KRG Bravo for CTR that can take TRG/CTR mags?

#207
I see there are 37 left as of now and there were 41 yesterday when I bought mine.

I wonder if 50 were made? I also wonder how many would need to be sold and in what timeframe to make it a "success" to KRG?
 
#210
I kind of want to jump on one of these, but also was hoping for Sako Green.
Additionally, I’d have to bust out the tools to convert to a lefty bolt. Not sure if the itch is worth the scratch.
 
#211
Massoud said:
Hi guys, these should be ready for order at the end of this week, to ship next week after the Black Friday orders are cleared out.

You can modify a W-3 to use the CTR mag, it's the same procedure, make the magwell rectangular instead of tapered and then swap in our TRG mag catch.

We will continue to make the AICS mag version, the CTR is a limited run for now depending on how well it does. Thank you,
Justin
Click to expand...

IDk if its too much of pain, but any chance to make the announcement when available to order here? Been following this one and only thread for 2 years lol. Also have been patient enough to not buy anything else and make compromises like some others haha.
 
#212
3.oh.Hate said:
IDk if its too much of pain, but any chance to make the announcement when available to order here? Been following this one and only thread for 2 years lol. Also have been patient enough to not buy anything else and make compromises like some others haha.
Click to expand...
Edit am Idiot, didnt realize they were available to order.
 
#218
Mine still shows processing but when it changes to shipped I expect to get an e-mail. I did the last time that I ordered a chassis.

This is how it was titled last time "Your Kinetic Research Group order from January 2, 2018 is complete" and it contained a tracking link.
 
#219
Hi guys, you should get a tracking number. Keep in mind that sometimes it can appear that your card was billed but we haven't done final charge capture. We're still getting out Black Friday orders, there was so many and things haven't slowed much but we are shipping huge numbers (for us) every day so we'll be caught up soon it appears.
Thank you,
Justin
 
#223
Guess I'm the first to post a pic with the CTR Bravo. My 22-250 varmint ready to sight in.

Thanks KRG!



 

Attachments

  • IMG_20191215_141542.jpg
    IMG_20191215_141542.jpg
    760.4 KB · Views: 61
Last edited:
  • Like
Reactions: Massoud and awcmon
#225
jlficken said:
I got mine today and installed it.

@Massoud What are the 2 small shiny washers for as I couldn't find any reason to use them?View attachment 7204301
Click to expand...

I think those are shims that are shipped standard with all their chassis, in case you need to shim the action screws a bit. Nice socks.
 
Last edited:
#232
I like it so far. I have a Bighorn TL2 with a 20" barrel in 223 in a Bravo that I like as well.

The only thing I noticed is a void below the cheek-piece after you replace it with the Tikka specific one. I may fill that with something.

I'm sure my Remington Bravo has it too but I never noticed it since I run the cheek-piece at the lowest position. The Tikka cheek-piece is open on the bottom though so it's always exposed.
 
#233
jlficken said:
I got mine today and installed it.

@Massoud What are the 2 small shiny washers for as I couldn't find any reason to use them?
Click to expand...

Those shims are in case you need to drop the mag catch height a bit. You just put them between the trigger guard and the chassis at the rear action screw and at the front mounting screw for the trigger guard and it will shift it down slightly. Most shouldn't need them, we were just giving some small adjustability there.

Thank you everyone for your business!
Justin
 
#234
Massoud said:
Those shims are in case you need to drop the mag catch height a bit. You just put them between the trigger guard and the chassis at the rear action screw and at the front mounting screw for the trigger guard and it will shift it down slightly. Most shouldn't need them, we were just giving some small adjustability there.

Thank you everyone for your business!
Justin
Click to expand...

Makes sense. Thanks for the clarification.

My mags are snug but got easier to seat after a couple of insertions.

I'm thrilled that you got them released and thanks again!!
 
  • Like
Reactions: Massoud
#235
Curious what the ETA is for the other colors. Like others I'm interested in the Sako Green. I want to jump on buying but since it's christmas time with the expenses that come along with it , I can wait a month or two.
 
#236
Justin,
How close are we to justifying a Sako Green CTR Bravo? I really want to wait till they're an option, but if the "limited" CTR Bravo's become just a brief thing and I miss out on the Black, then I may end up with a GGS instead.
 
#242
Bakwa said:
Justin,
How close are we to justifying a Sako Green CTR Bravo? I really want to wait till they're an option, but if the "limited" CTR Bravo's become just a brief thing and I miss out on the Black, then I may end up with a GGS instead.
Click to expand...

Green is coming, sometime 1st QTR.
Thanks guys,
Justin
 
  • Like
Reactions: rmr440, 3.oh.Hate, SniperEnvy and 2 others
#245
It looks like all of the Black Bravo (CTR Mags) Chassis have sold. KRG's website now showing sold out. Hopefully after the shot show scramble they'll have another run of black and green.
?
 
You must log in or register to reply here.

Similar threads

Chopping Broccoli
SOLD KRG Bravo - Tikka T3X for CTR Mags
Replies
2
Views
231
Chopping Broccoli
Chopping Broccoli
FrozenMinnesotan
Stock conundrum
Replies
11
Views
410
King_beardsly
King_beardsly
Toast
MDT AICS Short Action .308/7.62x51 10 Round Hybrid Window Magazines
Replies
6
Views
425
DRAKENBURG
DRAKENBURG
Rodney65
Tikka TAC A1 chassis vs. KRG Whiskey 3
Replies
4
Views
627
Rodney65
Rodney65
C
Whiskey 3 compatibility with CTR mags?
Replies
7
Views
490
ma smith
ma smith
Top Bottom
Back
Home
Forums
Merch
Alerts