Ingenuity Powder System
- Thread starter Jsstalli
- Start date
This bench would be sooooo much prettier with an IP bulk dropper 
I like your top cabinets. Do they hang on the wall or are they part of the bench?
Craftsman from Lowe’s. They hang on a plastic mounting system. Very easy. Great for Powder and brass storage
I’ve thought about it, but I get good results with the current one and I’m used to it.^and an AMP annealer
does that powder dropper bind up at all using the common stick powders?
Yes,unfortunately on just about every throw. It sticks and I have to force it through the stroke. I’m just dropping a couple of grains light and then the IP Trickler does the rest, so if it jacks up the drop amount when it sticks it’s still OK.
Last edited:
The Android version is located on the Instructions page.
The iOS version you have to be invited to.
May 2025 is the current ETA for the first 1000. Fingers crossed.
When did you place your order? Oh I guess you had your old powder thrower and using just the electronics and stuff. Nvm
Last edited:
Me too. I'm like 20 orders in.
And my (second) ATV4 arrives today. I couldn't take it any longer.
And my (second) ATV4 arrives today. I couldn't take it any longer.
Nice setup, I just pre-ordered one. Does the granite slabs help with taking vibrations and bumps out?
Correct. My autodrive sits on the same bench. Pretty much eliminates the movement. I also use sorbethane (duro 50) feet underneath.
I've got a 1/4" steel plate that sits on Sorbothane feet that does much the same thing, yeah - I can bump the bench pretty firmly and the scale doesn't register it at all
"The current estimate for the first preorders that started 12-19-23 through about the end of 02-2024 should start going out in May. If you preordered after the end of February 2024 then you will be in the second batch of production scheduled for about July. The second batch will go much much faster now that all the kinks have been ironed out in the first production run."
Ingenuity Powder System. Preorder List
This is a no obligation preorder. You will get an order number and when they are ready to ship your payment notification will go out in the order they were received. The current estimate for shippi…
ingenuityprecision.com
Looking forward to getting mine, ordered 1/24. But I can wait as I am already setup using the V3IP version.
Maybe by next shooting season we’ll have it.
Oh nvm April fools!
Seriously why is the dropper the hold up now?
Oh nvm April fools!
Seriously why is the dropper the hold up now?
If I had to guess, and that is all it is, I would guess issues getting the aluminum body CNCd. Most machine shops are heavily booked and if his machine is not running yet or was late…..
I have no doubt that the Ingenuity system will be one of the bestif not the best out there, but if I would have know it would have kept getting pushed back I probably would have just let my ATV4 order come through. I actually cancelled my ATV4 order when I last talked to Ingenuity about timelines (I think very early fall 24) and thought I was going to get my IP setup fall 2024. Preorder was early 2024 for me
Currently running manual dropper (hornady) with IP trickler using Auto Trickler electronics on an A&D to finish out the charge. And while it works just fine I figured I was only going to have to do charges that way for a pretty limited time.
at least the preorder was really just a waitlist and not a pre-pay.
Just sucks cause a lot of small businesses probably get stuck just like he is now. You create an awesome product, but you have to release some type of content about it to gauge interest before dumping big $$ into production. And then they get F’d by supply chain, material, material costs etc
IP is great on communication etc. if you've ever emailed him he returns calls and is super informative and helpful. Seems like a stand up guy. I hope he’s able to get the issues. Worked out soon and sells the hell out of the systems
Currently running manual dropper (hornady) with IP trickler using Auto Trickler electronics on an A&D to finish out the charge. And while it works just fine I figured I was only going to have to do charges that way for a pretty limited time.
at least the preorder was really just a waitlist and not a pre-pay.
Just sucks cause a lot of small businesses probably get stuck just like he is now. You create an awesome product, but you have to release some type of content about it to gauge interest before dumping big $$ into production. And then they get F’d by supply chain, material, material costs etc
IP is great on communication etc. if you've ever emailed him he returns calls and is super informative and helpful. Seems like a stand up guy. I hope he’s able to get the issues. Worked out soon and sells the hell out of the systems
Last edited:
Got my ATV4 yesterday. It will hold me till 2026 or whenever. Just a PITA to empty and I'll have to make some shims when I get to the lincoln logs
Get with MK Machining on shims, they designed a set for the ATV4 and I think an upgraded nozzle as well. May have to direct message them on that
I would love to find a V3 auto throw to use until the IP dropper is available, but that appears to be a lost cause at this point. Alot of people looking and no one selling.
The shims are good to go, they have a replacement powder hopper with shims. The nozzles / small tube tips are still being tested and not released yet, but getting very close. The V4 upgrades make a huge difference in how it performs.
Looks like my power meter has shipped. Should keep me busy until the whole system upgrade ships..
I did get in on the preorder but not in a rush. I see it kind of like the form 4 I have done in the past.
Hurry up and wait.
I did get in on the preorder but not in a rush. I see it kind of like the form 4 I have done in the past.
Hurry up and wait.
The future is now, eForm 4 submissions are coming back in 24 hours.
I’m pretty sure I have a V3 thrower somewhere. I never used it. I only used the trickler.
Gotta be trolling, who has a v3 and then just only uses the trickler portion?!?!
I hope for you it’s legit and he finds it and delivers!!
