DT problems?

deersniper

Protecting the Sheep
Banned !
Minuteman
  • Feb 22, 2007
    13,709
    19,964
    Northeast
    Anyone have problems with the bolt binding on a DT? My bolt binds and eats at the raceway. Also it appears the skins have shifted. I have to put the Allen key in at an angle to change barrels. Any ideas?

    <a href="https://ibb.co/jHuFCa"><img src="https://preview.ibb.co/etqoXa/image.jpg" alt="image" border="0"></a><br /><a target='_blank' href='https://imgbb.com/'>upload link direct</a><br />
     
    Last edited:
    http://imgur.com/a/teF4q

    I would post pictures but apparently all the photo sites suck now.
    [IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/preview.ibb.co\/etqoXa\/image.jpg"}[/IMG2]

    upload link direct

    [IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/preview.ibb.co\/bwggJF\/image.jpg"}[/IMG2]
    [IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/preview.ibb.co\/hw13Xa\/image.jpg"}[/IMG2]
    upload link direct



    upload link direct
     
    Last edited:
    Try removing your barrel and when re-inserting it, lock the bolt before you re-torque the setscrews. Sounds like your barrel is not set into the chassis properly.

    Todd
     
    Thanks. I already do that though. The AI v DT thread OP had the same problems with eating the reciever so maybe my new bolt carrier is just wearing in.

    Anyone know now if the skins have eccentric holes and need to be adjusted? They must have moved because my barrel clamp screws used to line up with the skins.