Thanks man! I love it! I just need to get better so I can do this thing justice
6BRA is a great cartridge, if you don't shoot little ragged holes with it, you know the problem is with you.
I love my 6BRA.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks man! I love it! I just need to get better so I can do this thing justice
Bunch of jabronies, whadd'a ya expect?!I cant take you boys anywhere. Smh.
likewise hence the gold barrel in the mod400 steel. It'll last me a long time lol6BRA is a great cartridge, if you don't shoot little ragged holes with it, you know the problem is with you.
I love my 6BRA.
BroooooooooooooooSide note, my AI left yesterday headed back down to FL for Rick to do his handy work on the buttstock swap, grip panels, and cerakote job.
What buttstock?Side note, my AI left yesterday headed back down to FL for Rick to do his handy work on the buttstock swap, grip panels, and cerakote job.
He's going back to a thumbhole AT stock lolWhat buttstock?
He's going back to a thumbhole AT stock lol
Funny, after hearing this from you I tried all of my mags. My AT-X seemed to feed my 6GT fine with AW mags. It’s the AX mags that have me an issue. Both are brand new. With all the hoopla in the other thread Scott from AI had messaged me regarding the feeding issues and said that they had recently redesigned those two mags to feed better and that they could replace them for me. So for now it appears to defiantly be an issue with the AX mags. Still would feel more comfortable running a spacer with 6GT though too.HRD spacers. But FWIW. I had so many issues running BRA in my AX mags in the AX chassis with the spacers. Regular issues too. Couldn't pin it down and tried everything. Switched the spacers to the AW mags with the new chassis, flawless.
Also had feeding issues with my 22GT in the AX mags and AX chassis, no spacers, could not get that issue rectified. Feeds flawlessly in the AO and AW mags. Who knows.
I wanted to run a spacer with my 22GT but it's just a c hair too long with the 95's. Sounds like they have at least addressed the issue and are working on fixing it so that's good. Keep us posted on the new mags and how they work out for yaFunny, after hearing this from you I tried all of my mags. My AT-X seemed to feed my 6GT fine with AW mags. It’s the AX mags that have me an issue. Both are brand new. With all the hoopla in the other thread Scott from AI had messaged me regarding the feeding issues and said that they had recently redesigned those two mags to feed better and that they could replace them for me. So for now it appears to defiantly be an issue with the AX mags. Still would feel more comfortable running a spacer with 6GT though too.
Bite your tongue, sir... Nanna was a saint!!!I feel like the buffer tube looks like something you'd find in your grandmother's sock drawer
I feel like the buffer tube looks like something you'd find in your grandmother's sock drawer
No, please noNanna had needs....
Not sure if joking but I 100% couldn't get dasher to feed reliable, HRD kits and everything on the AO chassis.I haven’t followed up on this thread in a while, anyone having any feeding issues?
Just wondering
Yeah, for the most part it was a joke, there’s another thread going about another rifle which I shall not name which is having some issues.Not sure if joking but I 100% couldn't get dasher to feed reliable, HRD kits and everything on the AO chassis.
eta: endlessly fucked with feed lips got new everything, the best I got it was a hiccup every other mag or so.
Yeah, for the most part it was a joke, there’s another thread going about another rifle which I shall not name which is having some issues.
That sucks though, honestly guys like David and others would be better for advice on getting Dasher to run. It’s a feed lip/spacer/magazine spring alchemy. Some rifles are worse than others and I’m not sure why. I tried BRA in my AX with the HRD kit and it was a shit show, so I never tried it again.
Did Dasher work in your AT/AX prior to getting the AO chassis?
I have never tried dasher before, so can't comment about it's performance in AI platform, but I'm not exactly surprised it didn't feed worth a fuck.For me, honestly, it was a whole mag issue. By that, I mean I had 2 dasher mags (AW with both PVA and HRD kits) that would feed 90-95%. Good enough to shoot a match a match with b/c all it would do is on the 8th round, the round would pop out of the feeds lips early and the bullet would jam into the breach face, so if I felt it, I would just pull the bolt back a little then back forward with no problem. Then my shooting partner sold his Ultimatum Deadline dasher. He ran AW mags with HRD kits with 0 issue so before he sent the rifle off, I tried his mags in my AI and they both ran flawless. He didn't do any voodoo or anything to them. Literally took the followers out, put the HRD kits in and that was it. I sent my AW mags with with his rifle and I kept his. I did test my mags in his rifle before sending them off and they worked in the Deadline.
With all that said, you couldn't buy these AW mags off of me. Lol. That's why I think it's just something to each individual AW mag working with dasher or not. But what do I know?
I can agree with this. A buddy tried my AW mags with zero stuff done to them in his lone peak with 6gt and ran flawlessly. He bought a couple AW mags new and couldn’t get them to function at all.For me, honestly, it was a whole mag issue. By that, I mean I had 2 dasher mags (AW with both PVA and HRD kits) that would feed 90-95%. Good enough to shoot a match a match with b/c all it would do is on the 8th round, the round would pop out of the feeds lips early and the bullet would jam into the breach face, so if I felt it, I would just pull the bolt back a little then back forward with no problem. Then my shooting partner sold his Ultimatum Deadline dasher. He ran AW mags with HRD kits with 0 issue so before he sent the rifle off, I tried his mags in my AI and they both ran flawless. He didn't do any voodoo or anything to them. Literally took the followers out, put the HRD kits in and that was it. I sent my AW mags with with his rifle and I kept his. I did test my mags in his rifle before sending them off and they worked in the Deadline.
With all that said, you couldn't buy these AW mags off of me. Lol. That's why I think it's just something to each individual AW mag working with dasher or not. But what do I know?
Does Rick have the Vision buttstock?The rifle should be getting down to FL today. Not sure if u knew it but Rick ended up sending it back to me without the grip panels and buttstock so that I could shoot a couple matches I had coming up. Once Rick gets it, I think he's getting cracking on it pretty quickly now that he has all parts in hand.
Does Rick have the Vision buttstock?
Unless he has a coyote TT for it, it'll always be second best jk jk I'm excited to see it done up!@Krob95 yours is freaking sick. Don’t get upset. Turn that frown upside down Your build really makes me want to spend some more money.
I was referring to @BLKWLFK9 self proclaimed status from his podcast. I’m anxious to see what kind of cerakote job he is getting. I already know all the other changes.
I opted for the Ninja version of the TT.Unless he has a coyote TT for it, it'll always be second best jk jk I'm excited to see it done up!
Only cuz you wanted to keep the resale value high cuz in the last 6 months you've run thru scopes faster than @clcustom1911 runs thru chicks in red shoes & now thicc girls, apparently.I opted for the Ninja version of the TT.
Only cuz you wanted to keep the resale value high cuz in the last 6 months you've run thru scopes faster than @clcustom1911 runs thru chicks in red shoes & now thicc girls, apparently.
WhtevrOnly cuz you wanted to keep the resale value high cuz in the last 6 months you've run thru scopes faster than @clcustom1911 runs thru chicks in red shoes & now thicc girls, apparently.
LOL! I'm pretty sure I know exactly where this is. Is the ramen place still there, around the corner?
Thanks, yeah it's Framnesen's rifle, check him out if you're on social media. He's one of Christian's friends in Norway and tests all the Vision stuff out for him.@samb300 , love the two tone, thing looks badass. Makes me want to get another AT to do this to. I miss that swept bolt with 60 degree throw...in your chassis it's about perfect.
I’m guessing a RRS tripod is like $3,000 USD in Norway hahaThat tripod to a non chicom tripod
I’m guessing a RRS tripod is like $3,000 USD in Norway haha
Finally more clear buttstock pics. Does it save weight over the heavy ass ax
Buy once, cry many times after paying insane taxes and import fees?You know that saying!
Buy once, cry many times after paying insane taxes and import fees?