I know most people and hornady use H4350 for their Creedmoor. BUT It's no where to be found. I located some IMR 4350 and was wondering if that will be close and as good ?
We’re planning to start making changes bright and early on Monday so you might see the site down fir a bit, but no worries, we’ll make our changes and be back as soon as we can!
VIEW THREADYeah, if this is for the 6 creed, start at 41grs. thats plenty low enough.It'll work great.
Be advised you need to repeat load workup, starting low and working up.
I would start at 41.5grs IMR4350.So..assuming a good, established safe load with H4350 is 41 grains, then what would an IMR4350 equivalent load might be? I have a new 6 Creedmoor bolt gun and I am thinking of starting with 39 grains of IMR 4350 and a 105 JLK.
Thanks
I know it's only a 100 yards, but that load I used was pretty accurate.