-
Having trouble using the site?
Contact support
Solid group man, but also really surprised/impressed that the SD & ES were that good.
Wonderfully gassed, and sub-moa with Federal LE T308T. I just wish there was a way to get a 6.5cm piston barrel to go with so I didn’t have to buy a whole new DI BCG just to be able to shoot a different caliber.
This isn’t the first time honestly. The first 5 shots i had with the same ammo from AAC was similar. Granted i think it’s hot. I had a blown primer this outing and it’s just a ton of speed for a 17ish gasser. I’ve shot about 85rds of the first 100 i bought. Bringing another 100 home to hunt with it.
This was the first grouping with it.
Thanks boss. I had her out this morning and finally got a good chance to work with this new trigger. I still have to break her in a little bit but at least for now it feels like the break on the 2nd stage could be a little cleaner - but I'm splitting hairs. It feels excellent and I was able to put some good (okay) groups together.
I think I'll call her black Betty for now.
1"X1" @100 yards - still suffering flyers. Def my breathing.
2x2 @100 - warmup on the big square
Getting better every week.
Oh yeah she’ll shoot. You tried using a real good grease on all the contact/friction points yet on the G trigger?
Also, I’ve had several SSAEXs and some are just noticeably better than others. My best one I made sure to put in this LMT 308 and not my 556s LOL.
Damn that’s impressive man. I’ve normally only seen those kinds of numbers with FGMM/Federal LE and Berger ammo. I’m glad to know there’s another really good option out there, as I would’ve never even guessed that ammo would be that good.
With G triggers I generally put a small amount when I install them, run about 500 rounds through them, take em out and clean em up real good then grease the hell out of them.
I've built a ton of guns with the G super dynamic combat 2 stage, and that's how I got the best performance out of them. Started doing it for all my G triggers.
It might be all in my head but swear they break in better like that.
I know right? With hornady making the projectiles and it costing roughly $1.10/rd I’m sold. There is no reason for me to spend nearly double on fgmm. And i could load but the idea of loading for a gasser makes me nauseous. So right now it’ll be restricted to the bolt guns where i can reasonably keep up with brass. And don’t have to buy an ugly ass brass catcher.
There is another brand called bullets1st that makes 175gr OTM around the same price as aac. Supposed to be decent as well. I haven’t tried them though
I'm interested in what triggers people are running in their large frame LMT Mars-H.
I wanted to try a trigger tech diamond but G had a crazy black Friday deal on this SSAE-X so I grabbed it knowing I'd use it in something.
I run American gold flat faced triggers in my small frame AR's right now. They are great at what they do but I haven't tried them in an AR10 yet - I've heard ATC makes a specific AR10 version.
I wanted to try a trigger tech diamond but G had a crazy black Friday deal on this SSAE-X so I grabbed it knowing I'd use it in something.
I run American gold flat faced triggers in my small frame AR's right now. They are great at what they do but I haven't tried them in an AR10 yet - I've heard ATC makes a specific AR10 version.
I’m running a Geissele High Speed NM trigger in my MARS-H.
I have a SSAE-X in a MARS-L. It’s close enough to the NM that going forward I will be using SSAE-X in any other guns.
I have a SSA-E and it is a good trigger for this application. There is a risk for a short-travel single stage trigger like the SD3G/S3G (depending on technique and recoil impulse) to result in accidental doubles or bump firing.
Just did that very thing already had a .243 bbl got the DI bolt carrier on Monday…
I'm picking up my 6.5 cm barrel today, but I have a ton of 308 to shoot through.
Plus I have to paint the barrel and find a muzzle device.
What 6.5 cm rounds should I start ordering to get good accuracy out of the factory 20" 6.5 cm as barrel?
Plus I have to paint the barrel and find a muzzle device.
What 6.5 cm rounds should I start ordering to get good accuracy out of the factory 20" 6.5 cm as barrel?
Anyone know if the htx double pic gas block clears the pic rail with a rifle length has system?
Griffin sob buffer was perfect. Opened up the gas block 4 o’clock ejection unsuppressed and lock back unsuppressed.
I run a jp captured buffer in pretty much all of my rifles including my mars-h. What makes the Griffen different?
I mean its like in between an H2 & H3 so it just was the right combo with my seekins select adjustable gas block for 4"Oclock ejection with or without the can at either setting.
The SCS has a tuneable one where you can start with an h2/3 buffer weight and swap the springs around for the exact amount of spring you want.
It's also quiet as hell vs the cheese grater sound from the spring. I bet you would never notice it until it's not there.
FWIW i love the SCS and the way it feels. Just never had any intention of trying to spend that much for a buffer system.
Enough that i don’t want to spend another $150-200 on a $50 problem lol.How much is an LMT BCG?
What’s the BC on that bullet? I might need to try some of i can find it cheap enough
I have yet to shoot it at distance and true it up, but in my kestrel library it shows a G7 of .257
I honestly kinda feel like LMT doesn’t market themselves enough. I mean i get it. Big govt contracts pay well, they don’t need to at this point. But there is certainly a subset of enthusiast that would flock to that type of performance with that level of reliability. While i have a sample size of one and it’s my first LFG, i don’t see the need to really chase Geissele, Seekins, KAC, or Larue given my experience thus far especially for the money. I say all this as someone who is on the list for an MGL 110 but it’ll be in the vein of making a mock 110 on the MWS quad cause URX 7.62s are unobtainable.
Oh without a doubt it’s unique. My point was i would use it if i were LMT personally speaking. I think pieced together my LM8 for right at 2700 granted it was all used other than the Lower, LPK, and stock. Even then i think you can snag a defender for $2500 less with sales. Idk how the chrome barrels shoot comparatively speaking since i went with 18” SS for mine.
I totally agree. I also watched the video. He found one of the space magic MRGG submission barrels. They had a 15000 round count sub MOA requirement with a 0.5MOA objective for a 14.5" 6.5CM. Tell me where to find that barrel!
The Lmt .308 shoots great too!
The MRGG-A 14.5 barrel has some new features going on for LMT that I hope they expand to other barrels someday.
Attachments
Finally finished and setup the way I want now.
17lbs with empty mag/MDT/36M
18” 308 with BRT tube
Before
After
17lbs with empty mag/MDT/36M
18” 308 with BRT tube
Before
After
You should probably know your scope cap is down sir.
(Everyone remember the picture of Biden looking through binos with caps on right?)
I love the Tano look. I have a small frame. LMT Mars l in Tano. I have never been able to find a Tano upper receiver for it though.
