Let's solve this savage dbm problem

#401
Re: Let's solve this savage dbm problem

Ahhh, yes. I was thinking that it was going to be 7 rounds, so that is good news Brother!! I am glad that you are happy with them...
wink.gif


DK
 
#402
Re: Let's solve this savage dbm problem

I have a 10fp,(308) center feed, 4.40 spacing, savage bottom metal. What mags do I need to to send in. I got a number for a mag body, 105663, I can't find that part anywhere.

Will the axis mags work with my rifle?
 
#403
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: thefiremeister</div><div class="ubbcode-body">I have a 10fp,(308) center feed, 4.40 spacing, savage bottom metal. What mags do I need to to send in. I got a number for a mag body, 105663, I can't find that part anywhere.

Will the axis mags work with my rifle? </div></div>

Axis are different than the standard Savage mag and do not interchange.

Not sure what you mean "send in" ? My mags are complete, ready to use.

product-2.jpg


www.darkeaglecustom.com
 
#404
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: deadeye</div><div class="ubbcode-body">

product-2.jpg


www.darkeaglecustom.com

</div></div>

Let me just say I have one of these mags and they are truly top notch! I would still like to try a ratamg out but The darkeagle one has been put to the test in the AZ dirt/sand and with that AR style string/aluminum follower it doesn't bind up and get stopped up like the 2 stock mags I have for my 10FP. Can't got wrong with one of these!
 
#405
Re: Let's solve this savage dbm problem

I was asked again about the differences in using the standard factory Savage magazine parts, versus using the Savage Axis/Edge magazine assembly. The Axis/Edge assemblies is what I actually prefer now, even though the standard design works well.

I had a few of them to build, so I thought I would post a pic of the differences before I mailed them off tomorrow...

Top left, 308 RatMag 10 round of standard design.
Top right, 22-250 RatMag 10 round of standard design.
Bottom left, 308 RatMag 10 round using the Axis/Edge assembly.
Bottom right, 308 RatMag "15 rounder" using the Axis/Edge assembly.

I really like the magazine assemblies that use the Axis/Edge magazine to convert from. Check them out!!

DK


IMAG0251.jpg
 
#407
Re: Let's solve this savage dbm problem

I can't attest to yours yet... Sometime when I get a few extra bucks I will be coming your way
smile.gif


I just have to praise Dan as after the 7+ month wait and BS from SSS it was a very welcome relief to have something so topnotch as his mags and I am sure yours are going to match my expectation when I get one. I want to compare the 2 of your mags side by side in the AZ desert sand and see how both work out.
 
#410
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: D.A.T.</div><div class="ubbcode-body">rat did mine and did a great job
</div></div>

Thanks Brother!! I do greatly appreciate the kind words...

DK
 
#412
Re: Let's solve this savage dbm problem

Just wanted to add that I got one of the 10 round round mags from Dark Eagle. It came looking like a professionally built product, and not something someone made in their garage( nothing wrong with that either though!)

The first day of using it, I had issues with it not clipping in fully and dropping after a shot. To get it clipped in fully I would have to put ALOT of rear/upward pressure. However, by the next time I used it the problem worked itself out. After talking to Dan it seems like its just very small variations in the receiver, so after using it for a day the mag contacts wore away just enough to start locking easily.

So overall its a great product that works good, looks good and feels solid. I would recommend it to anyone looking for an extended magazine solution. If you have any locking issues, I would take it in and out maybe 30-40 times and it will fix itself
 
#415
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: billyburl2</div><div class="ubbcode-body">I got 2 more Ratmags for my WSM. 7 rounds and absolutely no problems! Thanks again D! </div></div>

You are more than welcome Brother!! Thank you for your business... muchly appreciated!!

DK
 
#416
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: EricF517</div><div class="ubbcode-body">Any plans to make one of these for the 223? My wife wants a larger mag for her Savage 12.
</div></div>

I am not sure if you were asking me or not, but I will give you my answer. Yes, I am currently working on the 204/223 magazine conversion. Follower dive is the biggest issue at the moment, but I have a plan that I believe will cure this situation.

I will be updating this thread as things progress along.

DK
 
#417
Re: Let's solve this savage dbm problem

Im interested in what I've read. I have a 110fcp h&s stock in 300 win mag. Just bought last week. What are my options? Anyone make at least a five round mag for my 300 win mag?
 
#418
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rammerjammer</div><div class="ubbcode-body"> Im interested in what I've read. I have a 110fcp h&s stock in 300 win mag. Just bought last week. What are my options? Anyone make at least a five round mag for my 300 win mag? </div></div>

I have it drawn up for the long actions but just haven't had the time to make any prototypes. It's in the works but will be some time yet.

Dan
 
#419
Re: Let's solve this savage dbm problem

I have found a great source for the springs that I needed to complete the 204/223 conversions. I will be working on a prototype of this conversion, and should have it completed shortly.

Stay tuned!!

DK
 
#423
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: z71rat</div><div class="ubbcode-body">I have found a great source for the springs that I needed to complete the 204/223 conversions. I will be working on a prototype of this conversion, and should have it completed shortly.

Stay tuned!!

DK </div></div>

Think u could do one for a 300 win mag model 110 fcp? At least a 5 rounder or know of a source?
 
#424
Re: Let's solve this savage dbm problem

I don't have a source for the long action magazine bodies to convert. If someone had some cheap surplus magazines that I could do the R&D from, then I might be able to come up with one.

DK
 
#425
Re: Let's solve this savage dbm problem

OK, guess what guys... I have in my possession, a 15 round high capacity Savage and Savage Axis/Edge magazine!! Fully functional, and I think they look pretty dang good to boot!!

DK


IMAG0319.jpg


IMAG0323.jpg
 
#428
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dwt</div><div class="ubbcode-body">Looks good Rat,can't wait for the .223 10 rounder </div></div>

I will take one as well when available.
 
#429
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: z71rat</div><div class="ubbcode-body">OK, guess what guys... I have in my possession, a 15 round high capacity Savage and Savage Axis/Edge magazine!! Fully functional, and I think they look pretty dang good to boot!!

DK
</div></div>

Hey DK--you're breaking new ground again! Awesome.
 
#430
Re: Let's solve this savage dbm problem

Thanks guys!! I am trying to come up with a long action magazine as well. I will be working on getting the materials come payday. I wish I was a wealthy man, and could just buy what I wanted, when I wanted it... but tis not the case!! LOL

More details to follow on the 15 round 204/223 magazine. I am not completely happy with how it functions, as it could be smoother. Back to the R&D stuff to make the transition smoother, and to also work on the 10 round version!!

Stay tuned!!

DK
 
#431
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: EricCartmann</div><div class="ubbcode-body">Good job Rat. If I did not have 2 mags from SSS already I would be picking these up from you. </div></div>

No problem Brother... I'm just tryin to help out where I can!!

DK
 
#432
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: akxx</div><div class="ubbcode-body">Hey DK--you're breaking new ground again! Awesome.
</div></div>

Thanks!! I am doing my best!! LOL

DK
 
#434
Re: Let's solve this savage dbm problem

I currently have working designs for the following:

243
260
7mm-08
762x39
308
22-250
6.5 Creedmoor
6.5 Grendel

From all working aspects, I believe that the 300 Blackout is a very doable situation. I just need to double check the host magazine dimensions.

In the works as of today:

204
223
270
6.5x284
30-06

I am sure there will be others to come. Stay tuned!!

DK
 
#435
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: z71rat</div><div class="ubbcode-body">I currently have working designs for the following:

243
260
7mm-08
762x39
308
22-250
6.5 Creedmoor
6.5 Grendel

From all working aspects, I believe that the 300 Blackout is a very doable situation. I just need to double check the host magazine dimensions.

In the works as of today:

204
223
270
6.5x284
30-06

I am sure there will be others to come. Stay tuned!!

DK </div></div>

Just a heads up, Savage has walked away from the 300.

btw, love my RatMag!
 
#436
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 346ci</div><div class="ubbcode-body">Just a heads up, Savage has walked away from the 300.

btw, love my RatMag! </div></div>

Hmmm, I didn't know that. I have had several inquiries about it already. Bummer.

I am very glad to hear that you love your RatMag!! Thank you!!

DK
 
#437
Re: Let's solve this savage dbm problem

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 199thINF</div><div class="ubbcode-body">Just got my 3 ST-10s today! Great craftsmanship! z71rat is a true ar-teest
grin.gif
Can't wait to try them out! Thanks rat!!! </div></div>

Some more kind words!! Thanks!!

DK
 
#438
Re: Let's solve this savage dbm problem

I bought 3 mags from z71rat! They are top notch and worked flawlessly in the Savage 10PC. He does TOP OF THE LINE WORK, IMO.
laugh.gif
 
#439
Re: Let's solve this savage dbm problem

I am really glad to hear you guys are happy with the magazines. I really like making them, and I get to test them all out before they get shipped!!

That is about all the shooting time I am getting these days!! LOL

DK
 
#444
Re: Let's solve this savage dbm problem

OKAY OKAY OKAY... Here is the "New Scoop" on the long action magazine conversions. The BAR magazine worked out very very well. Quite a bit of work was involved to make this one happen, but I am pleased so far with the results.

This magazine conversion works with the 25-06, 270, and 30-06 long action rounds. It might actually work with others, but that is all the long action brass that I have access to try out.

Here are a few pictures to see what has happened with the design... This particular magazine conversion is for the Savage Axis/Edge rifles, but uses the same components as the standard Savage rifles as well. The only difference is, I have to also cut off the front magazine release tab to be used as standard.

DK


IMAG0637.jpg


IMAG0638.jpg
 
#445
Re: Let's solve this savage dbm problem

DK...call me a slow learner but I've read this post and your answer to Firemeister several times and am still confused. My new 10 FLCP-K (in .308) should be at my LGS on Friday, a bit later than projected due to the fires around our state interrupting shipping, according to my dealer.

Will your 10 round mags work in my new rifle or is it not compatible with what you're building, please? If your mag will work with my model, will you need the detachable box mag that comes with my rifle to complete the project?

Sorry to take your time with this question but would appreciate a bit more clarification when you have a moment to reply.

Thanks again, and keep up the good work. Sounds like a nice little enterprise you've got going.

Bailagent100

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: z71rat</div><div class="ubbcode-body">I was asked again about the differences in using the standard factory Savage magazine parts, versus using the Savage Axis/Edge magazine assembly. The Axis/Edge assemblies is what I actually prefer now, even though the standard design works well.

I had a few of them to build, so I thought I would post a pic of the differences before I mailed them off tomorrow...

Top left, 308 RatMag 10 round of standard design.
Top right, 22-250 RatMag 10 round of standard design.
Bottom left, 308 RatMag 10 round using the Axis/Edge assembly.
Bottom right, 308 RatMag "15 rounder" using the Axis/Edge assembly.

I really like the magazine assemblies that use the Axis/Edge magazine to convert from. Check them out!!

DK


IMAG0251.jpg
</div></div>
 
#446
Re: Let's solve this savage dbm problem

DAMN, I started this thread back in 2010 out of frustration. It's awesome to see that so much has come from it. I'll be honest, I've since switch from my savage but I'm glad that that people jumped on it!
 
#448
Re: Let's solve this savage dbm problem

Will your 10 round mags work in my new rifle or is it not compatible with what you're building, please?

<span style="font-weight: bold">ANSWER: YES, it will work!!</span>

If your mag will work with my model, will you need the detachable box mag that comes with my rifle to complete the project?

<span style="font-weight: bold">ANSWER: YES, as I don't stock these parts!!</span>

Thanks again, and keep up the good work.

<span style="font-weight: bold">ANSWER: Thanks a lot!!</span>

Sounds like a nice little enterprise you've got going.

<span style="font-weight: bold">ANSWER: Oh man... don't I wish!! LOL</span>
 
#449
Re: Let's solve this savage dbm problem

That's EXCELLENT, DK! I'll be forwarding the mag to you early next week, after I take delivery tomorrow or Saturday...as long as the trucks can get through the smoke.
wink.gif


Off to re-read the thread to get ordering/shipping/payment instructions...

Thanks, again, DK. Best news I've had today.

ETA: I appreciate your quick reply, DK. Part of my confusion seems to be I was up reading & posting waaaay past my bedtime when I originally submitted my questions. My bad. And, I'll just pm you for the info I need to get one of these mags ordered. Thank you.

Bailagent100
 
#450
Re: Let's solve this savage dbm problem

Thanks to Rat I just got my "Old Style" Side button savage DBM working.

Borrowed the design and had an armorer who owed me a favor make a set out of a blued steel savage mag and a blued steel g3 mag.

15 rounds to boot!

Savage.jpg


BMT
 
You must log in or register to reply here.

Similar threads

KimberGuy
Lengthening the mag catch on long action AICS DBM?
Replies
6
Views
198
KimberGuy
KimberGuy
secondofangle2
Help modernizing my rifle to 6.5 PRC w/DBM please
Replies
6
Views
303
secondofangle2
secondofangle2
S
Zermatt Greyboe phoenix & M5 DBM feeding problems in 6.5 PRC
Replies
8
Views
305
shootnozeros
S
Douglas-001
Advice on .223 Tikka T3X and a KRG Bravo
Replies
29
Views
776
carbonbased
carbonbased
J
Sako A7 Re-barrel
Replies
0
Views
173
JWAIV
J
Top Bottom
Back
Home
Forums
Merch
Alerts