KRG Bravo Chassis
- Thread starter southerngolfer
- Start date
Jefe - lookin good!
Can you run us through the components so we know what we're looking at?
I filled the cavities in the back and grip with copper chips and this stuff. The copper is denser than steel and the resin removes that cheap, hollow feel. I'm gonna do it on my next stock as well.
Thanks.
Vudoo Gen 2 22" MTU Ace barrel.
KRG Bravo rear w/ aluminum forend w/ Area 419 ARCA rail.
Custom mag well. (I bought the entire chassis as is, used, and couldn't tell you where the mag well came from.)
Trigger Tech Diamond 2 Stage. 13-15 oz. total.
NF NX8 Mil-XT, NF rings
Atlas bipod. (Moved to MDT since photo.)
RRS tripod, RRS Anvil.
Last edited:
I designed some small 3d printed molds that you guys are welcome to checkout if you like. They wont be as heavy as getting the real steel weights from KRG, but if you have a 3d printer you can add a little weight, or experiment with what you like for a lot less money.
Three molds for the buttstock, two under the recoil pad, and one under the flat / j-hook cover.
www.thingiverse.com
Also, I want to give credit to Hennig for this pistol grip weight mold. He sent me his design to work on. Honestly it fit pretty good in my KRG, so I didnt do anything to it. He allowed me to post it up for the world to use.
www.thingiverse.com
Happy shooting!
Three molds for the buttstock, two under the recoil pad, and one under the flat / j-hook cover.
KRG Bravo Buttstock weights by akh223
Small molds for adding weight to a KRG Bravo stock in the buttstock area. There are different items. One goes in the under either the flat cover, or the Hook style cover that is on the bottom of the stock and accessed by a single screw. Print these part with very thin walls (I used 2) and 0 top...
www.thingiverse.com
Also, I want to give credit to Hennig for this pistol grip weight mold. He sent me his design to work on. Honestly it fit pretty good in my KRG, so I didnt do anything to it. He allowed me to post it up for the world to use.
KRG Bravo Pistol Grip weight by akh223
Small mold to use for making a weight for a KRG Bravo stock. Goes in the pistol grip void. Print and fill with whatever weighted material you like, and you have a little weight plug to go in the hollow pistol grip. The beauty is that is can be removed if you dont like it, and you can customize...
www.thingiverse.com
Happy shooting!
I designed some small 3d printed molds that you guys are welcome to checkout if you like. They wont be as heavy as getting the real steel weights from KRG, but if you have a 3d printer you can add a little weight, or experiment with what you like for a lot less money.
Three molds for the buttstock, two under the recoil pad, and one under the flat / j-hook cover.
KRG Bravo Buttstock weights by akh223
Small molds for adding weight to a KRG Bravo stock in the buttstock area. There are different items. One goes in the under either the flat cover, or the Hook style cover that is on the bottom of the stock and accessed by a single screw. Print these part with very thin walls (I used 2) and 0 top...
Also, I want to give credit to Hennig for this pistol grip weight mold. He sent me his design to work on. Honestly it fit pretty good in my KRG, so I didnt do anything to it. He allowed me to post it up for the world to use.
KRG Bravo Pistol Grip weight by akh223
Small mold to use for making a weight for a KRG Bravo stock. Goes in the pistol grip void. Print and fill with whatever weighted material you like, and you have a little weight plug to go in the hollow pistol grip. The beauty is that is can be removed if you dont like it, and you can customize...
Happy shooting!
Wish this was around years ago. Mine is filled with devcon and lead weights and it isn’t coming out.
Nice stuff!
One if these in the qd socket works well
www.midwayusa.com
GrovTec Multi-Adapter Quick Detach Sling Swivel Stud Steel Black
The GrovTec Multi-Adaptor Quick Detach Sling Swivel Stud adds function to push button swivel bases. Use the supplied allen wrench to depress the plunger...
www.midwayusa.com
No, unless it's a CTR mag and you have a CTR mag specific chassis. Otherwise it's AICS only.
Pretty sure @Short-bus is the painting them for Altus. They are usually out of stock but this one just happened to be in so I couldn’t resist.
Yep. I can confirm that. It crossed my mind to setup a dealer account with KRG and offer pre painted Bravos, but I have so much work to do, it wouldn't be fair to those that are waiting patiently for me to get to their projects. It also wouldn't be fair to Altus, and I really like those guys, so i'll stick to what I do, and know best, which is painting.
Branden
Another piece of the puzzle showed up waiting on a couple other parts and can assemble the barreled action. Excited to finally try out the bravo after it sat unused for ever
24" Tikka T3 in .223, skinny barrel, threaded, with knurled, larger than barrel diameter thread protector. Sterk bolt knob and shroud, NF 5-25 ATACR 2nd focal plane with Accuracy First level, and NF flip open covers. NF rings on a full-length pic rail from...? KRG Bravo chassis with minimal LOP, BCM sling mount on forend, TRG type bipod stud added to the front of the chassis from a British company whose name escapes me. 12.1# with no magazine or sling. I can take a pic if you need more clarity on setup/weight.
This particular .223 was easily half-minute capable in the plastic Tikka stock. When I dropped it into the Bravo, which took a little bit of fiddling to get the magazine fit right, it now shoots .25 moa very regularly.
Hey bud I messaged you a couple questions, but more than happy to email if you prefer it. LMK the best way to contact you.
Love your work.
Branden does killer work! I have a couple of chassis' painted up by him.
This is my newest Bravo, to set my Mausingfield up for hunting. At some point I need Branden to work his magic on it:
Very nice. What caliber and barrel length you running? I have an 18.5 inch threaded benchmark that’s suppose to be delivered tomorrow in 6 creed. Was done by TS Customs for my Arc Archimedes. So for the time being I’m going to remove my 6.5 prc barreled action and drop the Arc 6 creed build in my bravo until I can order another stock/chassis. I was hoping to have my new suppressor by now but I’m still waiting. Certified eform 4 trust on 3/2
Very nice. What caliber and barrel length you running? I have an 18.5 inch threaded benchmark that’s suppose to be delivered tomorrow in 6 creed. Was done by TS Customs for my Arc Archimedes. So for the time being I’m going to remove my 6.5 prc barreled action and drop the Arc 6 creed build in my bravo until I can order another stock/chassis. I was hoping to have my new suppressor by now but I’m still waiting. Certified eform 4 trust on 3/2
It's an 18" Benchmark in a contour similar to 3B, in 6.5 Creedmoor by TS Customs.
Travis does amazing work, you'll love the new barrel!
Your suppressor hopefully won't be too much longer. I got that suppressor pictured last week, I certified 02/17. You shouldn't be too far behind.
Yea I’m excited about it. Travis was great to deal with and excellent turnaround time also.
I’ve been keeping an eye out everywhere for one as a backup for a NSW friendly stock
