Rifle Scopes Official Zero Compromise Optic News & Updates

[pewpew300WM]

My Spuhr - I think it’s the 6602? - has an integrated level. That said I don’t like a small level below the scope; I like the MK tube-mounts.

Yeah the 6002 has the built in level also. I’m looking for something I can view with my opposite eye as I’m shooting.

 

[db2000]

Finally got the tracking information on the zco527 in mpct 3 and my spuhr 6002. It’ll be replacing my vortex razor gen II. What’s everyone running for a bubble level? I’ve looked into the mk machine and other tube mount ones, but seen flatline made a Spuhr mounted setup. Is anyone running the flatline or Spuhr mount level setup on their rig? View attachment 7583330

You’re gonna be blown away.

 

[pewpew300WM]

You’re gonna be blown away.

Zco will be here this Thursday and Spuhr Friday.

 

[Moose]

You will have trouble sleeping Wednesday night thinking about your ZC.And yes you will be blown away.

 

[viking78]

MKmachining bubles are awesome, billet ones specially.
I love the tube mounted, or if you can, you are also able to mount it on picatinny, 2 options.
Package of Tyler is on it´s way, can not wait to mount throw lever and bubles to my ZCO 527 scopes, and those MKM flip ups too

 

[CSTactical]

IMO this is going to be the ticket for bubble levels right here from Flatline Ops with our ZC527 for them to develop it
"

NEXT UP

in development - so close... 36mm Halo-X for the ZCO. Launching Early 2021 - Keep an eye out.

" - FLO

 

[Dooby]

IMO this is going to be the ticket for bubble levels right here from Flatline Ops with our ZC527 for them to develop it
"

NEXT UP

in development - so close... 36mm Halo-X for the ZCO. Launching Early 2021 - Keep an eye out.

" - FLO

Ordered one a few months back! But I wish they made it in their Sniper series!

 

[b2lee]

@CSTactical That scope looks mighty familiar....heh. How many have you sold that were cerakoted? I get bored of the black scope.

 

[Dooby]

@CSTactical are the Halo levels shipping yet? Noticed my bill is only 97% paid...and I recently changed my credit card #.

 

[CSTactical]

@CSTactical That scope looks mighty familiar....heh. How many have you sold that were cerakoted? I get bored of the black scope.

Quite a few, but that one is ours

@CSTactical are the Halo levels shipping yet? Noticed my bill is only 97% paid...and I recently changed my credit card #.

Not yet, we will notify everyone once it's shipping to us

 

[viking78]

Sweet friday lads.

 

[Tex68w]

Yeah the 6002 has the built in level also.

Some do, some don't and I don't know why. If you look at the 6002 on Spuhr's website it says "Note: does not come with bubble level."

My 6002 does not have a level and it looks just like the one on the Spuhr Web Shop but there are some here with 6002's that do have a built in level. I don't know when this change was made but it seems odd.

 

[pewpew300WM]

Some do, some don't and I don't know why. If you look at the 6002 on Spuhr's website it says "Note: does not come with bubble level."

My 6002 does not have a level and it looks just like the one on the SPuhr Web Shop but there are some here with 6002's that do have a built in level. I don't know when this change was made but it seems odd.

Yeah I just received mine and it has the built in level. I like the idea of the spuhr mounted one or flatline ops one but for a simple 2 bolt plate and level it’s $100. Seems a bit pricey for sure.

 

[Tex68w]

Yeah I just received mine and it has the built in level. I like the idea of the spuhr mounted one or flatline ops one but for a simple 2 bolt plate and level it’s $100. Seems a bit pricey for sure.

I like the Tango SM that mounts to the Spuhr mount and then folds out of the way when not in use. The other option is the LRA Send It with the Spuhr mount, it's digital and more than double the price with the Spuhr bracket but it's pretty easy to read and still provides a mechanical level as well.

 

[TheRealMongo]

So....I saw way earlier in the thread where someone already asked jokingly I believe, but seriously what's the chances of working out a trade in deal for one of these ZCO 527's? LOL

 

[db2000]

I like the Tango SM that mounts to the Spuhr mount and then folds out of the way when not in use. The other option is the LRA Send It with the Spuhr mount, it's digital and more than double the price with the Spuhr bracket but it's pretty easy to read and still provides a mechanical level as well.

Yeah, it’s a shame the Tango SM isn’t less than half that price. I mean, get real. At some point it’s just calling a spade a spade.

 

[Tex68w]

Yeah, it’s a shame the Tango SM isn’t less than half that price. I mean, get real. At some point it’s just calling a spade a spade.

???

 

[azpaul]

SP-6601 Spuhr mount on SRS-A2 with 527

 

[pewpew300WM]

Finally got it all mounted and torqued!

 

[viking78]

MKmachining flip up covers, throw lever and 36mm billet buble mounted, top notch quality guys.

 

[viking78]

New suppressor testing day.

 

[pewpew300WM]

Decided to try out the OBI grip on this build and it’s pretty awesome.

 

[Tex68w]

I want to give a big shout out and thanks to Richard and his crew over @CSTactical for helping to make sure that my optic arrived in time for a class this weekend. I can't recommend these guys enough, they more than exceeded my expectations by jumping through hoops to meet a tight deadline. First rate customer service and now they've earned my business for life. I am looking forward to getting to the range tomorrow to get this bad boy sighted in.

 

[CSTactical]

You're very welcome @tex68w !!!

 

[CSTactical]

Flatline Ops Halo X 36mm Bubble Levels in stock!!!

Flatline Ops Halo-X Scope Level

CS Tactical - High Quality Optics including Zero Compromise Optics, ZCO, Zcompoptic, MRAD, 20 MOA. See our selection and get expert advice on the perfect scope for you.

www.cstactical.com

 

[Maggot]

Flatline Ops Halo X 36mm Bubble Levels in stock!!!

Flatline Ops Halo-X Scope Level

CS Tactical - High Quality Optics including Zero Compromise Optics, ZCO, Zcompoptic, MRAD, 20 MOA. See our selection and get expert advice on the perfect scope for you.

www.cstactical.com

View attachment 7600424

View attachment 7600425

That bubble looks off .00000000000001 nanometer.

 

[Ordnance Locker]

A little dry fire in the driveway...

 

[Tex68w]

If I did that in my driveway the cops would be there in 3 minutes lol.

 

[110len]

.300WM 20in. Proof hunter

 

[Tex68w]

I ran the ZC527 MPCT3 in the CR2/Galli class this weekend and it was outstanding. Everyone that looked through it was wowed and it most certainly had the best image through the mirage at 800. We ran an unknown distance drill and I employed the Fallopian Funnel of Death to mil/measure my targets and it worked extremely well getting me first round hits out to 700-ish. I couldn't be happier with this piece of glass, she's a keeper.

 

[CSTactical]

I ran the ZC527 MPCT3 in the CR2/Galli class this weekend and it was outstanding. Everyone that looked through it was wowed and it most certainly had the best image through the mirage at 800. We ran an unknown distance drill and I employed the Fallopian Funnel of Death to mil/measure my targets and it worked extremely well getting me first round hits out to 700-ish. I couldn't be happier with this piece of glass, she's a keeper.

Awesome

 

[runningbear]

SP-6601 Spuhr mount on SRS-A2 with 527
View attachment 7588062

Hawt

 

[Tex68w]

This thing blows me away at distance.

 

[runningbear]

This thing blows me away at distance.

Is it me, or do they seem to punch through mirage pretty well? Mine seems to handle mirage better than my NF

 

[Tex68w]

Is it me, or do they seem to punch through mirage pretty well? Mine seems to handle mirage better than my NF

So much better through the mirage than S&B, NF, Razor HD, Steiner, Kahles.

 

[viking78]

Will see that in this summer.
They did impressed me on misty shit, it was pritty stiff one at this day.

 

[Tex68w]

Love how much more pronounced and deeper the tone of the 260 Rem thud is in comparison.

 

[NiteQwill]

 

[Guthwine]

Is that the regular or the PRS length Ckyepod?

 

[CSTactical]

We have on ZC420 M3 in stock! Give us a call at 916-670-1103x2 to grab this one

 

[NiteQwill]

Is that the regular or the PRS length Ckyepod?

Regular. PRS is too short.

 

[viking78]

What rifle? .

 

[Ordnance Locker]

Some quick ZCO porn...

 

[Tex68w]

I like that Kifaru ruck

 

[Ordnance Locker]

I like that Kifaru ruck

Yeah, it's quickly becoming one of my favorite packs.

 

[JohnTheFisherman]

So I’m having a small issue with my zco/mpa matrix. I need my scope to move back a skosh for proper eye relief but I’m out of room.
I’ve shortened my lop about as far as it will go, moved my rings back as far as they will go, and slid the scope back as far as I feel comfortable. I don’t want to move the rings any closer to the turrets. I’m using a zco-527 in ARC rings on a vudoo v22 in a mpa matrix chassis. The vudoo uses a proprietary rail so getting a different one isn’t an option. any ideas on other mounting options?

 

[JohnTheFisherman]

as you can see my rear ring is as far back as it’s going to go so my only option would be to slide the scope back. Right now there’s about 1/4 inch left to slide before it hits.

 

[littlepod]

as you can see my rear ring is as far back as it’s going to go so my only option would be to slide the scope back. Right now there’s about 1/4 inch left to slide before it hits.

I had the same issue, I ended up just shortening my LoP. Right now I have my turrets basically touching my rings, and haven't noticed any sort of binding issues. (I'm running a Spuhr though).

 

[JohnTheFisherman]

I had the same issue, I ended up just shortening my LoP. Right now I have my turrets basically touching my rings, and haven't noticed any sort of binding issues. (I'm running a Spuhr though).

View attachment 7613380

I actually got the arc rings because they were the thinnest 36mm out there. I noticed on pics with larger mounts there’s about zero room for adjustment.
my lop is as about as short as I can get it while still being comfortable. I think I could shorten it another 1/8” maybe.
I wish the tube was about 1/4” longer.

 

[StrayDog]

Get the MPA short LOP butt plate.
What's your true LOP?
MPA and MDT run long imho... ymmv, etc, yadda,