Powder IN-STOCK thread
- Thread starter x2cross
- Start date
and gone lolGO!!!
Federal Premium Gold Medal Large Rifle Match Primers #210M Box of 1000
The same quality primers that make Gold Medal cartridges the choice of match shooters and hunters everywhere. Federal Gold Medal Primers are...www.midwayusa.com
Midsouth shooters supply. Free shipping over $99. Free shipping code (FS317) Free Hazmat (FHM317).
Magtech primers at .05 a piece. Not as good a price as the RAUG but better than I've seen for a while.
Magtech primers at .05 a piece. Not as good a price as the RAUG but better than I've seen for a while.
Surprised its still available. Its been there since yesterday. I grabbed some BE-86 yesterday when it all dropped
Received my Unicorn 
turds from Midway. Damn it’s nice to see stuff dropping again.
turds from Midway. Damn it’s nice to see stuff dropping again.
How long does AR take to ship powder? Bought 8 pounds of 1680 on Friday with some .360 brass. Brass has shipped, but nothing on the powder. Just curious no real "need" to have it here.
Usually pretty quick every once in awhile it takes a week to 10 days but I ordered BE-86 2 days ago and it's being delivered tomorrow
Last edited:
Scheels has 10% off bullets, powder & primers until Sunday
Shows $49.99 for me.. And once added to cart with $12.95 shipping and $22.99 hazmat they come to $85.93 to your door.
5000 with shipping and hazmat are $292.89 to your door....
Winchester #41 Small Rifle NATO-Spec Military Primers #41 Box of 1000 | Powder Valley Outdoors
Winchester #41 5.56 Military Reloading Primers have a slanted anvil and harder cup making them ideal for AR style rifles. Exclusive to Powder Valley!
www.powdervalley.com
Lapua CenterX In Stock @ Bullet Central, Mile High and Creedmoor Sports
www.milehighshooting.com
Lapua: Center-X .22 LR Ammuntion, 500/Brick
The Lapua Center X 22LR round gives you the confidence of high quality .22 LR match ammunition. This is widely used by rimfire enthusiasts around the world.
www.milehighshooting.com
Graf & Sons still has BE-86 on clearance for 1lb canisters. $29. In stock.
The 8lb were on clearance for a bit, but have gone back to regular $.
$1-$2 more than American Reloading MP205 (5 vs 10lb keg) - if you can finagle a "free" ship/haz on a Graf order.
Graf has a running free haz/free shipping deal if $250 of NON CLEARANCE reloading stuff in order.
The 8lb were on clearance for a bit, but have gone back to regular $.
$1-$2 more than American Reloading MP205 (5 vs 10lb keg) - if you can finagle a "free" ship/haz on a Graf order.
Graf has a running free haz/free shipping deal if $250 of NON CLEARANCE reloading stuff in order.
American Reloading has a good amount of projectiles in stock.
Good selection of .224, .243 & .264.
108 ELDM at 22¢ a piece isnt terrible.
Good selection of .224, .243 & .264.
108 ELDM at 22¢ a piece isnt terrible.
Looks like H4895 is finally making a comeback.
Came back in stock at my LGS today. Grabbed 2 8lb jugs for $348 each
Came back in stock at my LGS today. Grabbed 2 8lb jugs for $348 each
Damn, I was hoping you would say AR lol. I need 4895 but I don't want to pay inflated prices.
Damn, I was hoping you would say AR lol. I need 4895 but I don't want to pay inflated prices.
I wish.
I do have some H4895 AR equivalent from 2019 that's excellent though. Haven't seen any since....
277 Fury / 6.8x51mm SIG Primed "Hybrid" Case - 100ct
ALL CASES CONTAIN STUCK POWDER Pulled, Primed Brass - Casings may contain minor dents/scratches *All casing should be resized prior to loading
americanreloading.com
I just received my American Reloading .243 Hornady 105 BTHP pulls and they look good. For as stupid cheap as they were, these are going to be great for 6 ARC loading..
Ive shot a lot of these in 6BR over the years from Hornady (not AR pulls) and they have been an awesome long range bullet for shooting steel. Ive shot some stupid small groups with them at 800yd...
Glad I grabbed a bunch of these.
Ive shot a lot of these in 6BR over the years from Hornady (not AR pulls) and they have been an awesome long range bullet for shooting steel. Ive shot some stupid small groups with them at 800yd...
Glad I grabbed a bunch of these.
I did as well with the 105's but only the 105s showed up today. Ill shoot the 85's out of my 22BR which loves 85.5 Berger and 90SMK....
Do you have any clue who makes those 85s we bought?
I guess I could build an ARC or I've always wanted a dasher/GT. I now have bullets to use as an excuse to build that 22cal.
My guess is 85gr Barnes Matchburner or 85gr Nosler RDF.... Those are the only 2 I know of... Wont know until they arrive because they have different bullet profiles.
I don’t even need H4895 but I checked the Bruno website and it was pretty much ground to a halt presumably from high traffic
ETA its' far easier to google it - 1# (>10 of them) still available but for $58 each - ouch
ETA its' far easier to google it - 1# (>10 of them) still available but for $58 each - ouch
Last edited:
It seems like whoever doesn't have 8208 is running free hazmat haha
8208 is also at my LGS. Seems they dropped everywhere. 8208, H4895 and Varget but Varget 8# have been in stock for a while now.
Just to get an idea, is it comparable in price to the MidwayUSA pricing? I have one 8 pounder in cart and comes out to close to $450ish.
Don't know if I want to pay that or just get benchmark or n133 for cheaper.
No, not even close.
8208XBR, H4895 and Varget 8# jugs are $340.19. I literally bought them Wednesday
**EDIT**
Sorry, $340.19 I just checked my receipt (+6% sales tax of course)
Varget's been back in stock regularly for over a year now. Price has gone up a little bit...
H4895 and 8208 just came back in stock a couple days ago... So check with all your LGS to see what they got in or are getting in...I was just setup on a auto notify when back in stock and got an email Wednesday.
I have varget. Have had varget for like 5 years. I just don't need more. I need something that's temp stable and clean burning to load the grendels with. I can get TAC, BLC2, CFE223, but I'm still keeping an eye out for a decent stick powder.
I'd love to stock up on some 8208 but just can't pull the trigger @ $450ish. Ordered some N140 to try since it's a little better on price.
Similar threads
