition chassis
Tt diamond
Gen 2 razor
Custom desert sand cerakote
Chambered in .300 norma mag

She's a hammer!

I put an MDT Adjustable Grip on mine and that really done did it for me.

 

[TacticalPlinker]

I put an MDT Adjustable Grip on mine and that really done did it for me.

I'm thinking about getting the new Cadex Vertical grip from the STARS Pro chassis . There's a part number on it.

 

[Salad_shooter]

I put an MDT Adjustable Grip on mine and that really done did it for me.

For some reason I just don't like the feel of the verticle grip so I run the hogue style grips on all my junk.

 

[Mareshow]

I’m interested in that Seven Stars chassis rifle but I just heard back that msrp is $5600 Canadian pesos for it…. Yikes that’s steep for a 223

 

[Eric32]

$5600 for the chassis or the whole rifle?

 

[Mareshow]

$5600 for the chassis or the whole rifle?

Whole rifle, the covert version is $5750. My guess is the chassis will be anywhere from $1500-$1800 CAD if I were a betting man. Don't really know if there's any competition for it though in 223 unless you go custom?

 

[Harry_19]

It was pretty cool when I was going through the 2022 Cadex catalog and saw a picture of my rifle under the Light Competition Chassis section.

 

[Eric32]

Whole rifle, the covert version is $5750. My guess is the chassis will be anywhere from $1500-$1800 CAD if I were a betting man. Don't really know if there's any competition for it though in 223 unless you go custom?

Not unless the ATX comes out in 223rem

 

[dogman]

Nice fit for a factory Rem 700 SPS Tactical 223. First range trip tomorrow.

 

[Simia Dei]

Is anyone using AW mags in a cadex chassis with a non-cadex action?

 

[TacticalPlinker]

Who here SLINGS their Cadex ? If so , what brand sling are you using and how are you attaching?

TP....

 

[dogman]

I've got a padded VTAC sling with QD attachments. I ordered the QD mount for the front of the rifle. The rear already has them.

 

[MPrimo]

I did the same ... I try to avoid slinging it though as mine is a heavyweight.

 

[Eric32]

VTAC Padded sling for mine

 

[Simia Dei]

I just bought a CPS as an impulse buy, can you run MDT mags with a Cadex R7 action?

 

[TacticalPlinker]

I just bought a CPS as an impulse buy, can you run MDT mags with a Cadex R7 action?

I'm curious as well

 

[THE Flapjack]

Some great photos of the Cadex chassis, so thought I'd post my latest build.
33XC, Stiller single shot TAC338 with a 34" Bartlein/ tacomHQ barrel topped of with a March 6x-60x56 Genesis
My own design muzzle brake, based on a variation of David Tubbs 5Star. Took a 5 axis CNC to make it. The spacer I designed was to let the tacomHQ breath.
Only put 18 rounds down it so far, the UK is currently importing various storms from the Atlantic.
I'm using the Cadex 20MOA rail rather that the one from Stiller but I have machined the front of it so that there is no contact with the front chassis rail.
Choice of two bipods, the Fclass Products modified Phoenix and the Fortmeier depending on the discipline.

I have two 37XC and two 41XC Bartlein/tacomHQ barrels in the pipeline (why? because the 33XC probably has a half life of 750 if I'm lucky!) but at 2" OD, they won't fit the Cadex chassis.
Looking at the Mirage ULR chassis for these. Anyone with experience with the Mirage chassis?

 

[hardknock]

Nice build - does the stock fold over that bolt knob pictured ?

What height scope mount is in the photo? Trying to decide what height I need for an ATACR 7-35.

 

[THE Flapjack]

What height scope mount is in the photo? Trying to decide what height I need for an ATACR 7-35.

Hi,
See photo for answers to Bolt/Fold and scope mount.
Note the measurement is approximate (± 1/16) and it is from bolt C/L to the 20MOA rail at the TIP of the arrow.
Hope this helps.

 

[Conqueror]

That is a wild looking rifle.

 

[Simia Dei]

Finally picked up the CPS. I'm bloody impressed by the quality of the rifle.

 

[hardknock]

Have a Lite Comp with ATACR 7-35 on the way, was wondering if I should get the Spuhr 4007 1.5" or 4006 1.35" to clear the objective lens?

 

[Yaremkiv]

Have a Lite Comp with ATACR 7-35 on the way, was wondering if I should get the Spuhr 4007 1.5" or 4006 1.35" to clear the objective lens?

This might help. Its a Razor HD Gen2 4.5-27x56 in a Spuhr 4602 (20 moa. 1.5") sitting on a Lite Comp

 

[Lost_Phil]

Have a Lite Comp with ATACR 7-35 on the way, was wondering if I should get the Spuhr 4007 1.5" or 4006 1.35" to clear the objective lens?

You are going to want the 1.5" high and I would look at the ARC M-Brace Mount. It's a work of art like the Lite Comp chassis you have.

 

[Zane777]

375 Enabler with cadex chassis and action. Build by Insite arm, one of the best gun smiths here in Canada.
Can’t wait to do some load test.

 

[hardknock]

Finally finished my build. Cadex Lite Competition Chassis, Ulitmatum Deadline Action, International Barrels 26” 300 PRC 1:8, NF ATACR 5-25 x 56 Scope, Spuhr Mount, Triggertech Diamond Trigger, Cadex Falcon Bipod, Cadex MX1 Brake, MDT Vertical Grip, GRS Bag Rider. MDT 300WM 3.850 CIP Mag. MDT M-LOK Weighs.View attachment 7239317

what height is the Spuhr?

 

[Harry_19]

what height is the Spuhr?

It’s a Spuhr 4808, 44.4 MOA, 1.73” high. with the 20 MOA rail on the Deadline I have 35.5 MIL of elevation available in my ATACR.

 

[Simia Dei]

For anyone interested, the short action MDT mags work well with the Cadex R7 action

 

[Simia Dei]

View attachment 7796320

My current cadex set up...

Lonepeak action
Brux 28" barrel
Competition chassis
Tt diamond
Gen 2 razor
Custom desert sand cerakote
Chambered in .300 norma mag

She's a hammer!

Mate, can I request another pic of this from the other side?

 

[Salad_shooter]

Mate, can I request another pic of this from the other side?

Sorry for the poor lighting. I have a tbac magnus sitting in jail that will call this rifle home eventually.

 

[DDGKunia]

Hey a question of two for you guys.
Does the Zeus action work in the light strike chassis? If so where can you get the top rail with rail under it to mount? Similar to the surgeon.
Is there any way to order the lite strike with a different stock aka the pro stock?

Thanks

 

[Cadex Defence]

Would someone explain the pros and cons to the 32" verse 29" barrel length on the 50cal tremor
besides 3 inches. LOL
@Cadex Defence or anyone else

We had a lot of people ask for it... we do see slightly more speed and of course a little more weight out front.

 

[Cadex Defence]

Hey a question of two for you guys.
Does the Zeus action work in the light strike chassis? If so where can you get the top rail with rail under it to mount? Similar to the surgeon.
Is there any way to order the lite strike with a different stock aka the pro stock?

Thanks

We are working on the Pro folder to be on all rifles and as a upgrade as well. we have yet to have a Zeus action in the shop for test fitting

 

[StaMic006]

Factory R7 LCP in 6.5 CM. Waiting on my 300 NM Kraken.

 

[DeathBeforeDismount]

Is anyone running the ELR Arca fore end rail on their Cadex?

I have a TAC338LM coming in and not sure if it will fit or interfere with the barrel.

This one: https://cadexdefence.com/store/elr-bipod-extender

 

[StaMic006]

looks like it will fit the CDX-30/300/33, CDX-MC Kraken and all chassis with the 10-32 fore-end, plus the CDX-40 and CDX-50 with the ¼-28 thread.

I took that from a Cadex post in another thread.

 

[DeathBeforeDismount]

Yea I get that. But with a 27" barrel and 10" of rail, that extender is like 17" long and looks like it will almost touch the brake just mocking it up. Does anyone have one?

 

[StaMic006]

Based on what I see I think there will be enough of it set back on the rail to allow for ample clearance. I plan to order one for my Kraken.

 

[DeathBeforeDismount]

View attachment 7855226Based on what I see I think there will be enough of it set back on the rail to allow for ample clearance. I plan to order one for my Kraken.

That is a 50 cal with a 36" barrel. They dont have any picks on them mounted on a dual strike or field tactical. If anyone here has one, please post it.

 

[StaMic006]

I thought the longest .50 cal bbl was 32” on their stock rifles.

 

[DeathBeforeDismount]

I thought the longest .50 cal bbl was 32” on their stock rifles.

The picture is actually a 40" barrel.

Single Shot ELR configuration - 40" barrel

 

[StaMic006]

That would be a nice backpacking rig…

 

[hardknock]

Has anyone installed a top NVD rail on the Lite Comp? Wondering how much of a process it is/what that looks like.

 

[hardknock]

This one

What chassis was this? Did you install that top pic rail?

 

[BuildingConceptsllc]

What chassis was this? Did you install that top pic rail?

It was a lite strike. No, the holes don't quite line up with an origin action. That was the issue. I sold it

 

[DriverDiver]

First time out with it to 1050 yards

 

[TacticalPlinker]

Anyone recommend a quality bore guide for the Lite Comp in 6.5 Creedmoor ?

Thanks !

 

[StaMic006]

Anyone recommend a quality bore guide for the Lite Comp in 6.5 Creedmoor ?

Thanks !

Possum hollow. Call Rhys. 260.377-9715

 

[KZP]

I designed some 5lb chassis weights (10lb total) made of brass with oxide finish to fit on the T-50. Bolts are free floated, only the lugs connecting to chassis take impact. Made with the help of Sniper's hide members @JimmyJr & @JBoomhauer. Finally got to try it last week, reduces recoil from painful to fun. I let a few other shooters try and they thought it was very reasonable to manage. @Cadex Defence needs to make a factory version of this as I think the rifle is way too light for long afternoons of shooting at the range.

 

[Simia Dei]

Is the Covert available with no can? (For those of us in locations where common sense is illegal)