Rifle Scopes Official Zero Compromise Optic News & Updates

I wont rule it out but I would be very surprised. This happened on a 100 degree day with zero water around.

The scope was fine at the start of the session (put 100 rounds down the pipe of my new 223) and by the end whatever this is had happened.
It doesn't need to be around water for this to happen, it happened to my PMII (not that bad it was just one little speck) and they said it was bad grease, or water from bad grease leaking.
 
Tenebraex make´s also nice caps for the ZCO.
K22.JPG
 
Also for those using ARC rings are you torquing to the recommend 55ft lbs
I did but went up slowly. First time I tried I had some binding in the parallax. Did it again going up in stages and it’s been fine since. If you are at all nervous about it, I suggest 45 in/lbs. I have run the scope w this torque w no slippage in the rings and no binding in the scope.

Oh, and I’m sure it’s just a typo but it’s in/lbs and not Ft/lbs.
 
I did but went up slowly. First time I tried I had some binding in the parallax. Did it again going up in stages and it’s been fine since. If you are at all nervous about it, I suggest 45 in/lbs. I have run the scope w this torque w no slippage in the rings and no binding in the scope.

Oh, and I’m sure it’s just a typo but it’s in/lbs and not Ft/lbs.
Thx! Yes I caught the typo and edited it. It should be fixed now
 
  • Like
Reactions: Baron23
Grouse birds hunting started a week ago saturday.
I was able to hunt with my friend, who´s lands i was today.
Very foggy morning, but there was a treat on the tree.
Quess the distance.
Black Grouse.
MPCT1 reticle.
TEERI2.jpg




Picture with out cut the frames, is this.
I have MKMachining flip up, so the image ain´t as nice as it would be with out any object on the scope frame.
SF.jpg
 
Changed my setup from the XLR Element 4.0 Magnesium to the Envy Pro JV this morning, decided to go from the NRL Hunter Lightweight open setup to the NRL Hunter Heavyweight open setup with a XLR Envy Pro with C6. The balance of this setup is amazing - Richard

Weight
XLR Element 4.0 Magnesium 11 pounds 11 ounces with bipod
XLR Envy Pro w/o weights as seen below 14 pounds 1.5 ounces with bipod

IMG-3197.jpg
 
  • Like
Reactions: Baron23 and QS-1911
Have some hard to get options in stock and on the way in FDE and/or Tremor options :)

https://www.cstactical.com/Zero-Compromise-Optic
Zero Compromise Optic ZC420 4-20x50 MPCT3X FDE $3,990.00 in stock!
Zero Compromise Optic ZC420 4-20x50 MPCT3X $3,740.00 in stock!

Zero Compromise Optic ZC527 5-27x56 MPCT1 $3,980.00 in stock!
Zero Compromise Optic ZC527 5-27x56 MPCT2 $3,980.00 in stock!
Zero Compromise Optic ZC527 5-27x56 MPCT2 NLE $4,130.00 in stock!
Zero Compromise Optic ZC527 5-27x56 MPCT3 $3,980.00 in stock!
Zero Compromise Optic ZC527 5-27x56 MPCT3X $3,980.00 in shipping in!
Zero Compromise Optic ZC527 5-27x56 MPCT3X FDE $4,230.00 in stock!
Zero Compromise Optic ZC527 5-27x56 Tremor 3 $4,455.00 in shipping in!
 
Last edited:
  • Like
Reactions: Jefe's Dope
It might look good, when the barrelled action is also cerakoted in same color as the scope.
Thinking of doing the same to the scope mount :unsure:
View attachment 7974199
There has to be some contrast. I think if you cerakote the BA in the same color, you'll either need to leave the mount alone or find a different color to use on it.
 
Dustin Ellerman from The History Channel's top shot and our own @gebhardt02 have some youtube videos on the ZC527 MPCT3X. Nick also goes over the details of the scope, mounting and zeroing as well. Also some great through the scope videos to see what the MPCT3X looks like through the scope for those that have not seen it yet.
 
  • Like
Reactions: gebhardt02
The 4GunGuy did a nice comparison video on ZCO's MPCT2 and MPCT3X, I figure it would be informative for the people that are choosing between these popular reticles. If anyone else has any questions about ZCO's feel free to give us a call at 916-670-1103 :)