You loosen the leveling base by twisting the handle shaft under the bowl, adjusting/aiming your rifle, and then tighten it back up by twisting it in opposite direction.
-
Having trouble using the site?
Contact support
Imported carbon fiber tripod (RT90C)
- Thread starter 021411
- Start date
Finally got the tripod, adapter plate from @midwestoffroad and Anvil-30 all put together. The adapter plate is made very heavy-duty and has zero flex in the system. I am very pleased with the final outcome...especially for the money spent!
Where is the best place to get an Anvil-30? Thermal optics is out for the week and shows out of stock. I got to see what all the fuss is about the anvil vs other ball/leveling heads
I think everyone is out of stock. Cameron changed his system to work with RRS live inventory last week
I ordered direct from RRS. Was on back order for less than 3 weeks of I recall. The week I placed the order they were in stock and I drug my feet a few days. When I decided to order they were out of stock but I ordered anyways.
Last edited:
Order them now!
Inside source info is saying all backorders will be finished on the Anvil by end of next week.
Inside source info is saying all backorders will be finished on the Anvil by end of next week.
Nice. What exact adapter plate (manufacturer and model #) did you use here to fit the Anvil 30 the Innorel RT90C?
It would really help if you read my comment, the adapter plate is custom made by @midwestoffroad, shoot him a PM for details
My bad. Not trying to throw shade on his work. Your post just stated that you got it “from” him. I wasn’t aware he manufactured them. Couldn’t infer that from your post without prior knowledge of the fact that he actually makes them.
Anyhow, the mount looks to have a really nice fit and finish. So good in fact I assumed it was made by a commercial manufacturer. I’d be happy to give a fellow member some business. Especially when he’s putting out a quality product. I’ll hit him up. Thanks.
Anyhow, the mount looks to have a really nice fit and finish. So good in fact I assumed it was made by a commercial manufacturer. I’d be happy to give a fellow member some business. Especially when he’s putting out a quality product. I’ll hit him up. Thanks.
He does great work and this is a lengthy thread but there are MANY posts detailing the process/products...that's how I found it
Meopta 15x56 and Kowa 664m works great on 90 with anvil.
Attachments
The concept started on post 380 on page 8 or 9. And there's a plate on about every page after that. It's been a fun Challange sending these plates out to so Many hide members. If it wasn't for making them on a old manual lathe and mill one at a time I could probably supply a even more refined and lighter product. And have done a few custom for gitzo and crux
I have one you made out of delrin and it works great.
Very cool. Glad everyone has been keeping you busy. I sent you a DM regarding getting one.
I would think a Delrin adapter would work just fine and save a TON of weight in the adapter!
So you guys that have been using the rt90c . How big a deal has the lack of ratcheting leg angle locks been .
Have you made any adapters that just have a thru 3/8 hole and an anti rotation pin for those tripods with a flat top?
I've got a tripod with a 2" flat top to it with set screws that come up from the bottom for anti-rotation, but they are at about 1 1/2" diameter and don't catch the anvil-30's little base.
Yeah I'll work on a sketch. Should be a fairly simple small part. I could make it, but I haven't messed with Cerakote yet and want it coated. No Cerakote applicators around here I don't think. What is the taper on the Anvil base?
Yeah except those might be too thick to get the 3/8" bolt sticking out the top of the plate to attach to the anvil. Would have to end up milling the bottom off to make it work. Any word on when the next batch of Anvil-30s is supposed to be done?
I am suggesting you mount the Anvil to the adapter with the 4 screws through the holes. Then you can screw it on to your tripod with the 3/8" stud, The 4 hole pattern can then possibly be used to put a safety/anti twist screw up into to make sure you cant spin it off. Ive done this on a friends tripod, just measure where the holes lined up drilled a hole in his platform, tapped it, and instant anti-twist
Should be fully out of backorder by end of next week so order now if you want to wait less time. We don't actually charge until our stuff ships. The initial charge is just a fraud authorization check and then it drops a few days later, depending on your bank.
Should be fully out of backorder by end of next week so order now if you want to wait less time. We don't actually charge until our stuff ships. The initial charge is just a fraud authorization check and then it drops a few days later, depending on your bank.
The 3 series adapter doesn’t work on this tripod. The diameter is too small on the adapter. Ask me how I know.
Only fits with my second adapter lol
Attachments
For those wanting some insight on the difference b/n the Innorel and Arctise versions of this tripod...
Amazon has the Arctise AS90C available as a Prime product sold by “USA Innorel” with approx 2 day shipping.
Amazon seller “Innorel Official Store” sells the actual Innorel RT90C. Estimated shipping is 4-6 weeks (from China I assume). I emailed them (I.O.S.) about the difference b/n these two tripods. Here is the quote from their reply:
Since I’m in no real hurry and I preferred to have the CNC version that is regarded to as being “better,” I went with the Innorel. Take from this what you will. Hope it helps someone else make their decision also.
Amazon has the Arctise AS90C available as a Prime product sold by “USA Innorel” with approx 2 day shipping.
Amazon seller “Innorel Official Store” sells the actual Innorel RT90C. Estimated shipping is 4-6 weeks (from China I assume). I emailed them (I.O.S.) about the difference b/n these two tripods. Here is the quote from their reply:
| Hello, our INNOREL RT90C has an all CNC metal adapter which is better than the Artcise RT90C. We are sister companies and the tripods are same basically. Hope helps. Regards. |
|---|
Since I’m in no real hurry and I preferred to have the CNC version that is regarded to as being “better,” I went with the Innorel. Take from this what you will. Hope it helps someone else make their decision also.
True that is larger than the 3 series its more like the 4 series we carry.
To be exact, what I was talking about above was someone putting it on a tripod that doesn't have the ability to remove the center platform and just mount it to a stud built into the top of the tripod apex. Most of the older tripods that were popular in shooting awhile ago are like that and some of the lighter weight models.
We don't have any plans in mind to make something for this larger size that is in this thread since it is being made, with what looks like a good end result and comments. We try not to make products that are already made, made well, and solve a problem.
Keep at it @midwestoffroad
ACE Professional Low center of gravity ball head 30mm w/ Picatinny & Arca Clamp | eBay
Find many great new & used options and get the best deals for ACE Professional Low center of gravity ball head 30mm w/ Picatinny & Arca Clamp at the best online prices at eBay! Free shipping for many products!
www.ebay.com
ok iknow someone here has tried one
Still liking your RT90C tripod?
Are you using it for binoculars only, or can you shoot off of it too?
What interface is needed to mount an Arca rail rifle (Masterpiece Arms BA chassis)
Thanks in advance,
George
Well thanks to this thread and a helpful suggestion I ordered the LT364C (1 lb lighter than the RT90C and slightly shorter). None of my rifles use ARCA mounts, what would be the preferred method for rifle attachment. I'm thinking the PIG Saddle attached directly to the factory leveler plate?
Thanks again for the information!
Thanks again for the information!
Thanks sir! One question I see everyone is buying an adapter you're selling. I've gone back through quite a few pages but I simply can't find where is described and it's function. Is that an adapter to use the ARCA rail system?
It’s an adapter plate that replaces the universal adapter plate that comes with the RT90C with one that is specifically designed to mate with the RRS Anvil 30 head.
Edit: See post #508 earlier in this thread for some pics of the early version of the adapter plate.
Edit: See post #508 earlier in this thread for some pics of the early version of the adapter plate.
Last edited:
There are several versions at this point, No? Depending on what Anvil 30 set up you have?
_01.png?resizeid=19&resizeh=600&resizew=600)
Anvil-30 Shooting Ball Head
OverviewThe first of its kind Really Right Stuff SOAR Anvil-30 Ball head is purpose-built for heavy equipment support from the ground up. We added our patent-pending dual clamp system able to clamp both the RRS Dovetail standard and Picatinny rails in the same unit. We also removed extra...
soar.reallyrightstuff.com
If I find the factory leveler plate unsuitable are there recommendations for a 75mm replacement?
I went back through the thread and saw the "YB-75LC" was recommended but I can no longer find the "LC" variant, only the "MP" ( https://www.amazon.com/LEOFOTO-YB-75MP-Levelling-Adapter-Tripod/dp/B0815YR5RG )
Regardless, if anyone could provide their first hand experience in swapping out their factory leveler plate with an improved one I would love to hear it. From my basic understanding it sounds like the leveler plate would be slightly more sturdy over a ball head and slightly cheaper at the same time (just not provide extended elevation adjustment).
I went back through the thread and saw the "YB-75LC" was recommended but I can no longer find the "LC" variant, only the "MP" ( https://www.amazon.com/LEOFOTO-YB-75MP-Levelling-Adapter-Tripod/dp/B0815YR5RG )
Regardless, if anyone could provide their first hand experience in swapping out their factory leveler plate with an improved one I would love to hear it. From my basic understanding it sounds like the leveler plate would be slightly more sturdy over a ball head and slightly cheaper at the same time (just not provide extended elevation adjustment).
Planning on a ST344C which has a max load of 77lbs and is about 2 lbs lighter than the 90C.
Which ball head+arca plate would be ok for mounting a sub 20lb setup?
Or this half ball 75mm arca? https://www.amazon.com/gp/product/B08GYKXT63/ref=ox_sc_act_title_1?smid=A117K1DEQYNJIS&psc=1
Which ball head+arca plate would be ok for mounting a sub 20lb setup?
Or this half ball 75mm arca? https://www.amazon.com/gp/product/B08GYKXT63/ref=ox_sc_act_title_1?smid=A117K1DEQYNJIS&psc=1
I swapped out the stock ball for the Leofoto with the quick release. So far its worked out great. It does need a little oil/Grease from time to time but mine gets dusty from riding in the side by side. Very stable though, when walking I use the tripod harness on my shoulder and just tighten the ball so the gun doesn't move.
Attachments
Here in the rolling hills I have zero need for a ball mount or other device to shoot extreme angles. This RRS quick adapter mounted directly to the leveling base has been an ideal solution for me. Works great and has plenty of movenment for shooting ground rats one minute and sparrows perched in a tree the next.
Attachments
Yeh I’m loading it up tonight to do some sparrow control on a jobsite tommorow. I’ll post in a bit.
Attachments
@demolitionman :
That does look like a decent amount of travel.
To clarify—you’re running just the leveling base that came with the Innnorel tripod, or is that the midwestoffroad base?
How quick and solid is it to get in position and lock everything down tight for a stable shot?
Last edited:
Keep searching Amazon. I ran into the same issue.
There is a “Innorel Official Store” selling the RT90c with Prime shipping. Right now they show 19 available with delivery tomorrow. That is where I got mine.
And for me, Midwestoffroad is Good to Go dude to deal with. Totally awesome helping me out.
If you need more travel a ballhead would offer about twice as much.
Here are a few pictures of my hunting setup with the midwestoffroad adapter with a RRS Anvil 30 on a RT90c. I have all the travel I could ever need for an uphill or downhill shot and it is very stable. The lever on the Anvil can be set so you can pan and tilt fast or slow and it locks up super tight. You can use it with ARCA or picatinny.
Similar threads
