Shout out to @CSTactical for stellar CS, as usual.
New boxes are a nice shade of gray
New addition: patch & battery cap removal tool
You're very welcome again, you're one of the first customers to have the MPCT3X reticles in the country
Rifle Scopes Official Zero Compromise Optic News & Updates
- Thread starter gebhardt02
- Start date
You're very welcome again, you're one of the first customers to have the MPCT3X reticles in the country
New turret cap tool? or hidden in the box somewhere like the allen wrench?Shout out to @CSTactical for stellar CS, as usual.
New boxes are a nice shade of gray
New addition: patch & battery cap removal tool
Unless it was in the first round of ZCOs... This tool is definitely new to me.
My older one came with the tool along with the new one that showed up today
The old tool was stamped ZCO, the new tool is hollowed out ZCO like a stencil, sweet swag key chain...
Checked my old boxes... No tool! Meaning this is a double present for me!
MPCT2 the reticle i like.
All the ZCO reticles are top notch on the center area.
I just love that floating dot, it makes the accurate shooting so much easer, like i did with my CTR.
Tested the barrel after +4000 rounds, still 0.3 MOA.
All the ZCO reticles are top notch on the center area.
I just love that floating dot, it makes the accurate shooting so much easer, like i did with my CTR.
Tested the barrel after +4000 rounds, still 0.3 MOA
.
I guess I can post a pic of my ZCO (and whole new rifle for that matter) 5-27 with the mpct3 reticle, I absolutely love this thing! Shot my first match with the new set up Saturday and really enjoyed it. Thanks again CS tactical.
Attachments
Guys, keep up the good work.
Im out of the force for a weeks now.
Busted my trigger hand 11 days ago, hand was on fiberglass cast on a week, but the bone on the hand was not in the right angle.
So they are going to put some steel to it.
Was on hospital today for a 8 hours, and go back tomorrow, maybe they have time to fix it then....
Im out of the force for a weeks now.
Busted my trigger hand 11 days ago, hand was on fiberglass cast on a week, but the bone on the hand was not in the right angle.
So they are going to put some steel to it.
Was on hospital today for a 8 hours, and go back tomorrow, maybe they have time to fix it then....
That car is worth 200 of those scopes, to put that picture in perspective. Probably significantly more now with the limited numbers, if you were lucky enough to get an allocation. Scope looks great, as always.
I watched a black dude pull this off a trailer. An old white guy got in and drove it around downtown Chicago. Worse place ever IMO to drive a hypercar.
Agreed. Big cities and hypercars are a terrible idea. Give me canyons to carve!
I'm all game for a test with some of yours burt, what ya say?
Maryland right? Only a few hours away, I'll drive and bring the coffee.
Maryland right? Only a few hours away, I'll drive and bring the coffee.
The locking turrets and the hash marks are the only thing I wish was different on my 5-27. The Nightforce Atacr turrets are much easier to read for me with the bolder hash marks, brighter white and longer lines. I really like the .5 hash mark with the number above it on the Atacr as well.
Good deal here for you guys with long distances to play in
www.snipershide.com
Accessories - Spuhr 61602
Like new condition SP 61602 - $335 shipped ($75 off of retail). Paypal FF or buyer pays fees. Can also take Venmo or Cashapp if needed.
www.snipershide.com
I'm gonna say something... It's really a dick move to show up on another companies thread posting up videos for their competitor to promote them. I like Nightforce, I consider Sean a friend (the guy shooting in that video), but that's just a passive aggressive crap on this thread. You could have simply asked the question, without throwing all that out to give praise to their competitors scope. SMH...
If you're going to use quotation marks, you should probably actually quote what was said, as I never used the word "bash" in any part of my statement. Second, your prior remarks do not negate the FACT that you literally shared 3 videos from NF in the ZCO thread, then went on to praise your NF 2.5-10. As for your meme... do better, because I'm pretty sure that's from like 2016.
I have a 4-20 MPCT3x incoming. Looking forward to comparing it to my 4-20 MPCT2.
I think you're going to be highly impressed. Let us know after you've compared them a bit.
True story so far during a 2 day AG match... The ZCOs won't allow you to score more points but it WILL allow you to see your misses clear as day! Pretty impressed with the MPCT3X, it was a step in the right direction for reticles.
Pretty impressed with the MPCT3X, it was a step in the right direction for reticles.
Speaking of the M3X...We have one ZC527 M3X and two ZC420 M3X's remaining and more on the way Send us a PM, email@[email protected] or call 916-670-1103 https://www.cstactical.com/Zero-Compromise-Optic
Send us a PM, email@[email protected] or call 916-670-1103 https://www.cstactical.com/Zero-Compromise-OpticThanks man, just saw you shared this. Appreciate it. Actually still available! Surely someone needs it, right??Good deal here for you guys with long distances to play in
Accessories - Spuhr 61602
Like new condition SP 61602 - $335 shipped ($75 off of retail). Paypal FF or buyer pays fees. Can also take Venmo or Cashapp if needed.
The main thing I’m not enamored of on my ZC527 MPCT2 (other than weight, but that’s not an issue) is that it’s a pain in the butt to align the turret to the locking teeth after setting zero.
Specifically, you need to lift/unlock the turret to allow you to loosen the screws that let you set the zero point, but once the zero is aligned-ish you need to fully align the lugs by locking the turret again, then unlock again - without rotating a fraction of a degree - to tighten the screws again. I am not capable of unlocking the turret without rotating it a fraction of a degree, so my lock/unlock is a bit sticky.
I'm pretty sure I tighten the screws when it's locked. You sure you can't just tighten them when the turret is down?
I've rezeroed my turrets a few times and never had issues with the nuances of the locking turret.
I wouldn't mind having a NLE though because I really don't need a locking turret and when I'm in position trying to adjust the elevation turret, I have a tendency to put downward pressure on the turret as I turn (mainly when I'm in the prone position).
I wouldn't mind having a NLE though because I really don't need a locking turret and when I'm in position trying to adjust the elevation turret, I have a tendency to put downward pressure on the turret as I turn (mainly when I'm in the prone position).
Same. These turrets are the easiest and most repeatable in terms of resetting zero I’ve used. I don’t compete but like shooting from stages in practice sometimes and seems downward force sometimes is more natural. Or I just go to turn them, because my SB and a few others are non-locking, and it doesn’t turn. Then causing another step. Ultimately, not a big deal and I like the idea of having the option. Otherwise I can just leave it unlocked.
???
To adjust zero, you unscrew the screws. Align. Tighten screws. Push down. Loosen then retighten screws to 6-10 in/lbs.
There is no reason to unlock the turrets once you lock again.
Maybe I'm reading your procedure wrong but it seems off. I have not had this issue and I've owned 4 ZCOs.
Similar threads
