Got a long range hunting rig? Let’s show them off!

[santee116]

.280 Ackley
Brux #5, 22", Tbac Ultra 7
AG composites
Trigger Tech
Swaro Z6i
Makes a nice little bean field rifle

 

[huntsman22]

Bighorn SR3, manners EH6A bdl, 22" Proof, LRHSi 6.5 PRC

Bighorn TL3, manners EH6A, 20" Proof, LRTS, 6.5 Creed

 

[jda2631]

Bighorn TL3
Manners EH1 W/ CIP mini chassis
26" Proof 28 Nosler, throated for 195's.
AMG

 

[Mackay Sagebrush]

T3 .300 Win Mag
Harrells Precision 3 port brake
McMillan Sako Hunter pattern
SWFA fixed 10x MIL/MIL






It has accounted for a few freezers full of elk.
Typically ranges have been in the mid 400s.


Between this T3 and my short 20" barreled, light McMillan Edge stocked .308 T3, if I never bought another hunting rifle again, I would not feel the least bit handicapped.

 

[Langford]

Christensen MPR in 300wm topped with a Razor AMG 6-24

And this one is a Valhalla Rifleworks 6.5 Creedmoor, proof barrel on a 700 action, S&B Polar t96 4-16x56.

 

[Wyfox]

Bighorn SR3, manners EH6A bdl, 22" Proof, LRHSi 6.5 PRC

Bighorn TL3, manners EH6A, 20" Proof, LRTS, 6.5 Creed

Sendero or Sendero lite contour?

 

[huntsman22]

lights

 

[stello1001]

Howa 1500 6.5CM 24"
At the time, it was sporting a Tango6 4-24x50.

 

[tree man]

Bighorn SR3, manners EH6A bdl, 22" Proof, LRHSi 6.5 PRC

Bighorn TL3, manners EH6A, 20" Proof, LRTS, 6.5 Creed

I’m building the same prc with a impact
Do you mind me asking what kind of velocity you’re getting with the 22” prc

 

[huntsman22]

2910 with retumbo and 147's

 

[ChadL]

Tikka 6.5 SST, CarbonSix 26", AMG, Ultra 7 - 13.5lbs 147 ELDM @ 3000fps

How do you like the 6.5 SST?

 

[tree man]

2910 with retumbo and 147's

That’s what I was hoping to hear, can’t wait for mine to be done

 

[grinnergetter]

Where's the big stuff? My go to hunting rifle. Accounted for 2 elk, 2 bou and a 750 yard buck on Kodiak.

338 Edge
28" Lilja
Borden action
McMillan stock
Jewell
US SN-3
Seekins rings, bottom and mags

Not even close to 12 pounds. LOL

 

[samson7x]

Bighorn SR3, manners EH6A bdl, 22" Proof, LRHSi 6.5 PRC

Bighorn TL3, manners EH6A, 20" Proof, LRTS, 6.5 Creed

What do these rifles weigh? I’m considering a similar build. Thanks.

 

[DetroitRearView]

2 Blaser R8’s
300N & 338L Blaser Match barrels
ZCO 420MPCT2
ZCO 527MPCT2
Tier One 20 MOA rings
TBAC 7 Ultra
TBAC 338 ULTRA
TBAC Bipod
AREA 419 Pic rails
Ultra reliable and smok’n accurate

 

[Seandradamus]

I'll be able to join you fellas soon, mailed off my parts to Travis at TS Customs to have a 7SS spun up. Hopefully I'll get it back in month or so, and be close to 3000 fps with 180 Hybrids.

Specs:

Lone Peak Fuzion SA
Proof Sendero 1:8.25 @24"
Manners EH1
Kahles 318i

Great minds
180 hybrids at 2985 tiny tiny groups and consistent cold bore shots at 1000
9.8#

 

[QSYB]

Ruger Hawkeye long range target .300 WM

Burris XTRii

Iota rings

Just ordered a SureFire Socom 2 mini

All factory and nothing fancy but .4 groups with 210 Berger VLD’s. This is my first LR rifle, but I’m hooked and will soon be building a custom rifle.

I just got one of these on an extreme deal. If anybody has any tips or suggestions please reply or PM. Thinking of adding pillars and bedding. Still deciding which bullet to run as well. This is my first magnum rifle.

 

[jtate]

Lefthand Tuebor stainless Raider
McGowan barrel
Mesa Precision Altitude stock

 

[CaptNemo]

The Tikka / Bravo combo did a fine job with 140 Nosler Ballistic Tips and RL16.
I was invited to participate in a cull shoot to reduce the Blackbuck antelope herd on some high fence property.
The tikka handled the task easily on 3 does today, with shots at 225 ,250 and 275 yards.

 

[XTREM HTR16]

T3 .300 Win Mag
Harrells Precision 3 port brake
McMillan Sako Hunter pattern
SWFA fixed 10x MIL/MIL






It has accounted for a few freezers full of elk.
Typically ranges have been in the mid 400s.


Between this T3 and my short 20" barreled, light McMillan Edge stocked .308 T3, if I never bought another hunting rifle again, I would not feel the least bit handicapped.

Mackay, what are you using in your 300 Win mag? I picked up a used T3X in that but the magazine is only 3.38”. Not enough OAL for the 215 hybrid I wanted to try.

 

[CaptNemo]

The Tikka / Bravo combo did a fine job with 140 Nosler Ballistic Tips and RL16.
I was invited to participate in a cull shoot to reduce the Blackbuck antelope herd on some high fence property.
The tikka handled the task easily on 3 does today, with shots at 225 ,250 and 275 yards.View attachment 7151176View attachment 7151177

Added two more to the tally on Sunday with 250 and 300 yard kills.

This is a photo of one of several herds on the property:

 

[jtate]

I just sent the following parts to Justin at Spinner's for him to put together a true "unicorn" for me.

Browning X-Bolt action - left handed
Bartlein #3 .277 barrel
McMillan game scout stock

I am going to have a LEFT HANDED BROWNING HELL'S CANYON McMILLAN X-BOLT chambered in .270 win.

I have been trying to get one from Browning for the past two years without any luck. I think the one they made for Shot show and used in the catalog was the only one they made, and it sure as heck wasn't chambered in .270.

 

[Hondo64d]

I just sent the following parts to Justin at Spinner's for him to put together a true "unicorn" for me.

Browning X-Bolt action - left handed
Bartlein #3 .277 barrel
McMillan game scout stock

I am going to have a LEFT HANDED BROWNING HELL'S CANYON McMILLAN X-BOLT chambered in .270 win.

I have been trying to get one from Browning for the past two years without any luck. I think the one they made for Shot show and used in the catalog was the only one they made, and it sure as heck wasn't chambered in .270.

What twist you going with?

John

 

[jtate]

1:10 was all I could find at the time. About 2 hours after I order it, I found a Brux 1:9 for sale. Really bummed about that. Oh well, the 1:10 has been filling freezers for years.

 

[tree man]

Gradous 6.5 PRC
22” proof on a Impact
Manners EH1
10.5 lbs loaded with an Atacr

 

[vigildom7]

It ain't much but its honest work.

 

[Wags]

Mackay, what are you using in your 300 Win mag? I picked up a used T3X in that but the magazine is only 3.38”. Not enough OAL for the 215 hybrid I wanted to try.

Redsnake tactical makes a BM that accepts AI long action mags that will give you more OAL.

 

[Diablo]

300 Win Mag
McM A5 with KMW Cheekrest
Surgeon 1086 LA
Triggertech Diamond Pro Curve Trigger
Surgeon LA DBM
Obermeyer Barrel
Threaded 5/8-24 for TBAC
USO SN3 EREK ERGO
230grain Bergers
Built by Jon Beanland

 

[UT-LRshooter]

I just got one of these on an extreme deal. If anybody has any tips or suggestions please reply or PM. Thinking of adding pillars and bedding. Still deciding which bullet to run as well. This is my first magnum rifle.

Just saw your reply.

I had those things on my list as well but truthfully after messing around and finding a good load I didn’t find it necessary. Shoots a consistent .250-.400 I’m sure the errors are me. Just today I rang a 8” plate going 3 for 3 at 800 in under 30 seconds, I won’t complain about that.

I will note that it definitely likes the heavier bullets, and doesn’t like to be ran hot at least in my experiences 210 VLD for me at 2846 with 2 FPS deviation.

Since owning the rifle I have found it to be extremely uncommon and little info out about it. But I have zero complaints.

Love the trigger
Good magazine
Great muzzle brake
Nice stock (heavy though)
Great safety design
Reliable extraction

 

[UT-LRshooter]

I just got one of these on an extreme deal. If anybody has any tips or suggestions please reply or PM. Thinking of adding pillars and bedding. Still deciding which bullet to run as well. This is my first magnum rifle.

Also would like to note the Burris XTR ii has been fantastic, replaced a Vortex HS-LR that didn’t track worth a damn.

 

[Diesel65]

Rem 700 trued action
Proof 9.4 twist 26” 300wm chambered with Rhian Mantha reamer
Triggertech trigger
Manners EH1 Elite stock
Hs Precision DBM for a flush magazine
View attachment 7138906View attachment 7138907View attachment 7138908View attachment 7138909
It’s a hammer, sends 215 Bergers right at 3100 FPS at right around .4 moa.

This is my favorite so far. I feel the need to copycat you with extra 700 action laying around. That bolt knob is kickass.

 

[QSYB]

Just saw your reply.

I had those things on my list as well but truthfully after messing around and finding a good load I didn’t find it necessary. Shoots a consistent .250-.400 I’m sure the errors are me. Just today I rang a 8” plate going 3 for 3 at 800 in under 30 seconds, I won’t complain about that.

I will note that it definitely likes the heavier bullets, and doesn’t like to be ran hot at least in my experiences 210 VLD for me at 2846 with 2 FPS deviation.

Since owning the rifle I have found it to be extremely uncommon and little info out about it. But I have zero complaints.

Love the trigger
Good magazine
Great muzzle brake
Nice stock (heavy though)
Great safety design
Reliable extraction

I hadn't been on in a while. Thank you for your reply! I finally got to the range with it and ran 15 rounds of FGMM 190gr. It grouped about 1 MOA off front/rear bags. It tightened up a little off pod/bag but showed a touch of vertical stringing that I suspect is me learning the trigger. It breaks crisply but seems a touch heavy. I'll find something heavier to try next go around.

 

[6brshooter]

Aiae with tooley bart 6.5creed and lri bolt bush job. Definitely not lightweight, but I managed to climb into a hay loft to take this shot at 592yds

This one isnt as fancy as some of these customs, but its killed everything from whistle pigs to pest permit deers. Savage target action with a 20" 243 8tw criterion and bedded hs precision.

I had a fox hanging around newborn calves for 2 days, didnt like how it was acting so he got smoked.
I've got 2 loads for it, 70gr blitz kings at 3500 and 107smk at 2900. Rifle is zeroed at 275yd with blitzkings, perfect for calling yotes. Inside 340yds, no need to hold off fur. The 107 load hits dead on at 200, with the 70gr zero. Shooter has the appropriate zero range for each load, if I need to dial. Both loads at 100yds confirming zero