Precision Rifles.....show em!!

[Tokay444]

Perfect that’s good to know, I don’t over care about the engraving either. I have a 223 prefit for a tl3 that is under the bell of the scope and my ks em precision 25 creed engraving is covered by the krg enclosed forend. I’ll definitely be ordering some prefits then!

Oh, yeah. Anything to cut that Curtis fanboi out of the loop. KS on the other hand are phenomenal to deal with.

 

[mike.collard]

View attachment 7586390
View attachment 7586406
FN SPR A5M XP 20” .308win
NX8 FFP 4-32 Mil-C
OPS Titanium 20MOA rail
ARC rings
Area 419 12” arcalock rail
MCARBO trigger spring
TBAC Ultra 7 CB
Atlas CAL w/ 419 clamp

That's hot. Beautiful rifle.

 

[DocRDS]

Me Joining the 21st Century. Its all very Boomer:
Rem 700 Sendero 308 Circa 2000
KRG Bravo
Bushnel Elite
Harris (Sorry, the 6.5 got the Atlas)
Dead Air Sandman

 

[Individual1]

Ding.

 

[BuLLet]

Added this to the heard last year, just got it scoped today and shot it for the first time. Bore sighted, and instantly on paper @ 200 yards.

Sako TRG M10, 300 Win Mag 190 grain Federal Gold Medal Match. Sweet rifle, added the Sako brake and I could stay on target 100% after each shot.

Ended up getting a bunch of barrels from Beretta during their 40% off sales, 338 LM, 300 WM, 308 and 6.5. Extra bolts too!

 

[DEWD_STUFF]

Was doing barrel swaps last night. This action has worn some different stocks, chassis and scopes the past 4 years but this is the current configuration.
Bighorn TL3
26” PVA .223
18” PVA 6.5cm
XLR envy pro
Leupold mk5 HD
Hawkins Precision rings

 

[onethousandmeters]

Added this to the heard last year, just got it scoped today and shot it for the first time. Bore sighted, and instantly on paper @ 200 yards.

Sako TRG M10, 300 Win Mag 190 grain Federal Gold Medal Match. Sweet rifle, added the Sako brake and I could stay on target 100% after each shot.

Ended up getting a bunch of barrels from Beretta during their 40% off sales, 338 LM, 300 WM, 308 and 6.5. Extra bolts too!

View attachment 7606573

View attachment 7606574

View attachment 7606575

View attachment 7606576

That is an awesome setup! Thanks for sharing!

 

[BigSkyRF]

My latest rifle is in, and I hope to shoot it tomorrow. I ordered a barreled action from Caleb at Alpha and Omega and my God it impressed me. I can't recommend him enough... my 9yr daughter wants to use this one for her black bear this year now.... even she is smitten with it. The Rex Silentium can matches so well..

How do you like the Rex can?

 

[BigSkyRF]

Most recent Build

26 Bartlein 6GT barrel
Impact 737R
MPA Comp
Triggertech diamond
Kahles 6-24 SKMR3

 

[JasonPaul]

My beginnings in Precision Shooting.

TC LRR in 6.5 Creedmoor
US Optics TS20X
Spuhr Ideal Mount
Atlas PRS Bipod w/Defy lever
MDT Vertical Grip
APW Muzzle Break

I plan to build another rifle later this summer and transfer most of the parts over using the MDT ACC chassis. Just not sure what caliber yet, might stay with 6.5cm since it’s so much fun.

 

[NaciremaToirtap]

.260 Ackley
Rem 700 modified by LRI
Shilen 1:8 4 groove ratchet 19” full length, 15” exposed, fluted by LRI
PVD coated action and barrel
AE30
XLR Envy Pro
Mini Pro ARCA plate
Warhorse Cleat bag
Atlas PSR
Flat TriggerTech Special
LaRue 20 MOA Extended rail
Spuhr 5006
Leupold Mk5 HD CCI

The AR is a .556 of course
Knight’s SR15 E3 14.5” 1:7 hammer forged barrel with custom AE mount
AEM5
SLR Adj gas block
Knight’s gas tube
Knight’s E3 bolt, firing pin, and cam
JP LMOS carrier
JP SCS H3
Ace SOCOM stock
Rock River form 4 lower
Hiperfire PDI flat bow
Aero upper
LMT ch
PRI tube
Atlas PSR
PRI Recon
Badger rings
Leupold Mk4 TMR w/ M5 mil turrets

 

[ClintQuint]

New to me
My first PRS set up
MPA 6 creed
First day at the range - Love it!

 

[HenryTheAce]

Just got in my TS Customs full build and set it up. Range time next week!
- LP Fuzion
- Manners EH1A
- Benchmark 18” carbon chambered 6.5cm
- Kahles 318i SKMR3 / ARC rings
- TBAC Ultra 9

 

[Steel head]

Fresh paint
My 7SAUM/338 edge rifle

 

[Tokay444]

The latest step in the evolution of this rifle.

 

[Bakwa]

Just got in my TS Customs full build and set it up. Range time next week!
- LP Fuzion
- Manners EH1A
- Benchmark 18” carbon chambered 6.5cm
- Kahles 318i SKMR3 / ARC rings
- TBAC Ultra 9View attachment 7610106View attachment 7610107

Dang dude. I almost just want to see pictures of that pool room. Very classy.

 

[6MT]

6.5 Creedmoor
Cadex CDX-30 action
Tac30 chassis
Kreiger (#11) 1.25” straight 1:8” finished at 28”
Heathen 5 port brake
Timney CE trigger
Ergo grip
LRA Light Tactical bipod
NightForce NX8 4-32x50
Sphur SP-3602 (+20.6moa)
US Optics level
ARCA tripod mount

 

[tlr16]

A few I changed up. I just picked the KAC up during my deployment the only one I have trigger time on is the Surgeon (Blue). The defiance just got a new scope. I have a CZ457 in the works due to a bad shoulder I wanted something with less recoil.
Baldwin Gun Works Defiance Deviant 6.5 24" Bartlein Barrel, Timney Trigger, Manners T6, Area 419 Rail, Area 419 Brake, Bushnell DMR Pro (Sold the Kahles)
Baldwin Gun Works Surgeon 223 24" Bartlein Barrel, Timney Triggers, Manners stock, Area 419 Rail, S&B PMII
Knights Armament ECR with Geissele Trigger NF NX8 4-32
CZ 457 Manners custom manners stock, Area 419 rail, Area 419 Scope mount, Bushnell DMR (At Baldwin Gun Works now)

 

[THEIS]

 

[Floridaman]

Ar 50
Savage 338 Lm

 

[chief74]

SSG69 Pllk

 

[TheChief]

Just a Tikka Tac A1. Nightforce 20MOA Unimount and a Vortex Viper PST Gen 2 5-25 for now. I'd like to upgrade the glass later, but it shoots very well for a factory rifle with factory ammo so I'm not in a hurry to swap it out. Atlas V8 Bipod. Completely factory rifle. It really likes the Sig 175's but so far its shot everything nearly as well as those, but they get the edge.

 

[onethousandmeters]

Just a Tikka Tac A1. Nightforce 20MOA Unimount and a Vortex Viper PST Gen 2 5-25 for now. I'd like to upgrade the glass later, but it shoots very well for a factory rifle with factory ammo so I'm not in a hurry to swap it out. Atlas V8 Bipod. Completely factory rifle. It really likes the Sig 175's but so far its shot everything nearly as well as those, but they get the edge.
View attachment 7614469

That is an awesome rig. Thanks for sharing!

 

[TheChief]

That is an awesome rig. Thanks for sharing!

Thanks! I won't be doing much else to it. I'd like to swap the bolt hand out for a swept back ball handle, and possibly get the bolt fluted. I'll also be putting a 0 angle grip on it, but functionally I'm very happy with it.

 

[Bigrederic]

Well did a thing and decided to give 6GT a go... love how it looks in this stock. And itnis my first go with a Terminus

 

[BuLLet]

Congrats on the new rifle. What's that mount in front of the magazine? How is it attached?

Well did a thing and decided to give 6GT a go... love how it looks in this stock. And itnis my first go with a TerminusView attachment 7615565View attachment 7615566View attachment 7615567

 

[Bigrederic]

Congrats on the new rifle. What's that mount in front of the magazine? How is it attached?

It is a factory installed baricade stop.

 

[BuLLet]

Interesting, never seen one like that. Can you move it forward/back?

It is a factory installed baricade stop.

 

[Bigrederic]

Interesting, never seen one like that. Can you move it forward/back?

Nope, it is bedded in as part of the Mini Chassis.

 

[BuLLet]

MCS-DBM Barricade Mini Chassis, this one?

Nope, it is bedded in as part of the Mini Chassis.

 

[Bigrederic]

Yup

MCS-DBM Barricade Mini Chassis, this one?

Yup

 

[TheChief]

Well did a thing and decided to give 6GT a go... love how it looks in this stock. And itnis my first go with a TerminusView attachment 7615565View attachment 7615566View attachment 7615567

Damn, thats a hell of a nice looking rifle! Who built the rifle for ya? I really dig that stock.

 

[Bigrederic]

Damn, thats a hell of a nice looking rifle! Who built the rifle for ya? I really dig that stock.

Area 419 spun the barrel and I bought the stock from them a year or so ago... and then a friend helped torque the barrel on. This is my first one based on a prefit.

 

[TheChief]

Area 419 spun the barrel and I bought the stock from them a year or so ago... and then a friend helped torque the barrel on. This is my first one based on a prefit.

Nice. I love Area 419's stuff. They're great. I didn't know they made stocks as well, good to know.

 

[Bigrederic]

Nice. I love Area 419's stuff. They're great. I didn't know they made stocks as well, good to know.

Sorry about that the stock is a Manners PRS, in Arctic.

 

[TheChief]

Sorry about that the stock is a Manners PRS, in Arctic.

Ok, gotcha. I've been looking at a mesa precision in glacier for a Tikka CTR I've got. I like that camo pattern.

 

[BuLLet]

That camo also fits perfectly among the rocks and shoreline.

Ok, gotcha. I've been looking at a mesa precision in glacier for a Tikka CTR I've got. I like that camo pattern.

 

[Mojo0254]

Well did a thing and decided to give 6GT a go... love how it looks in this stock. And itnis my first go with a TerminusView attachment 7615565View attachment 7615566View attachment 7615567

You built pretty much the same rifle I'm getting ready to build. Who did your barrel?

 

[Bigrederic]

You built pretty much the same rifle I'm getting ready to build. Who did your barrel?

Area 419 cut the barrel

 

[Mojo0254]

Area 419 cut the barrel

Nice. I’m going to have DST do mine. I can’t wait. Other than some color stuff yours is pretty much what Im about to build. How do you like the Zeus?

 

[Bigrederic]

Nice. I’m going to have DST do mine. I can’t wait. Other than some color stuff yours is pretty much what Im about to build. How do you like the Zeus?

I have not shot this one yet... I have done some dry fire practice with it though. Hope to do load development soon. I will be shooting my 6.5 Creed tomorrow, to finish up its load development. I have a problem with having rifles built. I have another already in the works...

 

[BuLLet]

That's not a problem. I would call it a good investment!

I have a problem with having rifles built. I have another already in the works...

 

[Shortpeg]

What I have on the phone.....minus a few.
Rifle: defiance rukus xm
284 win
Bartlien 1:9 25" light palma
Manners eh1
Trigger tech
Mdt mags
Silerco asr (still waiting on the can)

Pistol: rem xp100
338 lapua improved (Allen Xpress)
McMillan stock
Lilja 18" bbl Kirby Allen stalker contour
Don't know the brake

Both wear 3.5-15 NF nxs

 

[Nics00ss]

 

[Elemental]

Here is my latest addition to my collection .

Barrett 98B Tactical .308 with 16" barrel
Scope : Nightforce NXS 3.5-15x50 F1

Took it out for the first time today and it shoots great. Very soft shooting . Ergonomically , it fits me very well and has an exceptional trigger . The bolt lift is stiffer than my AI AW, but I am guessing it will get easier in a short time . It also weighs significantly less than my AIAW. The magazine is arguably better than the AIAW, I really think Barrett magazine is near the top of its class.

I replaced the stock Barrett muzzle brake with a Silencerco ASR muzzle brake as I will be running this rifle with a Silencerco Saker 7.62 ASR.

I traded a Colt/ Cooper M2012 for this rifle an I have no remorse whatsoever except that Euro Optic recently blew out some MRADs at heavy discount and I might have preferred an MRAD.

Sent from my iPad using Tapatalk

Beautiful weapon. Long been a fan of 16-18" barrels

 

[fatmat27]

R700 308 22" 5R
MDT ESS
Timney CE 2-stage
S&B 5-25
EraTac mount
Atlas CAL
usually wears a Surefire can

I'd like to eventually upgrade the barrel/action.

 

[Steel head]

 

[TheChief]

View attachment 7621098

Savage Elite Precision?

 

[Steel head]

Savage Elite Precision?

You hurt my feelings!



It’s a ARC Nucleus in a modified XLR element with a barrel I chambered in 338 edge

 

[StrayDog]

More Manners Arctic camo, got the NRLH rifle dialed in today, 15.75-ish lbs, slinging factory Prime 6.5cm 144 smks at 2675, lololol