looking forward to the tripod class also, you are putting out so much info, i really appreciate the time your putting into this.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Post any issues in the thread below or reach out directly to support!
View thread Contact supportwhat diver needs to do is put this in a book, ill buy 2@Jack Master some of this would be great as links in you list you created.
Please share when you do, this kind of discussion is awesome.Really appreciate the information. Most of my shooting has been from the prone or from a barrier of some sort so I am new to shooting from a tripod. I'm actually still waiting for my tripod to get here so I can start practicing but really looking forward to applying this.
Will do!Please share when you do, this kind of discussion is awesome.
Tripod Tips - Field Based
You need to be signed in to see the images with enough detail to read the information contained on them.
There are a lot of ways to adjust and use your tripod, many of them are carryovers from a decade ago when we used skinny leged aluminum 055 Manfrotto Tripods with shaky center columns. These tripods required a lot of shooter input and even more practice. Loading hard into the tripod, using a reversed hand on the legs, and using slings to stabilize those shaky beasts, was a needed skillset. Fast forward to today, and the tripods are made of stiff and fat CF (carbon fiber) legs, with a robust Apex/Canopy/Base (the part that connects the legs all together), and almost shoot themselves. In the interest of transparency, I am assuming that you've made the jump to a modern, high-quality CF tripod. If you're still using something that is designed similarly to the old Manfrotto 055, even if it is CF, some of the tips might not work for you. The tips are field-based, some of the positions hasty (made in the interest of speed or quietness), tailored to a match like ours with angled shooting positions and what you might encounter hunting in the hills. I am not covering tripods as rear support like you might find in a PRS/NRL styled match.
I am not attempting to teach people how to shoot from a tripod, everyone on youtube is doing that, but rather show a few tips to consider if you are interested in increasing your speed or reducing your wobble zone when shooting from a tripod. Your final body position is going to be unique to you, maybe your hips are a bit less bent, whatever, but if you can grasp the ideas, I believe it will be helpful. Even if just one tip saves you a few seconds, it might make a difference in a hunt or during a field match. Any time you save, or complexity you remove from your tripod set up in the field, allows you to use more of your brain to problem solve, break a better shot and make your outing more enjoyable.
Tip 1: Keep it simpleSo simple, but few seem to do this primary operational step as efficiently as they could. When deploying your tripod to a standing position, extend the lowest leg fully first, then work towards the head. This keeps the tripod adjustment area in your control hand in front of your body and keeps you from having to shuttle it back and forth, reverse the process to stow. Here is a spoiler alert for Tip 2; leaving the lower leg non-extended for stability, is a throwback idea and not needed with today's larger legged, high-quality CF tripod's. It will come back and bite you with a time penalty if you later need to adjust the lower section of the leg.
Note: I am purposefully going slowly in this example, so that it is easy to see the concept.I am loosening both leg locks but retain a bit of finger pressure on the middle section by holding the lower leg-lock. As the lower approaches full extension, I release the tension on the leg-lock as I continue to pull on the lower leg while I simultaneously lock the lower leg. My hand is already at the upper lock, so I fine-tune my height and lock the leg. While this is only marginally faster, it does keep the tripod from moving all over and contacting brushes etc., a value in some situations. Setting up for kneeling is of course much simpler and faster, as is setting up the tripod only as a rear support.Tip 2: Adjust from the topAll micro height adjustment, especially if a rifle is on the tripod, should be done with the uppermost leg section. All other legs need to be fully extended before the top leg section. I can't tell you how many times I have seen a person with the rifle on the tripod, realize they need more height adjustment, dangerously, and slowly try to perform a three-handed change because the only leg available are the ones at the bottom. The chance of dropping your rifle, having to take your eyes off the target, and just being ultra-slow is not worth any perceived stability enhancement with our modern large legged CF tripods.
It is always hard to adjust up with a gun on the tripod. You must remain in 100% control of the rifle.Below is not the way to do it.
If you are using the middle legs fully extended and you need extra height, the INCREASE adjustment must come from the bottom leg, and now it is a complete mess, and you'll no longer have control of the weapon system.In truth, you generally only have to increase the height on a single leg. If you only had to adjust a single leg UP or down, the two rear-facing legs are easy to reach, with the shooter still facing the target. The safest way is to remove the gun. The videos adjusting all the legs are to illustrate the point.Choose a leg height that works in multiple positions. Many people might be surprised that standing, kneeling, and sitting can share the same leg adjustments. Your tripod may only accommodate two of the three, but finding that sweet spot will save you a bunch of time. To do this, extend all your legs; adjust only one TOP section to find your "perfect standing height." With most 3 section tripods, simply collapsing the remaining fully extended legs will result in a stable kneeling position. Often then just widening the legs by unlocking the leg locks will work for a seated position. The idea here is that standing is the most critical to get correct, and the other two shoot well with more flexibility. If you find time to micro-adjust the kneeling or sitting, it should be so close already that it takes little time. With a bit of imagination, you can see that setting up with the legs super-wide, legs extended for a seated position, is really stable and perfect for a day at the range or maybe from inside a Hide. But getting in and out of that position to shoot super-wide seating, might take more clock time than it is worth. Vegetation and topography also can limit the ability of super-wide setups. If you can find a set up that works for standing, kneeling sitting, you'll be surprised how fast you can go between them.Note this is my Son on my gun, the LOP is a bit long, but most importantly, these are hasty positions. Let's say you set up too high and need to get lower to see through a loop. If you have time, you could easily fine-tune the legs.Tip 3: It hangs in the balanceIt's all a balancing act, generally, keeping your gun as close to the magazine well as possible without causing lever or mag interference on one of the legs, is going to be close to the balancing point, and that is what you are after. It is generally the most stable and a bit more resistant to the shooter's erroneous input, as the shooter side lever arm is as small as can be. But there are other reasons sometimes not considered.For those that run their mounts far forward of the mag well, they'll get more height variation with significant angle changes. With my match rifle and my typical standing setup, by only moving my legs together and straightening my back (while not ideal), allows me to shoot from approximately -21% (downhill) to +32% uphill on a knee as the butt of the rifle swings 19" when completing its arc. On that rifle, mounting just a 6" forward creates 5" more vertical movement, resulting in 21% less range of motion.Tip 4: Mark your stuffAs simple as this sounds, this is a timesaving measure that takes almost no time to accomplish. Once you've found your perfect standing height as described in tip 3, Get a white paint marker or silver sharpie and clearly mark the leg position as shown in the image below. I use "arrows" because they are fast and easier to know where you are; even the mark is not fully exposed. You can make multiple marks if kneeling requires an adjustment. You can also make a mark for your Binos that's usually the very highest position someone needs; in my case, I use a second mark to use for the front leg, see Tip 6.The paint marker shown is from C.H. Hanson and lasts a long time.Tip 5: You're HighPeople often set up higher when standing than they should. Make sure even with your feet spread at least shoulder-width wide, with a nice bend at the hips so that your back tilted forward and all principal body parts square; you are comfortable on the gun. An excellent place to start is just about with the top of the tripod at sternum height. As an individual, you'll need to experiment.If you set up too high, you'll lose much of your range, especially if you need to shoot at an angle lower than you planned for during your set up. See Tip 3.Tip 6: Don't work so hardLower the front leg position and let the tripod do more of the work; this enables the shooter to load a tiny bit less, and reduce the cheek pressure required, thus making the shot more stable. It has the added benefits of changing where the support hand rides; rather than reversed on the legs, it can remain on the head for rapid target adjustment while reducing the reach, keeping the shoulders a hair more square and less tense. With proper body position with your feet wide, hips bent forward, feet, hips, and shoulders square with less tension on the gun, your wobble zone will decrease, and your impact and miss identification will be reliable, and the tripod will not jump. You will really have to experiment and practice with the correct leg position for stability, amount of pressure, and balance of recoil management, and a light hunting magnum is going to take more force than a heavy match gun. Admittedly, it is a tip that takes a bit of practice.The scale test was on level concrete to provide a fair comparison.Notice the angles of the rear legs and the height reduction of the front-facing leg in the right side image. One the left side, the tripod having all legs with the same adjustment as most people set up; my match gun averages about 6LBS of force pulling straight back along the bore axis to lift the front leg. With the change suggested, it takes about 10-11lbs, Kneeling 7lbs vs. 14lbs. The point being, if you experiment, you might suddenly find yourself with less wobble and better POI tracing. Both pictures have the gun level. A 40% improvement is nice, but it is crucial to acknowledge that with a leveling base, you may not have enough headroom to utilize this suggestion. A ball head guy that takes the time to run the apex perfectly level (I do not) will lose the pan feature of the base; but see the last image in Tip 8.
In the videos below, both guns are shooting about 3100fps and using the suggested leg arrangement. Obviously, you can load into the gun much harder, but I wanted to show the extreme of almost no shooter influence, eliminate the wobble while simultaneously illustrating just how much the rear legs being more angled (lower front leg) help.
Match gun, ultra-light shooter load & input, and can easily see the impact. Watch the front leg.
Lightweight Carbon Fiber barreled Hunting Magnum, you can see the impact, but more shooter input is needed. If you've shot a lightweight hunting magnum, you have an appreciation for how much work this tripod mod is doing. The front leg does not hop and relocate; the rear legs bend to absorb recoil. Make sure you use a good tripod!
If you have a leveling base or that ball head that you feel that you must use the pan feature, you can keep the apex level and accomplish some recoil mitigation by rear-facing a leg to 5 or 7 o'clock (hand dominance dependent). This will take more practice; the gains are smaller, and you will need to be careful that you are not letting the tripod hop. The school of thought is that the recoil can spin if the back legs are not perfectly perpendicular to the bore axis. This is true if all other parts are not squared away. Strangely you'll get more hop with the standard method, especially if you lock-out your support elbow and stiffen your shoulders as some guys recommend. Each technique has disadvantages; all could fail if a total system, implementation, and practice are wrong. All the ways are also useful if mastered.
This is an example of groups from standing position on a tripod using the suggested techniques. Standing tripod on RRS TV33 is the lower-left group, the control group was shot prone and the upper left group.Tip 7: Work the anglesOn an angled slope, not only do you want to adjust the legs to be at the correct height, but often will run out of adjustment, especially if shooting from a lower position. Don't forget to use the additional angles the leg catches at the apex provide to enhance your tripod's flexibility. It's often better to reduce the effective height of a leg by actually extending it outward, by unlocking the apex leg lock and drastically opening up the leg. The mistakes people seemed to make at our last match, was becoming confused with the initial setup height.When shooting from a slope set up higher than you think. Because you probably can't set up your body as stable as you can on flat ground, sitting is usually hard or impossible from some of the positions. When shooting downward, modify the above lower, and when shooting upward, modify your tripod lower.On a downslope, the shooter on the uphill side, you need to set up higher than you might think because the distance where the gun mounts, with the length of buttstock, moves toward the slope as the slope rises. See the image in Tip 9. When shooting on a steep uphill, the opposite is true, but you're not going to be stable sitting on your ass. The same is true for a steep sidehill position; you'll need to modify your legs and, in turn, your position, to keep from sliding down the hill.Tip 8: Dressed for speedSling your tripod, so you are ready; this might be in the dead space just before you anticipate your final stock, or help when moving from the staging area to the FFP, especially if they happen to be far apart. Extended tripods are hard to carry, even harder if you need to move through, over, or under the brush, as you approach your FFP. Anything you can do before you move to your final stock, to stay quiet and speed the setup will be helpful. So, if you can preset your primary adjustment legs as illustrated in Tip 2, and easily carry the tripod slung either under your arm or like your rifle, you'll be one step ahead. If you expect to stand, full extended also works well with an underarm slung carry. RRS makes flush cups for this hands-free purpose.Left image: Here is an example, although not as step using what was shown in Tip 7. When I set my gun up for my brother-in-law (my tags were already filled)Center image: Packed for a hunt preset to kneeling or standing by simply extend the lowers 100%. For a general pack-in, I'd have it collapsed and the rifle in the Kifaru Gun Bearer.Right image: On the approach to a stock I sling the tripod, sometimes, fully deployed like the left image. I sling it horizontally, so it doesn't hang on bushes, or overhead vegetation, especially when on your hands and knees. The gun would then also be off the sling and in my hand. The orange tape on the sling is used to show how I tape all metal and plastic parts that might make noise.Tripods are changing the game and worth taking on your hunt.Left image: Here is an example, although not as step using what was shown in Tip 7, the first and second image shown. I set my gun up for my brother-in-law (my tags were already filled), The set up was fast; I set up as low as I could from a modified kneeling position and opened the apex leg lock on the uphill side. Of 6 Elk taken on that trip, this was the lowest setup we were able to shoot; no prone opportunities were available the entire trip. The gun is the same magnum in the video in Tip 6. The shot was over 900y, and it dropped instantly.Center image: This is a good example but not unique; you need a strategy for going over and under brush especially if you are adding in a tripod. Both your rifle and tripod may need to be horizontal at times. Anything stilling above your pack will hang up, even when you are your knees or sliding down the very steep hills on your butt. Max (on the hide) is a tall guy and retrieving an Elk. He has been hinting in this BLM area for 20+ years and is simply amazing.Right image: In Tip 6, I made this comment, "A ball head guy that takes the time to run the apex perfectly level (I do not) will lose the pan feature of the base." Well, while "movers" can travel a predictable path, most animals do not. This pig was running at full-gate, my son lead it with a crazy lead using the Anvil 30 at about 400y. It did a front flipped and died. The point is don't be so worried about leveling your apex and using a pan function; you'll get the job done faster and maybe more stable using some of the tips where the apex is NOT level.Tip 9: It's easy to come downBy default, it is always easier to set up the tripod too heigh, and micro-adjust down, or for that matter, go from standing to kneeling, than it is the other way. On your range or flat ground, your height marks will always be useful, but once out on an untested slope with untried angles, that will no longer be true for all the legs. Going from the gun setup for kneeling to standing, is really hard, the other way almost manageable.
The main takeaway here is that this method allows you to keep control of your gun "if" for some reason, you need on the go from standing to kneeling after making the mistake of having a weapon deployed. This is anything but elegant or something I'd suggest unless you had no other choice.Last year it seemed shooters set up their tripods before they found all the targets. Many of them set up in the most stable positions rather than spotting and shooting from a more reasonable level. They often ended up timing out trying to adjust their tripods back to a standing position. See Tip 2 to see how much harder it is to come up with a rifle on the tripod. In the image shown, the tripod is so low, see the "red arrow" in the image, that the shooter would almost have to lay on his back to get behind the gun.Tip 10: See what your spotter seesWhen glassing, especially with a teammate, don't set your rifle to low until you know you can see the targets from your intended height. Vegetation, ridges, or slight ground height differences could create dead space and hide the target even though while glassing standing, the target was visible. The same can be said the other way if your shooting under or in trees. If your glassing by yourself, the same principle holds true. If you plan on shooting seated, you might as well glass from that same height or decide to set up your gun higher to match your glassing height. If you are glassing from a position that differs from where you plan on shooting, pay particular attention to anything in your peripheral vision that might present a visual obstacle from the shooting position. If you are unsure, pop your binos off and take a quick peek from the other height.
Just like above, I saw many teams with one guy standing glassing and the shooter setting up kneeling or sitting at our 2019 match. There is no way the shooter setting up is going to be able to see at least 1 of the targets from his low position. The glassing teammate should notice that a ridge between the FFP and target, is relatively close to the LOS from his position. That would be a huge RED FLAG. The two shooters have a LOS offset that is about 5'. (side note: The RO missed that the spotter was outside the FFP before time started, this is a stage DQ in our UKD Team Match.)
The outcome:
Just a reminder, you might not even notice the benefits of some of this stuff if you are always shooting in the same place, without time pressure, mainly shooting on flat ground and know your tripod setting. If you can put all these pieces together, add in your spin and practice a lot, you'll be efficient and far less task loaded. You'll be ready when you have to set up on a funky area you've never seen while hoping that Elk doesn't walk away, or able to concentrate far more on the series of targets you are about to shoot because you saved a few seconds, or worse yet, didn't set up completely wrong in your first field match.
The thread only lets me post ten images, so I had to be as brief as I could, and I choose to pick the topics that I've witnessed that seemed to contribute to shooters struggling. Like I said in the intro (post 29), I do not have all the answers, many will have better ways to skin a cat. If you have tips or tricks that can save seconds, feel free to post them up.
Postscript:
You can really deck out your tripod.
View attachment 7312087
Although I have one, I didn't cover using a TacTable for a field match. Hopefully, @hic28 and @NoLegs24 can chime in on the use of the Able Table and maybe offer a few tips. These guys do well at team matches (so do a bunch of other shooters).
Below is a video comparison of an old school Manfrotto 055 vs. a RRS tripod illustrating the raw stability differences. (This is from a thread I did compare RRS and Feisol legs as well as head options.)
A dirty non-scientific look through my night vision shot on my pest control PCP. The purpose is to illustrate the difference in stability between a high quality set up and what we used to use. The house in the video is at 350 yards, at 14x. NOTE that my match gun is way better balanced, more substantial, and way less shaky in general.
I purposely mounted the gun and unmounted without much technique to show how the vibration, the time it takes to settle or how wind might vibrate the gun. (remember wind causes a lot of issues with vibration.)
I ran 9 steps to show instability, both the same (times below are only for the RRS video)1. Turned on to see how much vibration takes to settle. Please pay attention to the test in this area. All I did was press firmly on the scopes power button. I did not touch the gun in any other way..2. Mounting gun, getting comfortable with NPA. 0:12 –o:153a Moving to target - holding the tripod loaded on the target (note you can free recoil and be dead still on the target, but I was purposely trying to show realistic shake if your loading the gun) 0:16-0:203b Deciding on target 0:21-0233c Holding target 0:34-0:264. On mounting the gun 0:27-0:295. 1st of 2 Tapping HARD on the Butt-stock sideways to show how long it takes to settle 0:306. 2nd of 2 Tapping HARD on the Butt-tstock sideways to show how long it takes to settle 0:367 Mounting the Gun 0:408a Moving to a new Target 0:41-0:468b Setting on Target 0:479. Un-mounting the gun 0:50HINT: Play both at the same time. Turn up your sound and listen for when I hit the stock with my hand.
RRS with Anvil 30 stability, video 1 of 2 comparing Manfrotto Takes 50 seconds to complete even taking extra time, not sure what I was really planning on doing. Also, going super slow even though the gun settled.RRS Anvil test
Manfrotto 055 with center column up the match the RRS height. Video 2 of 2 comparing Manfrotto Takes 1:46 to complete..NOTE the first few seconds of this video as all I did was press the power button on the NV just like all three tests; holy smokes, there is a HUGE difference!!
Here is a link to the tripod comparison thread:
![]()
RRS Leveling heads- RRS TVC-33 & Feisol 3372 + Anvil 30 comment
My intent here is to add a few images comparing the setup of the RRS TVC-33 with the TA-3 to the TA-3 used on the 3372 and add a couple of comments about the TA-UL on the 3372 and 3342. Plus, a quick note after a ton of time on the RRS Anvil 30, my overview of the different RRS head options...www.snipershide.com
Here is a link back to the original post. You will see an index to other topics.
![]()
Advanced Marksmanship - Tips & Tricks, from Tripods to Stage Examples for - UKD Team Field Match or Hunting
See the 2021 match schedule here: https://www.avenaltactical.com/ including the next UKD Team Match, 2 PRS Pro Bolt series, PRS SW Regional Qualifier, and monthly Hunter and PRS regional series, matches. Because our match was sold out 10 months in advance, we feel we should offer a spin up...www.snipershide.com
Ya, great point. I was supposed to, but my Son was super impatient and rushing everything. My small brain could not keep up, and I forgot to video it. I'll post what I see normally taught, then see if I can get him back out so that he loads the sam between both shots. Remember, he is almost adding zero cheek and forward pressure. He is just behind the gun so that it doesn't completely free recoil, but is crazy light for demonstration.Hey Jim @Diver160651 , on tip #6, I would love to test out the shorter front leg and maybe video recoil directly from the side short front leg vs all legs the same height.
There is a lot of really good, useful information here. I picked up quite a few thoughts and ideas to implement with my own game-day planning and tripod shooting between now and November.
I have mine now with the 55 ballhead. It’s awesome and I should have bought an RRS sooner.
It’s definitely PRS/flat range oriented (and they were very up front about it). Not something I’d want to strap to a ruck for any amount of decent distance/time.
But for the use I bought it for, it’s badass.
No just any cheap sling will do. But in those images I am using the RRS flush cup QR leg mounts.Hey @Diver160651 how are you carrying the tripod their, do you have a tripod specific sling?
Hey @Diver160651 how are you carrying the tripod their, do you have a tripod specific sling?
Please share when you do, this kind of discussion is awesome.
Finally got my tripod and the range I shoot at locally opened back up so I got to make it out Saturday and get some rounds down range off the tripod. Definitely a lot different than the shooting I am used to. I spent most of the time adjusting the height of the tripod in the standing to test out what worked best for me in feeling like I was in a stable position as well as allowing enough room adjust the rifle to engage targets at different distances. My first setup was too high as I found myself almost standing on my toes to hit targets that were at lower elevation. My initial comfort zone was to get the tripod up to a height where I was basically standing fully upright which worked for one specific target but when I transitioned to other targets my position was compromised and I could not get a good position on the weapon. I found as I lowered the tripod and opened my stance a little it gave me a much larger range of adjustment to transition target to target. I definitely have a lot of work to do between now and November!
Thanks, I definitely found adjusting lower took some getting used to but I can see it has a lot of advantages. The next thing I need a lot of work with is how much I press into the tripod and gun. The more I shot I feel like less is more almost.You'll do fine, it takes a few times but then comes together.
The correct height, in my opinion, is lower than most people think.
My suggestion is to take the tripod at set the very top of it below your pecs at about sternum height. You'll still need to bend forward at the hips with your legs forming a wide solid base. Rather than lean 100% into the gun, I'll use my hand near the ball head, Anvil 30, or in the case of the leveling base, on the 4" adjustment arm below the apex, letting that hand help stabilize my upper body by lightly pressing forward on the tripod.
On a heavy match gun, you're looking to back-off until the wobble goes away, but then add back in until you and see your impacts. Just restating, were not having to take all the shakey slope out as you did on the 055s. I am not trying to "stop" the gun's recoil, just slowing it down enough to see the impacts.
Side note: Something I didn't cover and hopeful that @hic28 will get some time to explain the benefits of using a bag on the tripod rather than locking down the gun. His product, the Able Table adds a ton of functionality to the tripod game.
Todd, That's super nice to say coming from such a good shooter..
Dave,
I know you bought the NEW the RRS PRS 2 section Tripod for PRS/NRL style competition, where spotting and rear support, are the main two uses. This tripod seems to be the ticket for speed. But it would be great if it works for hunting, maybe it is just a question of working the apex locking levers more.
Can you post a couple of pictures (your living room is fine), of you standing, kneeling, and sitting using the tripod? Also, can you interest the distance from the top of the QR plate to the leg lock? When set up, my lower leg locks are 32".
My primary field position is probably, kneeling, the height of 30" to the top of the quick release when setup. I carry the tripod partially extended at the ready, at 35" QR to feet; with the front leg at 30". Simply by opening, it is prepared, for standing, I only have one set leg to work with, and they just fully extend.
View attachment 7314937
This is how I carry the tripod as the base position; maybe the NEW PRS PRS 2 section works much the same as it is already longer when collapsed.
I do not have experience with this new tripod, and you are one of the first to own it in the wild. It would be great for people to see what it sets up like fo the other positions. The more information here, the better, not everyone is hunting or shooting on funky angles anyway.
Thank in advance,
Jim
This is a great question, this match you can hike up to 2-3 miles fitting the day. Jim will follow up with excellent pictures of his kit and load out.Good read on tripod setup! I will definitely mark my tripod legs for easy transition/ deployment. Since this will be my first field/team match, any suggestions/tips for type of backpack for rifle carry and load out. I know less is more but just don't want miss out on essential gear for the match.
This is a great question, this match you can hike up to 2-3 miles fitting the day. Jim will follow up with excellent pictures of his kit and load out.
Expect to carry everything you will need, riffle, sling, ammo, dope, lrf, bino, tripod, snacks, water. Weight matters and with your ability to carry that weight, clothing, shoes, sunblock, etc. Weigh your kit and evaluate everything you and your partner will carry. Do you need 2 binos, 2 lrf, etc. Weigh your rifle too, and do these weights with the ammo you plan to carry.
You will want to practice with your full pack and rifle, is it better or easier to carry the rifle slinged, or in the pack. Some stations are close others are a hike depending on where you start.I will weigh the rest of my gear. I know for a fact that my rifles weighs 17 lbs .!!! That alone will be the bulk weight of the back pack. It will be a heavy pack including other gear. I guess need to start rucking now.
Thanks for info!
Good read on tripod setup! I will definitely mark my tripod legs for easy transition/ deployment. Since this will be my first field/team match, any suggestions/tips for type of backpack for rifle carry and load out. I know less is more but just don't want miss out on essential gear for the match.
Good read on tripod setup! I will definitely mark my tripod legs for easy transition/ deployment. Since this will be my first field/team match, any suggestions/tips for type of backpack for rifle carry and load out. I know less is more but just don't want miss out on essential gear for the match.
does each shooter in a team need a tripod ? i have 1 tripod for a rifle and a smaller 1 for binos and range finder, would this work for a team to shoot the match?
me and my son are new to precision rifle, we are not going to be knocking on the door of the top 20,
does each shooter in a team need a tripod ? i have 1 tripod for a rifle and a smaller 1 for binos and range finder, would this work for a team to shoot the match?
me and my son are new to precision rifle, we are not going to be knocking on the door of the top 20,
speaking of time management , do most teams split time in 1/2 ? or let first shooter finish and second shooter gets what time is remaining?
if a shooter is struggling on a stage can he be pulled and the second shooter pick up where the first shooter left off?
sorry for the stupid questions.