Official (DTA) SRS, HTI, Covert, Hunter Thread

[archaos]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

That looks great. Nice work

 

[VKC]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

Thanks ColdBoreMiracle for your help. I followed your advise and got the cosine device onto my rail without problems. That was the one factor that was keeping me for making my DTA my main "go to" bolt action rifle. Thank you.

 

[coldboremiracle]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: vkc</div><div class="ubbcode-body">Thanks ColdBoreMiracle for your help. I followed your advise and got the cosine device onto my rail without problems. That was the one factor that was keeping me for making my DTA my main "go to" bolt action rifle. Thank you. </div></div>
No problem, enjoy it.

 

[dixie3bass]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

Covert came today from eurooptic, they were out of monopods said they will send it when it comes in . Waiting on end cap for shark. Will post pics when all together.

 

[Thor2j]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

Looking for sling recommendations for SRS??

Using it for carrying, not shooting.

 

[RedGoat]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

I think the TAB flush cup sling does well for shooting and carrying. That or in my Eberlestock pack...

 

[bas402]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: armsaddiction</div><div class="ubbcode-body">Hey Sully,
I wish you were a little more patient.like myself and others who haven't thrown me under the bus! great stuff is always worth the wait! I waited almost 3 years to get a factory M4 Benelli folding stock. And got the call they were shipping it out on the day of my Birthday. Was the best gift I ever got! And Was worth every bit of the 2 1/2 years I waited. Only paid retail $250 To everyone who has requested one I still have every intention on getting everyone there pad. Also i have a new model to add to the line-up. I was getting requests for sniper teams if I could make a pad that could hook to theDre vest or Ruck or and a mag pouch to etc.

Brian,
Wow communication! I'll take it even though I sense a hint of sarcasm. Please check you PM's. By the way looks good!
Sully

Things have been rough on me this year with my income loss and wasn't able to even think of sewing in my crisis. But I am in the works having 60 pads made before the years end.
Thank you for everyone's support and patience. </div></div>

 

[finbox]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

Thanks for all the replies, and more important the many honest PM's.

I will run my trusty 5r till they get the bugs worked out.

 

[cox308]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: finbox</div><div class="ubbcode-body">Thanks for all the replies, and more important the many honest PM's.

I will run my trusty 5r till they get the bugs worked out. </div></div>

Could you elaborate on these bugs please.

 

[PSYOPS]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cox380</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: finbox</div><div class="ubbcode-body">Thanks for all the replies, and more important the many honest PM's.

I will run my trusty 5r till they get the bugs worked out. </div></div>

Could you elaborate on these bugs please.</div></div>

Yea, what bugs...just curious, not trying to start a debate.

Thanks.

 

[dixie3bass]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

I anyone else have atlas bipod on covert? Mine is a little loose, I have the nut tightened down and it's super hard to throw the lever now to get it off. It fit great on my ai rail.

 

[broke_again]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PSYOPS</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cox380</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: finbox</div><div class="ubbcode-body">Thanks for all the replies, and more important the many honest PM's.

I will run my trusty 5r till they get the bugs worked out. </div></div>

Could you elaborate on these bugs please.</div></div>

Yea, what bugs...just curious, not trying to start a debate.

Thanks. </div></div>

Yeah please enlighten us.

 

[biffj]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nukes</div><div class="ubbcode-body">What projectiles are being used in the DTA .510 Whisper conversions?

Anybody do relevant gelatin studies? </div></div>


I have no idea if anyone has done testing with the subsonic 510 in ballistic gel.....

Guys who are shooting the 12.7 X 48 (as any setup not made or sold by jd jones is known) are using pretty much any projectiles that will fit the US .50 BMG or any other .510 diameter projos. The round will spit out a 650Gr API at up to 1300fps though they are normally fired at under 1100fps for subsonic use. As noted there are guys shooting AMAX and other specialty .510 bullets. I know Lehigh in Pennsylvania makes some neat stuff for subsonic use that include a smaller cal projo inside to help with expansion. I have loaded 300 and 450gr Barnes flat soft point bullets and have been working some loads up for them to hunt with. So far I've got the 450s's up to about 2000fps with room still left in the case.
The round is made from .338 Lapua Mag brass shortened and necked to take the .510 projo. This means any SRS or Covert can be setup by swapping the barrel and using the .338 LM bolt. I've not worked out mags yet as the shoulder retention feature on the DT mags makes them unuseable for the 510 with the longer BMG bullets. Using the 450 and 300 gr Barnes bullets the mag will work and the round will feed. Its on the project list to come up with something to feed the longer bullets. This round does single feed much better than the others due to its size. Brass is not simple to make but it is doable. It lasts a long time so the cost evens out in the long run. I've got cases I've fired over 20 times and have never had crack. It is a neat round to shoot with a variety of reactive projos like the API, APIT, Tracers, Incendiary, and even the spotter/tracer if the throat is reamed for it. 50 cal tracers burn a long time and its neat to see trajectories in real time rather than just looking at graphs.

Hope that answers some of the questions.
here are a few pics

Frank

450gr cast compared to .50 BMG API

Rifle with 12.7 X 48 barrel installed

Another DTSRS with 12.7 barrel and suppressor

 

[RedGoat]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

Would much rather a dedicated .510 subsonic barrel than using the .308 for it. If I had a .510 suppressor I would have one of these barrels on order.

 

[MicLR]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

I have a DTA SRS I've not shot yet... Curious to hear how the DTA ammo in.338LM (300gr.) or the .308(175gr.) performs from the factory vs. hand loads in the SRS. THX.

 

[Dogtown]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

I tested the 300gr .338LM for an article against a number of factory loads and my own handloads. It's definitely good to go, performing similar to Lapua factory ammo. I personally have preferred the 250 Scenar in my 26" barrel and generally run them hotter than most factory loads, but your mileage may vary.

 

[mouse07410]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RedGoat</div><div class="ubbcode-body">Would much rather a dedicated .510 subsonic barrel than using the .308 for it. If I had a .510 suppressor I would have one of these barrels on order. </div></div>
A naive question: what does .510 subsonic buy you that .338 subsonic can't offer? Not picking a fight, just trying to learn.

 

[MicLR]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

Thank you Dogtown! Assuming the mag length allows, do you seat at SAMI length or out closer to the lands?

 

[RedGoat]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mouse07410</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RedGoat</div><div class="ubbcode-body">Would much rather a dedicated .510 subsonic barrel than using the .308 for it. If I had a .510 suppressor I would have one of these barrels on order. </div></div>
A naive question: what does .510 subsonic buy you that .338 subsonic can't offer? Not picking a fight, just trying to learn.</div></div>

Knockdown

Lehigh SS Bullets @ 1050fps
.308 - 200gn has 389ft-lbs @ 300y
.338 - 230gn has 461ft-lbs @ 300y
.510 - 680gn has 1262ft-lbs @ 300y

That's a 273% increase over the .338.

 

[Dogtown]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MicLR</div><div class="ubbcode-body">Thank you Dogtown! Assuming the mag length allows, do you seat at SAMI length or out closer to the lands? </div></div>

Actually, with the 250 Scenar I'm using the standard 3.681 COAL

 

[ney1]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

Red goat,
I believe there is 300 grain subsonic 338lm which would bridge the gal a bit closer.

Trajectory is an important factor for subsonic ammo too because the amount of adjustment required is significantlylore than standard ammo once past 100 yards.

 

[biffj]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mouse07410</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RedGoat</div><div class="ubbcode-body">Would much rather a dedicated .510 subsonic barrel than using the .308 for it. If I had a .510 suppressor I would have one of these barrels on order. </div></div>
A naive question: what does .510 subsonic buy you that .338 subsonic can't offer? Not picking a fight, just trying to learn. </div></div>
The 510 does offer more energy than even the 300gr .338 bullet at all ranges if they are both subsonic. With good bullets the trajectory will be very similar for both. The big thing with subsonics is that bullet diameter makes a huge difference in energy delivered. Friends hunting with 300 whispers have noted that the deer go down quicker with 44mag subs and they seem to find the bullets most of the time. With the 220gr .30 cal slugs they never find the bullet as they tend to overpenetrate. That means energy wasted. The difference may not be a big deal however as dead is dead and the snack stix I'm eating tell the tale....(buddy used a 300whisper on a deer and gave me some snack stix)
Just like with all the other cals available to us we find there is a lot of overlap and we choose what we want for our own reasons. Its not always logical but some guys will swear that brand x is more effective than brand y. You must choose for yourself....
I like the 510 because I can get tracers and API that do things we can see like trace or flash on target. On the other hand I've also got a .338BR which uses a much smaller case than the Lapua mag but the same bullets. Its intent is subsonic 300gr quiet shooting. So there you have it....I like both of them along with the 6.5 X 47 which is waiting for brass to come in and of course the .338 Lapua Mag.
These cal choices are one of the main reasons I bought the SRS and it has worked out fantastic. I only needed one expensive (for me) scope, one rifle, one cheekweld, one trigger and I can choose any of 4 useful cals to shoot. All suppressed of course.....
Like Nick noted the trajectory on these subs is pretty rainbow like. I've found that we can shoot the .510 at 600-800 yds and its pretty easy to hit once you've worked out the ranging. The arc means your range estimates must be pretty right on. Once you're out past 200yds things drop pretty fast though we've fired .50 cal tracers out over 1000yds and they're still going. This is one reason the .338 lapua is so nice. Its much flatter shooting and with the can its pretty quiet too.


Hope that gives at least a few reasons you might like.
Frank

 

[John D.]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

Brian,

That new pad looks awesome. When my turn comes up in the queue I may switch to that if I can. Thanks.

 

[Mustafa]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Thor2j</div><div class="ubbcode-body">Looking for sling recommendations for SRS??

Using it for carrying, not shooting.</div></div>

I use a TAB Biathalon Sling and LOVE IT! VERY comfortable to carry and great to shoot with slung!

 

[ney1]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

Biffj,
Good information, thanks

 

[RedGoat]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nicholas Young</div><div class="ubbcode-body">Red goat,
I believe there is 300 grain subsonic 338lm which would bridge the gal a bit closer.

Trajectory is an important factor for subsonic ammo too because the amount of adjustment required is significantlylore than standard ammo once past 100 yards. </div></div>

Agreed the .338 has a 300gn bullet; there are also 750+ .510 bullets that will extend that gap back out. I was using Lehigh bullets as the baseline since they have the expandable SS hunting rounds, and that is what I prefer to SS hunt with.

As for trajectory the .510 beat the .338 at range due to higher BC.
300 scenar = 345" drop / 576ft-lbs @ 500y
750 amax = 338" drop / 1503ft-lbs @ 500y

 

[Nukes]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: biffj</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nukes</div><div class="ubbcode-body">What projectiles are being used in the DTA .510 Whisper conversions?

Anybody do relevant gelatin studies? </div></div>


I have no idea if anyone has done testing with the subsonic 510 in ballistic gel.....

Guys who are shooting the 12.7 X 48 (as any setup not made or sold by jd jones is known) are using pretty much any projectiles that will fit the US .50 BMG or any other .510 diameter projos. The round will spit out a 650Gr API at up to 1300fps though they are normally fired at under 1100fps for subsonic use. ...

Hope that answers some of the questions.
here are a few pics

Frank

450gr cast compared to .50 BMG API

</div></div>

Yes. Thanks BiffJ.

Unless it overpenetrates, I would expect better wound ballistics from yaw and tumble with the .50 BMG projectile. That said, it is challenging to select a ½" tunnel through the body that isn't fatal.

 

[Dogtown]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: biffj</div><div class="ubbcode-body">Like Nick noted the trajectory on these subs is pretty rainbow like. I've found that we can shoot the .510 at 600-800 yds and its pretty easy to hit once you've worked out the ranging. The arc means your range estimates must be pretty right on.</div></div>

Exactly - shooting subs at extended distance require MUCH more precision with your range estimation as Danger Space values rapidly shrink. In fact, I would think taking the 12.7x48mm to 1000 yards would give you a danger space of less than 5 yards. That's something 11Cs wouldn't mind

 

[RollinCoal11]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: finbox</div><div class="ubbcode-body">Thanks for all the replies, and more important the many honest PM's.

I will run my trusty 5r till they get the bugs worked out. </div></div>

Hey finbox, I'm about to buy a DTA SRS . Can you explain the bugs. Just want to know before I buy.

Thanks

 

[bmuoio]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: conndcj</div><div class="ubbcode-body">Brian,

That new pad looks awesome. When my turn comes up in the queue I may switch to that if I can. Thanks.</div></div> As soon as I send the new style to a couple guys on teams to give it a go and see how it worked out and if there are a few changes that can be made per there advise I will add it to the line up and will add it to the site. At that time I will ask everyone before I get the exact models everyone wants I will get them made. I'm strongly shooting to make everyone Christmas if you know what I mean. FOR THE GUYS LIKE US THAT HAVE EVERYTHING IT IS THE HARD TO GET THINGS THAT REALLY MAKE FOR A GREAT GIFT

 

[PowerstrokeOBX]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

There was 3 DTAs in "Burn Notice" tonight.

 

[PRDRIVER]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

Truckman11,

The SRS has been out for a few years and the team at DTA has done a great job on the rifle.

The rifle has it's pros and cons, but it is well built and in my experience had provided great accuracy and reliability.

I would be happy to help you with any specific questions you may have on the rifle.

 

[iflylow1959]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PowerstrokeOBX</div><div class="ubbcode-body">There was 3 DTAs in "Burn Notice" tonight. </div></div>

Guess I'm kinda slow. What is "burn notice".
Thx.

 

[coldboremiracle]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: IFlyLow1959</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PowerstrokeOBX</div><div class="ubbcode-body">There was 3 DTAs in "Burn Notice" tonight. </div></div>

Guess I'm kinda slow. What is "burn notice".
Thx. </div></div>
TV show, featuring lots of shoot 'em up action.

 

[pharoh1]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Truckman11</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: finbox</div><div class="ubbcode-body">Thanks for all the replies, and more important the many honest PM's.

I will run my trusty 5r till they get the bugs worked out. </div></div>

Hey finbox, I'm about to buy a DTA SRS . Can you explain the bugs. Just want to know before I buy.

Thanks </div></div>

DTA has only one bug. People that don't own one talking about bugs that don't exist.

 

[iflylow1959]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

Thanks cold bore !! I had a nightmare that they ment the demil burn pile. Now THATs a bad dream.

 

[John D.]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: armsaddiction</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: conndcj</div><div class="ubbcode-body">Brian,

That new pad looks awesome. When my turn comes up in the queue I may switch to that if I can. Thanks.</div></div> As soon as I send the new style to a couple guys on teams to give it a go and see how it worked out and if there are a few changes that can be made per there advise I will add it to the line up and will add it to the site. At that time I will ask everyone before I get the exact models everyone wants I will get them made. I'm strongly shooting to make everyone Christmas if you know what I mean. FOR THE GUYS LIKE US THAT HAVE EVERYTHING IT IS THE HARD TO GET THINGS THAT REALLY MAKE FOR A GREAT GIFT
</div></div>

Christmas would be awesome. Me likey Christmas.

For whomever said there were "bugs" that needed to be worked out with the DTA, I guess we are still waiting for an answer.

I am admittedly a newbie to long range bolt guns but outside of a bullpup not being comfortable for some, I can't find anything wrong with this system. YMMV.

 

[VKC]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Th

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pharoh1</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Truckman11</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: finbox</div><div class="ubbcode-body">Thanks for all the replies, and more important the many honest PM's.

I will run my trusty 5r till they get the bugs worked out. </div></div>

Hey finbox, I'm about to buy a DTA SRS . Can you explain the bugs. Just want to know before I buy.

Thanks </div></div>

DTA has only one bug. People that don't own one talking about bugs that don't exist. </div></div>


Actually, I had a problem with mine but I hesitate in even mentioning it because they took care of it so quickly and it is working well now. The bolt face has a piece of metal that retains the firing pin, and that came loose. DTA said it was a defective batch and they solved the problem already and I believe them.

 

[RedGoat]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

I had the same issue with my bolt face and they have been quick to respond to the issue - DTA has great customer service.

Is this the DTA bug we are looking for?

 

[dixie3bass]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

Did some work up with covet the past few days and thought I would share. Maybe it's too much info or not enough. If it helps great, if not sorry.

Dta covert with 16" 1-8 twist with shark suppressor
Lapua brass, fed 210 primers, varget for propellant

5 shot averages
155 amax 46 gr. 2558 fps
155 scenar 46.5 gr. 2602 fps
Both of these loads were one big hole at 100 yd.
@ 250 yd. with can on they were smaller than 3" sorry but I don't get into the math to figure the numbers and all. I worked up in .5 increments starting with 44.5 and picked the best group @ 100 yd. for the chrono and 250 yd test.

168 amax 44.5 gr. 2491 fps
175 smk 44.5 gr. 2441 fps
Both of these loads were tight at 100 yd but at 250 yd. they weren't as impressive, maybe I need to work up a little more. I might try 45.5 later, I did at 100 but the group wasn't as nice.
I have only been shooting over 100 yards for a little over a year now. Several of my groups at 250 have 3 shots inside a 1" square with a flier or 2. I think it's me trying to get them all in.

As far as subs go,
180 Sierra rn 10 gr. trailboss 1040 fps
220 Sierra rn 12 gr, trailboss 978 fps
190 smk 11 gr. trailboss 1060
I have some 208 amax ordered to try.

Later I will see how they group at 100

I am considering a 260 or x47 barrel. Been reading on both for most of the year. I have about talked myself into 260 due to availability of brass. Now to decide on a factory conversion or a sac barrel.

 

[AZ308shooter]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

Well, I finished reading all 61 pages of this thread. It's been both informative, and also expensive! After getting to actually handle one the other day, I'm sold on DTA! I'm getting a 22" SRS in 308 from George Talia @ Gunslingers!

I'm sure there will be a few more calibers added before too long also.

Now, for a question. I'm thinking about running a Vortex Razor 5-20x on this, and I know that DTA no longer makes a 35mm mount. What is the next best option? Spuhr? Anyone running a Razor with a suggestion?

Thanks in advance for any help.

Bob

 

[Bruiser_Joe]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

i ran my razor until my 5-25 S&B great option on the DTA.

i ran the DTA mount

 

[AZ308shooter]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

Joe,

Does that mean you have a DTA 35mm mount laying around that you no longer need? If so, I'm sure I could find it a good home!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BigJoe</div><div class="ubbcode-body">i ran my razor until my 5-25 S&B great option on the DTA.

i ran the DTA mount </div></div>

 

[Bruiser_Joe]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

hmmm... i'd have to look i don't remember what i did with it

 

[Bruiser_Joe]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

yep i have one, you want it its yours i'm feeling nice tonight

pm me a address i'll send it, i'm a DTA fan and feel like spreading the love

 

[AZ308shooter]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

That's a very generous offer! Thanks!

PM sent.

Bob

 

[Extreme454]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

Awesome! Great gesture.

 

[Bruiser_Joe]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

no prob, what goes around comes around on this site. happy to spread the love.

 

[dbooksta]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dixie3bass</div><div class="ubbcode-body">Did some work up with covet the past few days and thought I would share.</div></div>

Thanks! Could you clarify your COAL for those loads and, if possible water capacity on the cases?

I've had a hard time getting my 16" to shoot well (though I've been focusing on heavier bullets).

(If you don't want this to get lost here I started a thread for loading this barrel over here.)

 

[Nukes]

Re: Idea! Official DTA SRS, HTI, Covert, Hunter Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AZ308shooter</div><div class="ubbcode-body">...and I know that DTA no longer makes a 35mm mount. What is the next best option? Spuhr?...</div></div>

Despite some requests here, currently Spuhr only makes mounts for 30 and 34mm tubes. Fine mounts.